Your cart is empty.
Your cart is empty.Product Description
Dominator Cycles is a manufacturer of premium quality and distinctly styled motorcycle parts and accessories. All of our products are designed and made in the USA and our five-star customer support, customized products, and limited lifetime coverage will make Dominator a partner you and your bike can partner with for years to come.
All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment.
All of our parts are hand-made in the USA employing a multi-step manufacturing process using the finest materials. We pride ourselves on being a manufacturer of premium quality and distinctly styled motorcycle parts and accessories.
- Lifetime Coverage against manufacturer defects
- All bars are Fully TIG Welded
- Beveled & De-Burred
Superior Quality
There have been many copycat attempts to replicate our products but many customers over the years have come back because of our superior quality.
We also pride ourselves in our smooth and clean arched corners whereas competitors often use straight sharp edges which are easier to manufacture but fall short of the premium styling distinguishing riders’ demand.
- Carefully designed to provide natural, relaxed grip angles
- Optimal pullback comfort
- Direct bolt-on replacements for stock equipment
- Hassle-free installation of bar tubes
Dominator works on the principle belief that riders want the best of the best with no compromises. Ride comfort and easy installation make choosing Dominator Industries handlebars to customize your bike a no-brainer.
All in 1 Handlebar Kits!
Dominator Industries has partnered with Cable Kits Brand to create a one-stop handlebar kit solution. These kits are strictly comprised of components manufactured in the United States. It’s everything you’ll need to complete a quality bar install.
The Original Pre-Wired
What is it worth to have your project be as simple and easy as possible? We feel it’s worth everything so we’ve gone ahead and done all of the hard work for you. Our bars are prewired with your switch wiring and set up with the ability to pull your existing twist grip sensor in literally under 10 minutes!
Saves Money
We all know what the dealer charges to switch out and wire your bars, or any experienced tech! We’re extremely confident that we can save you hundreds of dollars! Who doesn’t wanna save money!?
Remove the Headache
Those of us who have swapped our bars know, beyond a shadow of a doubt, that wiring new bars can be a daunting task. Because of this, we set out to fix that and provide you with solutions that virtually eliminates the headache.
For many bikers riding a motorcycle is not a hobby or need, it’s Passion.
We get that. The sheer enjoyment of being on a motorcycle with the open air with the wind brushing through your face, the sound of the engine and the vibration you feel. It’s an embracement of the senses and what we try to convey into every Dominator product.
TR
Reviewed in the United States on January 16, 2025
nice setup. hard to get wires through. over all they are worth the money
steve ehlman
Reviewed in the United States on November 19, 2024
Work great on my 2023 street glide special and wires plug in perfectly .
Donald Scherry
Reviewed in the United States on October 26, 2024
Great
DEVON
Reviewed in the United States on August 9, 2022
Very easy install with the prewired option. The twist grip sensor instructions that came with the bars made the install super easy. I put them on my 2016 street glide special. I would suggest while you're in there that you change the riser bushings to polyurethane bushings. I also changed my upper riser clamp out with the gorilla grip upper riser clamp made by Hill Country Customs which has 3 set screws on the top of the clamp. There is zero back and forth play in the bars. Another thing that I will mention is that I used the existing stock brake and hydraulic clutch lines with plenty of room and play. All you have to do is cut a few zip ties behind the fairing. Hopefully this answers some questions for those on the fence about these bars. This was also my first bar install.
Troy Rubert
Reviewed in the United States on July 15, 2022
I am a tech guy not a mechanic so I was a little intimidated with doing this install myself, turns out if you follow the directions it is pretty straight forward. Installed my bars in between meetings while working from home. Followed a couple of videos on youtube, purchased Hill Country Customs Gorilla Grabber Handlebar Riser Top Clamp based on recommendations, throttle by wire was easy to pull thru with the directions and extra stuff sent from Dominators. I would recommend getting a Ignition Switch Housing Motorcycle Alignment Tool as the hardest thing i did all day was getting the ignition switch put back in. Bars look great, feel great and make the ride great.
Customer
Reviewed in the United States on May 20, 2022
Purchased the 14” prewired Dominator MeatHooks for my 2015 Street Glide. Shipping took about 2 1/2 weeks. I did not get the 100% & play, so the only wire I had to run was the throttle by wire, but thankfully Dominator included a pre-run metal pull wire so all I had to do was attach my throttle wire to the pre-run metal wire, apply some Vaseline, and was able to pull my throttle wire through in about 5 minutes.The caveat though is the connectors on the throttle by wire are too big to pass through the bars, so you are forced to “de-pin” the connectors, which wasn’t difficult after researching how. But I wish I had spent the extra $100 for the 100% plug and play version.Overall the wiring wasn’t half as bad as I expected, the bars look and feel great, and I’m happy they added the pull cable to make it easier. I did use 100% factory clutch and brake cables without extensions, I just followed a YT video by Factory 47 and they walked me through how to reroute those cables, which was pretty simple and I highly recommend.The entire job took me about 8 hours, going slow since it was the first time I ever tore my bike apart.
Vito
Reviewed in the United States on April 29, 2022
Great value and high quality bars. Definitely a morecomfortable ride and overall great look.Install was straight forward. I used Teflon tape around the throttle cable instead of spraying any type of lubricant down the bars. Made it very easy to guide the wires around the bend.
Jeff
Reviewed in the United States on September 8, 2020
Solid bars. Internal wiring is good. But when you need to install your throttle by wire its a pain. Had to remove right side internal wiring just to route the throttle by wire. And even then the angles at the hook point was ridiculous. They definitely should offer prewired with throttle by wire for the price. For it being an off brand company. Most bar companies are $400 for just the bars and even more for internal wiring. When it was all installed and I was ready to turn on the bike the headlight and tail light turned on but not the radio, the gauges, nor the fuel pump. Had to remove front face of fairing and unplug the wires turn on ignition then plug the wires back in to reset the system. Then of course I had alot of trouble codes. So I checked and cleared them via my installed tuner Vance and Hines FP3 tuner. After that it was good to go. The ergonomic grips take some getting use to. Definitely makes you sit up straight vs at a relaxed slouch. The paint quality is nice. And everything lined up as it should.
Recommended Products
$111.34
$ 54 .99 $54.99