Your cart is empty.
Your cart is empty.This exhaust extension compatible with Honda EU2200i, EU2000i, or EU1000i units allows for safe venting of exhaust fumes from an unoccupied enclosed area. The buyer will receive: A custom low profile exhaust to 1" ID tubing stub. The exhaust stub will need to be welded onto the generator's stock muffler. A mechanic/exhaust/muffler auto repair shop can typically perform the weld if you are not able. Illustrated instructions will be provided.
JT
Reviewed in the United States on July 31, 2024
You will have to go to a muffler shop that handles stainless and aluminum since they are the ones that TIG/heliarc weld. A top rated shop near me said they could not due this kind of welding and it was required due to the thin metal on the muffler. I found a shop that did two mufflers for $30 but I also had quotes of $180 due to a 2 hour minimum charge. The fitting had flash rust on it the day after welding so I would feel better if it was a true 304 series stainless piece (it is not). In the end I'm happy, but seller should be more transparent. Add a short piece of 1 inch ID silicone hose (typically turbo charger hose) to cover the stub end when you don't have the exhaust pipe connected. This will keep you from getting an instant burn bumping the hot exhaust pipe. Silicone turbo hose can be cut with heavy duty shear scissors or hack saw blade.
patrick mathe
Reviewed in the United States on September 12, 2022
Getting a one star because it does not attach, it has to be welded. Like who the hell has a welder!
TJ
Reviewed in the United States on November 13, 2021
I used a local muffler shop to weld this to my EU2200i. No issues with open exhaust so far. Having to do a lot of research to find a quality extension choice. Looks like many poor quality options for pipe / tubing.
Floyd Schmidt
Reviewed in the United States on April 21, 2021
Fit good !
S. Peterson
Reviewed in the United States on September 6, 2020
The reason for this purchase is to vent the exhaust directly out a sound baffle box I am building for my Honda Eu2200i. I have a friend with a metal shop who did the welding and he had no problem attaching this for me. As others have reported compared to the hole in the cover it is off-center. This is not the fault of this product but the way Honda designed the cover. No matter, though, as it does not come near the cover or cause any issues because of the offset design.It worked perfectly. I bought 1 inch SCEET ducting from Aircraft Spruce for $4.75 per foot and it fit perfectly. I attached the ducting with a hose clamp and ran the generator for 3 hours with no issues as SCEET ducting is a silicone made for high heat applications. The ducting popped right off with no issues. The 1" ducting was a perfect fit.My metal guy said this was nicely machined and good quality and that it would outlast the muffler. This was the most affordable solution I could find and I'm very happy with this modification.
Recommended Products
$77.50
$ 36 .99 $36.99
$84.99
$ 38 .99 $38.99