Your cart is empty.
Your cart is empty.Genuine Honda 91002-PS0-013 Ball Bearing, This is the official Genuine Honda Parts replacement part for your vehicle.
Tim
Reviewed in the United States on May 16, 2023
It came in an old, beat-up, dirty and torn package. Hopefully it works, it would be disappointing to tear apart the transmission for nothing.
Mehmet A.
Reviewed in the United States on February 19, 2020
I compared it with the OEM bearing in the transmission. The manufacturers’ name and bearing code were the same. The car is not humming anymore when I remove my foot from the gas. I recommend it for 04 civic ex manual.
B. Franke
Reviewed in the United States on January 28, 2020
This is the input shaft bearing for a 2001 Civic. This is the one you want to replace if you have transmission noise related to the clutch. It came in a Honda marked bag. Worked good for me.
Shawnathan Peterson
Reviewed in the United States on June 22, 2019
Very smooth spinning bearing, high quality, should fix my noise problem.
Scott faulconer
Reviewed in the United States on June 11, 2019
Worked great, problem solved
Arturo
Reviewed in the United States on November 4, 2019
Came in on time worded amazing would buy again
allen
Reviewed in the United States on January 4, 2019
Works like it should.
Customer
Reviewed in Canada on April 4, 2019
Great OEM part. Used on my 2005 Civic SI
Ryan James
Reviewed in the United States on August 22, 2017
My car was making a grumbling noise when the clutch was engaged that went away when I pushed in the clutch pedal.After replacing - Problem solved.PS. When you are done swapping out the bearing and it comes time to put the interlock guide bolt back in you will need to dry shift the transmission into second gear in order for it to go in (at least on my car 97 civic ex engine code d16y8). Also if you encounter any resistance when putting this bolt in stop because you don't have everything lined up. Also don't forget to replace the seal that goes under this bearing.
Recommended Products
