Your cart is empty.
Your cart is empty.The crash bar has been designed to provide extra side protection for the bike. Nowadays, the crash bar is also a very useful accessory for naked, custom and semi-finished motorcycles. If the motorcycle falls (e.g. from the kickstand), the crash bar can minimize damage.GIVI range of crash bars is specific for many motorcycle models. For custom motorcycles, the crash bar is offered chrome. The characteristics of the materials used offer excellent quality, guaranteed by many years of experience of GIVI.Check the availability of the crash bars in the section FOR YOUR MOTORCYCLE of your vehicle modelTube diameter 25 mm / We recommend that the assembly is carried out by a specialist mechanic
Lydsch
Reviewed in Germany on May 14, 2024
Hat super gepasst, wichtig die beiliegende Montageanleitung lesen da hier unterschiedlich lange Schrauben verwendet werden.Sehr Massive Ausführung und super Passform.
Larmarange Mathieu
Reviewed in France on September 23, 2023
The media could not be loaded.
Fernando LopezR
Reviewed in the United States on March 19, 2023
El Material esta bien solo que faltaron un par de piezas para el montaje
Oscar Javier Vasquez pavón
Reviewed in Spain on November 1, 2023
Todo ha llegado muy bien y puntual
flat3six
Reviewed in the United States on April 18, 2022
I found the install easy and straightforward after watching some install videos, the finish is of high quality and they fel sturdy. They met my expectations and exceeded them too.
Kevin Hansen
Reviewed in the United States on April 21, 2021
Fits very well. Very strong only wish there were previous for accessories. Like bags and running lights.
Vitaliy
Reviewed in the United States on August 7, 2020
I read mixed information online about whether these crash bars work with the rally raid bash plate.I can confirm that it works. Yes they bolt into the same frame mount, you'll just need buy two M10x1.25x40(or 50) bolts with a 14mm head from a hardware store and you'll be able to fit a deep socket w/ an extension down the tube on mounting point of these crash bars. You won't be able to reuse the 17mm bolt that came with the rally raid bash plate as the diameter of a 17mm socket is too large to fit into the tube part. Largest socket size that fits is a 15mm.
fabio
Reviewed in the United States on June 29, 2019
3 Missing bolts and both bars were scratched from factory.Instructions are really terrible.
Nicola
Reviewed in Italy on February 28, 2019
Ottimo prodotto
Peter
Reviewed in the United States on December 25, 2019
I get lots of comments on how these look. They really add to the appearance of the bike. And, after finding the icy patch on a ride a couple weekends ago, I can verify they’ll protect the bike from most damage at least in a low speed crash (I’m fine).Crashing ground a bit of metal off the guards on one side, but otherwise are undamaged. They probably paid for themselves already!Installation was a little tricky, but that’s par for the course. DON’T undo all the engine bolts at once. I have read that if the engine shifts with all the bolts out, it can be a real PIA for multiple people to get everything back in place. I fortunately had the intuition to do one side at a time, loose fitting things, which probably saved me some swearing.All told, these are a great addition to the bike and held up admirably in a low speed crash. I hope I will not get to update this review with a high-speed crash review!
Derek Zoolander
Reviewed in the United States on April 24, 2018
Good quality and good protection.Only 3 minor issues:1) It did require a little persuasion to install (I just used ratcheting straps around rear tire to hold is in line with the hole for the bolt to align without stripping).2) It came with some weird plastic sliders that were clearly designed for another bike, I think a Vstrom or versys maybe? I just didn't use them - didn't like the way they look anyway and the whole point of this is just to protect the actual bike anyway.3) The instructions are very unclear about which side is which, but it's pretty easy to figure out. When it come to left or right side bolts (different lengths), just measure them against the bolts you pull off the bike - the new ones should only be a few millimeters longer.All in all though, it's good quality and will definitely protect the bike. Doesn't appear to interfere with any periodic maintenance either.
Brian Robinson
Reviewed in the United Kingdom on August 14, 2017
Bit of a delay in delivery otherwise fine. Fitted to bike with little trouble. Well happy.
missjen
Reviewed in the United States on July 14, 2017
A little pain to get lined up perfectly when putting it on, but they do the job and look great while doing it. The girth makes the bike look slightly bigger, and now I have a place for a cup holder 👌
Recommended Products
$99.98
$ 38 .99 $38.99