Your cart is empty.
Your cart is empty.This Goldwood Sound 8 ohm 6.5 inch driver has a max wattage of 170 watts and is designed and engineered right here in the USA. This woofer features a 20oz magnet with rubber surround and poly mica cone. This woofer is a high end, pro audio transducer optimized for all musical instrument, DJ, car audio and professional applications.
Customer
Reviewed in the United States on March 3, 2025
Good sounding for a great price. I used these to replace the 6.5 woofers out of a Klipsch Promedia v.2-400. They have the same response frequencies as the original woofers, but can handle more power as they are 8ohm instead of the originals' 6ohm. Allegedly, you have to run the speakers for a 2 week brack in. I did not seem to need to as they sounded great out of the box. If you use these to replace your Klipsh speakers, please note: You will need to trim the black wire end to fit the connection. Renewed the life of a 25 year old 4.1 surround speaker set.
Joe Duque
Reviewed in the United States on March 21, 2025
Sound great
Customer
Reviewed in the United States on March 13, 2025
The speaker is not the same as the one it has listed for replacement!The terminals are not the same, the base is thicker, and it is NOT a subwoofer.
SAS
Reviewed in the United States on January 31, 2025
I have been very involved in sound for decades.I bought these to replace the woofers on my 30 year old Altec Lansing bookshelf speakers.These actually surpass my origionals.A great buy for the money!
hanc
Reviewed in the United States on January 29, 2025
in a word - WOW! simple 10 minute replacement and sounds amazing.
Salvador
Reviewed in Saudi Arabia on September 23, 2024
Very nicely packed..that is why I liked Amazon..thank you seller🤗
A.J.
Reviewed in the United States on June 7, 2024
This was bought to replace the subwoofer that came in my Klipsch THX computer sound system. The original speaker was paper with foam around the edges, and it just disintegrated into pieces but the regular speakers for the vocals are still great. I know that this is common on most cheap subwoofers, but I was expecting something a little better coming from Klipsch. The overall fit was excellent, and the screw holes lined up perfectly. The original speaker grill doesn't fit but if you remove the trim ring from the old subwoofer, you can get the grill to fit. The sound quality from this subwoofer is amazing and the materials the sub is made out of is by far superior to the original.
Cristian Moreno
Reviewed in Mexico on February 23, 2024
Bien
Customer
Reviewed in the United States on April 30, 2024
My subwoofer foam tore up so instead of paying 22 bucks for the foam and glue to replace it, I bought this instead. Super easy to install, and should take no more than 10 minutes. Just remove the grill with a flathead then unscrew the 4 screws on the speaker. You have to bend the terminals to a 45-degree angle so you'll need some pliers. The left lead fits perfectly but the right side is smaller so you'll need some pliers to widen it. I used 2 pliers, one to hold it while I used the other to pry it wider. I then slipped it onto the terminal as normal and it's a nice tight fit and won't budge. It screws into the same holes perfectly too.The woofer sounds really good. I think it's louder than the original Klipsch but as some others noted, you need to play music through it for a couple hours and it will sound better. On fast sharp sharp-hitting bass notes, it feels punchier but on the deep drawn-out bass hits, it's not as smooth and you can notice a slight rattle. Should be more durable than the Klipsch since the core is made of plastic and the "foam ring" is made of rubber.
Larry Tiefenbach
Reviewed in Canada on September 26, 2021
Replaced 20 year old speakers that had lived a good life.These speakers were easy to install and have great sound.
Benedict
Reviewed in the United Arab Emirates on July 23, 2021
Very good product which is what I expected. I had a Polk Audio RTI A3 in which the driver was blown. The local service center Sharaf DG in Times Square Mall simply said they cannot replace the driver from RTI A3. On a good google search thanks to Amazon.ae, I found out this driver GW-6028 from Goldwood which is 95% matching with the performance of the original driver which would have been also a OEM from any China make. This Goldwood GW-6028 fitted exactly into the circular slot provided in the wooden cabinet and it was easy to fix. Only suggestion to Goldwood would be "Why not you guys mark + / - terminals in your speaker". I had to buy a 9V battery to check the positive terminal. Its an additional expense for me. Can I sue Goldwood for that hahahaha. Otherwise, the performance is amazing and I am satisfied.
Robert S
Reviewed in Germany on July 8, 2020
Hat genau gepasst und die Anlage funktioniert wieder Super
B. Becker
Reviewed in the United States on October 20, 2020
The speaker has a flaw, if you will, in the center as shown in the photo. I hope this will not eventually affect the sound. For now it's fine and the sound quality is fair. The holes lined up perfect with the speaker case I was using. I think for the money it's not a bad deal. In the Q&A there was a question about negative and positive connections. The wires are both the same color but if you look closely, there is a + and - by the wire connectors. Hope this helps. I needed my 300 readers to see them. lol
Recommended Products
$169.99
$ 77 .99 $77.99
$104.95
$ 44 .99 $44.99