Your cart is empty.
Your cart is empty.The product that started it all. Original Gorilla Glue built a name for itself with its incredible, industrial holding power and versatility. The water activated polyurethane formula expands into materials to form an incredibly strong bond to virtually anything. Gorilla Glue is a 100% waterproof glue, safe for indoor and outdoor use and strong enough to stand up to the elements. Gorilla Glue’s your solution for almost any project or repair. Sand it, paint it, stain it. Simply stated, it’s the Toughest Glue on Planet Earth. Directions: 1.Prepare and Dampen the Surfaces: All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into. Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing. 2. Evenly Apply Gorilla Glue Onto the Dry Surface. Carefully apply onto the dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. 3. Clamp the Two Surfaces Together Tightly. Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape to achieve the appropriate clamping pressure. Clamp objects for 1–2 hours. For best results, allow 24 hours to cure. 4. Clean up: If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. 5. Storage Tips: After each use, wipe the bottle’s lid and nozzle clean with a dry cloth. While still squeezing, tightly replace the cap and then store in a cool, dry place. You should expect a year shelf life. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.
Dan
Reviewed in the United States on May 14, 2024
It’s very good. strong adhesion and reliable, worth the money.
J C A Ferreira Ianni
Reviewed in Brazil on March 27, 2024
Eu gostaria muito de classifica-lo com 5 estrela, mas infelizmente o meu celular não é daqui do Brasil e nem o sistema dele, por isso eu não estou conseguindo mandar a minha avaliação de satisfação. Eu nem sei se vou conseguir emitir essa msg para vocês.
Perez Andres
Reviewed in the United States on January 29, 2024
strong glue for almost ANYTHING
D.A.
Reviewed in the United States on December 9, 2023
Must be careful because this glue expands but it is by far the strongest glue I've ever used including any type of epoxy. Works on pretty much any surface!
Greg V
Reviewed in the United States on December 6, 2023
Just what I needed. Bond wood to medal for my woodworking project. Just don’t forget to use a little water like the instructions say.
Dr. A.
Reviewed in Saudi Arabia on June 25, 2022
The glue in the bottle is dry and not viscus?!
Dee
Reviewed in the United Kingdom on March 17, 2022
I am so impressed with this product and am wondering why it’s taking me so long to find it.It definitely bonds to practically anythingIt’s true what other reviews say that you only need a very small amount and to be careful as it expands so , with that in mind, it’s best to use small blobs that are spaced apart and away from the edges and also to bind the fixing with something temporary for a short while to ensure complete bonding
BigIan
Reviewed in the United Arab Emirates on January 28, 2022
Good quality from a reputable company
MB in Calif
Reviewed in the United States on November 29, 2021
An excellent adhesive, but with some warnings:1. It’s a water-activated polyurethane. Water starts the curing process, and instructions say to wet one of the two objects to be glued. Well and good, but air usually has water vapor in it … more in a humid environment. When you remove glue from the container, it’s replaced with air that usually contains water vapor. This will start a slow process of curing the remaining glue. In weeks or months, the remaining glue gets thicker then solid. I get one or two uses out of a container before it goes bad (thickens too much). Lesson is that containers should be considered single or double use. Don’t buy large containers unless they will be used completely soon after opening.2. Because of water vapor in the air, glue that seeps from the joints will cure rapidly and form a stiff foam. This must be cut away with a utility or Xacto knife if the joint seam is accessible … if not accessible, too bad.3. Glued items need to be clamped together after glue is applied for best performance.4. Let cure for at least 24 hours.5. Cured glue has limited flexibility. I’ve used it for shoe heels and stiff soles. Anything more flexible, expect it to crumble and fail with repeated flexing.
Alex M
Reviewed in the United States on July 26, 2020
Used to repair some patio chairs where the fabric started to fail. Glue applied and bounded and covered by clear packing tape until set. Then cushions hide the pretty ugly joints but function and strength are well tested and a cheaper alternative than replacing fabric or the chairs themselves.Also used to repair shoe insoles that won't stay put.Careful not to get this on yourself or in unwanted places. I don't thing there are any solvents that work to clean up.
CranberryHarry
Reviewed in the United States on June 4, 2020
Not much to say. Follow the directions. Dampen one side of object being glued. I have used this product for almost 5 years. It is very strong. Important to clamp a bit while drying. It has lasted quite a long time. Possibly 'slip and score' surfaces a bit. Or just have some pressure. Works almost as good or better then JB-weld.It is a heavy duty glue. Kinda tricky getting used to it. Start with small amounts. It goes a long way. It is a strong, industrial strength glue. Good product and good price. Very handy for a lot of different projects.
カスタマー
Reviewed in Japan on August 14, 2018
文句なしの接着力。強力過ぎて国内では取り扱い中止でしょうか？
Capn Ron
Reviewed in the United States on June 26, 2018
This is my “go to” glue for around the house repairs. If something breaks or comes apart, my wife tells me, “you better Gorilla Glue it” whether or not it would be applicable. The first time using this product, I followed the directions exactly, slightly curious as to why I would want to wet/moisten what I was gluing. I as a little alarmed with the foaming action and kept a good eye on it, wiping it down occasionally as it set. The item I repaired, a wooden cutting board, looks great after some light sanding to remove the residual residue and still holds up today, 3 years later. You can’t even see where the repair was made. I have since used this on a number of repairs with great success. I can’t do without this stuff in my tool box.1) Follow the instructions and you will have greater success.2) Use the least amount to make the repair. It does tend to foam a bit and can be a little messy if you don’t keep an eye on it.3) The smaller bottles are the smartest way to go. After opening, it does seem to thicken in the bottle with time. I got approximately 2 years out of my old bottle before discarding it with about 1/4 of the bottle remaining.
Recommended Products
$92.00
$ 38 .99 $38.99