Your cart is empty.
Your cart is empty.
Featuring precision 16:1 ratio, sealed lubrication, cast housings and removable metal knobs, these are some of the finest tuners available.
The large metal Schaller-style knob is the same as found on many modern guitars. 10mm (13/32")-diameter pegholes required. Sets include mounting screws and threaded hex bushings.
Installation Tips
Mounting screws: Pilot holes required. Installing delicate screws into hard wood requires great care and accuracy. We highly recommend a No.50 bit for the pilot hole before installing these screws. Lubricate the screw threads with cutting lubricant (also wax or a bar of soap) to reduce friction and help them thread properly.
ghudson58
Reviewed in the United States on March 12, 2025
I purchased these tuning machines to replace the lower quality machines that came with a new travel guitar I recently purchased. Typical of Gotoh, they work extremely well, both mechanically smooth and keeping the guitar in tune. nPlus, they also look great. In particular, the guitar I upgraded with these wonderful tuning machines is an Orangewood Morgan Live Natural Burst. They are a perfect drop in replacement. There is nothing to do but remove the old ones and install the new ones with nothing but a nut driver or small adjustable wrench and a small Philips screwdriver. Everything aligns and fits perfectly.
Jon M. Stark
Reviewed in the United States on February 20, 2025
My daughter broke a tuner off my old acoustic beater guitar so I was looking for a replacement that had the same mounting specs (didn't want to fill/drill holes) and this one matched the specs.To my pleasant surprise, these were very nice ... so much smoother and better made than the guitar's originals. Excellent upgrade.
Loose Nut Ford Racing Team
Reviewed in the United States on December 8, 2024
Have always had Grover on my high end acoustics but learned they are not made in the USA any longer and are getting very bad ratings now. These look good, feel good, operate very smooth. Just the right tension after adjustment upon installation. Fits both Fender Custom & Martin custom perfectly.
lepercan
Reviewed in the United States on December 1, 2024
Very nice tuners, extremely smooth and a pleasure to look at.
JD_90065
Reviewed in the United States on August 8, 2023
It can be unsettling and frustrating to order tuning machines that should fit one's guitar without any drilling. I'm writing this review for anyone who wants to replace the mediocre tuners on their Ibanez Artcore hollow body guitar. These tuners fit perfectly, no drilling required. The screws on the back are a bit meatier (which is good), so you'll need to use a bit more torque when first installing them. The knobs on these tuners have a square-ish as opposed to the bean-shaped original tuners, and they seem to sit slightly closer to the headstock, but this doesn't interfere with access or operation.Lastly, these tuners are 14:1, which is plenty precise for me, and they are far superior to the stock tuners that came with the guitar.
Scott A Fishkind
Reviewed in the United States on August 23, 2023
I have four acoustic guitars including a Furch Yellow Master’s Choice Gc-CR.The Furch has Gotoh 510 tuning machines which are absolutely incredible! It made me realize how relatively insufficient the tuners on my other guitars were!While these are not exactly the level of the 510s, being 16:1 instead of 21:1 ratio, they are really outstanding, smooth, and very high quality!I have since replaced all of the tuners on my other three acoustics with them. The only difference among them are different colors that suited each specific guitar.All of my guitars feel like they’ve been elevated to another level and it really is quite a different experience tuning my instruments. It is so much easier to dial them in now!Additionally, these are extremely easy to install, and only took a few minutes because they were a perfect fit. I just purchased the proper number one Phillips head screwdriver and a 10 mm socket wrench, considering I didn’t have to pay a luthier or guitar repairman, it was a very minimal additional cost!Highly recommended!!
Customer
Reviewed in the United States on May 16, 2023
Perfect, used on a Fender CJ290-SCE
JR Weymouth
Reviewed in the United States on June 14, 2022
These are a perfect fit for my Ovation Celebrity Elite. I was worried because nowhere on the internet did I find anything telling me what tuning machines would fit. These looked like they would and the specs matched as far as I could tell (I'm not a machinist) so I took a leap of faith.So far I have only replaced the factory Ovation machine that was broken, but it fit flawlessly, no modification needed, and is smoother than the factory machines. Brighter gold too and I like that. I'll be replacing the other 5 soon.
Recommended Products
$12.99
$ 6 .99 $6.99