Your cart is empty.
Your cart is empty.Product Description
5 pin cable
It's a 5pin cable,used for 5pin joystick.Connection as the picture shows.
Red & Black Cables
The red & black cables are used to connect to push buttons of 2.8mm terminal.Before you buy it,please confirm the size of your buttons.
White & Blue Cables
Be used to connect 4.8mm terminal micro switch.Such as connect the microswitch on the HAPP button,Happ type joystick and 2pin joystick.
USB Encoder
100% Zero Delay Pc Encoder!
It is also a compact encoder. The size for the encoder board just 8.5cm*3.5cm*1cm.
It also can support most Arcade Emulations, Such as MAME, JAMMA & other PC gaming console emulation.
Attention: This is not LED Encoder Board, CAN'T support LED Joysticks and LED Push Buttons! (If you insist use this encoder for LED Parts you need add power source for LED lamps)
IRgEEK
Reviewed in the United States on March 8, 2024
Everything you need down to the USB cable in this kit so you can quickly do a 1 player setup with buttons and a joystick which you need to get separately.Very handy kits to have in your spares collection.
Chris
Reviewed in Canada on March 16, 2024
Tried using 2 on a 2 player cabinet with recalbox on a raspberry pie.Sadly it wouldn’t work for 2 player, could only get it to work with 1 set of controls.
Joe McLean
Reviewed in the United States on May 18, 2023
Using this to retro fit a classic arcade cabinet. Gutted the CRT chassis and power supply. Running retro pie and a 24 inch modern monitor, mini USB powered amplifier to factory speaker and you're done. Hook the OEM joy stick and buttons and coin drop switch to this encoder...good to go.
Ryan C.
Reviewed in the United States on March 12, 2022
I purchased this board for an old American style fighting game stick used for MvC2 and Street Fighter games played on Fightcade. The cables and board were super easy to install, but I immediately noticed significant input lag using the stick for a couple days. Lots of dropped inputs and misses on moves/specials etc. Researching some more and found a breakdown of controller lag (https://inputlag.science/controller/results) with this board scoring poorly. If you're a major fighting game player or can't take delay, I'd recommend getting one of the Brook boards. I replaced the "zero delay' board with Brook's Zero Pi Easy board (https://www.amazon.com/gp/product/B09637ZPSF/) and it's light years better for only ~$15 more in price. I'd personally recommend getting that board instead of this.
maxime lefebvre
Reviewed in Canada on April 12, 2022
Ça fonctionne comme prévu, livraison rapide & installation facile.Très satisfait !
Captain KS
Reviewed in the United States on October 26, 2021
I’m only using it for a USB button box interface for my simulator game but, for that purpose, it works great!
J.P.
Reviewed in the United States on September 27, 2020
Works great and easy to install. Put them in my arcade cabinet. Very happy with this product.
Wrangle
Reviewed in the United States on July 15, 2020
I used these encoders to mod an Arcade1Up cabinet (SFII). This package seemed like a bargain, considering it came with all of the cables one would need to wire up Sanwa sticks and the Happ buttons I opted for, at nearly the same price of an encoder alone. While the cables seemed a bit short for the buttons near the edges of the control panel, I was able to make it work without needing additional cables, and I have been pleased with the performance of the kit for several months since the install. I would highly recommend this kit to anyone looking to mod a cabinet, and will go this route if I pick up another cabinet in the future.
logan
Reviewed in the United States on October 7, 2020
built a hit box to play tekken 7 on pc plug in the buttons till i found the correct imputs and it work with no software or modding to the game
Brent G.
Reviewed in the United States on November 16, 2019
This worked exactly as expected... which is pretty amazing given the price. I was expecting it to be iffy, but its a great kit for building a controller or arcade stick (or even custom input device) for PC, an emulator cabinet etc.
Recommended Products
$271.49
$ 99 .00 $99.00