Your cart is empty.
Your cart is empty. Specification:
Item Type: Power Automatic Transfer Switch
Material: PC, Silver
Model: NLQ3 125 2P
Rated Current le: 100A
Insulation Voltage Ui: AC690V
Rated Voltage Ue: AC110V
Frequency: 50/60Hz
Rated Control Voltage US: 110VAC 85% Us to 110% Us
Grade: PC Grade
Specification: 2P
Service Life: Electrical: 2000 Times, Mechanical: 5000 Times
Rated Short Circuit Current: 50kA
: RT16 00 63A
Rated Impulse Withstand Voltage: 8kV
Auxiliary Circuit: Two Relays, Each With Two Sets Capacity: AC110V 50HZ le=5y
Touch Time: Conversion Time: Return Time: Closing Time:
How to Use:
1. Before installation, please check the integrity of the ATS, use the operating handle to turn it on or off, check the flexibility of the device, and detect the generation and disconnection conditions of normal and backup power loads at each stage.2. Wiring and use according to wiring diagram.
packing list:
1 x Power Automatic Transfer Switch
Note:
1. The maximum ambient temperature shall not exceed 40℃, the minimum temperature shall not be less than ‑5℃, and the average temperature within 24 hours shall not exceed 35℃.
2. The altitude of the installation site should not exceed 2000m.
3. When the maximum temperature reaches 40℃, the relative humidity of the installation site should not exceed 50%. When the temperature is at the lowest temperature of ‑5℃ and the relative humidity is high, for example, at a temperature of 25℃, the relative humidity is 90%. Due to temperature changes, special measures should be taken to deal with occasional condensation on the of the product.