Shopping Cart

Your cart is empty.

Your cart is empty.

Himalayan Dog Chew Bonehead, Small Dog Chew Holder, Secures Yak Chews and Bully Sticks, Durable Nylon Dog Treat Holder, Safe Chew Toy for Puppies and Small Dogs, Safe Chewing Accessory, 1 Dog Toy

Free shipping on orders over $29.99

$6.95

$ 3 .99 $3.99

In Stock
  • A DOG TOY THAT HOLDS CHEWS. Keeps chews stable and easily accessible for your dog’s chewing enjoyment
  • STIMULATES YOUR DOG Your dog gets extra stimulation from the nubs and interesting shape dynamic.
  • SAFER Keeps chew nuggets from getting gulped.
  • DISHWASHER SAFE Clean your Bonehead with ease on the topshelf of your dishwasher
  • ENGINEERED specifically to work with Himalayan Dog Chews, but holds lots of other chews too -


The Original Himalayan Dog Chew is a very long lasting dog chew. Himalayan Dog Chews are made by boiling yak and cow milk and then dried for several weeks to create a hard chew. Dogs must work the end of the treat for hours, softening it with their mouths before small parts of it can be slowly scraped off. It is 100-percent natural with no preservatives. It is an authentic type of cheese eaten by the people of the Himalayas. When you give this Himalayan Dog Chew to your dog, you know that you are providing them with hours of high quality eating entertainment. Packaged by weight, quantities and size vary.


Lauren Starling
Reviewed in Australia on February 11, 2025
I get stressed out giving my Frenchie certain chews. This takes that stress out. Recommend!
PeekABoo
Reviewed in the United Kingdom on January 8, 2025
This holder is great! We have a 7 month old puppy who hasn't quite learned how to hold her chews between her paws. So we got this to help her learn.I noticed that there's a review where they gave this holder to a puppy and the pup just chew right through it! - It's a pup, they need to LEARN that the holder isn't a chew! So after a few days of keeping our eye on our puppy and teaching her that the holder ISN'T for chewing, she is now used to this and chews the yak bar only.The grip is good, it holds a medium yak bar well.Also, I noticed a reviewer put this plastic holder in to the microwave - I do not know why they did such a silly thing - it's plastic, it WILL melt! No where on the instructions does it say to put it in the microwave - it's ONLY the Yak bar that goes in to the microwave, after soaking it for 10mins.If your dog/pup is having trouble holding the chew, or theres only a little bit left of the chew and you are worried your dog/pup may try to swallow it - get this! But make sure you teach your dog/pup the holder isn't a toy for chewing!And Never, Ever put the holder in to a Microwave.
Customer
Reviewed in the United States on January 1, 2025
I’ve tried a few different holders and this one is the best so far. I have a 20lb frenchie who loves her yak sticks. This holds them tight and is the perfect size for her and just right for the medium sized sticks. My only complaint is the screw that secures the stick. The screw broke after about 9 months of use. But maybe my expectations should’ve been lower since the screw is made of plastic. The 4 little triangle sections of the screw head broke off over time one by one and eventually there was nothing left for the screwdriver to grab onto. I wish they sold just replacement screws for these, that’s all I really need.
M.A
Reviewed in Italy on May 2, 2024
Il supporto è eccellente . Fissa benissimo sia latte di jak sia bully stick ( io ho preso misura s e ho provato con latte di jak misura m e nerbo di bue ( bully stick ) vanno benissimo entrambi ) e qualsiasi altra cosa che c’entra rispetto alle dimensioni del supporto ci potete mettere di tutto . Serve un cacciavite grande e piatto per avvitare e svitare la vite . Sulla vite ho qualche dubbio sulla durata perché è plastica ma niente di grave basta prenderne una uguale da un qualsiasi ferramenta magari non di plastica e per il resto vi durerà in eterno per fortuna perché non è certo economico . Ma vale la pena se la vite la potete sostituire .Molto molto comodo sia per il cane sia per l sicurezza del cane sia per lo sporco in Casa perché il bastoncino fissandolo alla base e non al centro impedirà al cane di girarlo di continuo e morderlo da entrambi i lati .impedirà anche al cane di soffocare non potendo mangiare l ultimo pezzettino .Consiglio al cento per cento il vostro cane si diverte mangia in sicurezza e voi state tranquilli . ( lo consiglio misura s per i cani di piccole e medie dimensioni non troppo aggressivi con le loro masticazioni anche se se avvitate bene il supporto è molto forte regge benissimo a strappi medio forti ) . Se il vostro cane mangia le masticazioni e non la plastica compratelo e ve ne troverete contenti
nikki
Reviewed in the United States on May 18, 2024
I have a frenchie who tries to swallow his chews, so I got these to prevent that issue. So far it works great to hold Yak chews. I was also hoping to use these for bully sticks, but the screw does not go all the way to the other side, so it does not work for most bully sticks (which seem to be getting thinner every year). If you can find super thick bully sticks, it will probably work. I will say make sure not to turn the screw too tight because the head of the screw is plastic, and i can see this breaking over time if your not careful. It also helps hold the chew better in his paws, and my corgi also seems to prefer her chews in these because its hard for her to hold them on her own with her short little legs.
👻✨
Reviewed in the United States on April 27, 2024
I bought two of these along with some small himalayan chew bones to try. It just barely held the chews securely- had to position them just right for it to work, but I ended up deciding the yak chews were dangerous for my dogs' teeth. And even with this holder I felt I needed to watch like a hawk to be sure the pups weren't pulling the chew out or breaking their teeth- those yak chews are scary and I read a few too many reviews (after buying 🙄) that spoke of broken molars and vet bills.So I gave up on yak chews, and tried the holder with bully sticks and other hard chews, but the screw either breaks the chew, or doesn't hold them securely, so the dogs just pull them out. One little rawhide thing actually held well with the screw down as far as it would go until the dog pulled so hard that the screw got sucked deep into the hole and the slots for the screwdriver collapsed so now the whole thing is garbage. I tried a big braided bully stick and the screw broke the braid and turned it into 3 small bully sticks that my dogs will try to swallow for sure. I'm so done trying.The only good use for this would be for a verrry chewy dental chew that is wide enough to hold tightly, squishy enough not to split. Just to slow your dog down so they don't eat whatever it is whole. Imo yak chews are terrifying and this thing isn't worth the trouble. There has to be a better option out there somewhere!
Sandy Fika
Reviewed in Canada on July 1, 2023
This keeps the dogs from swallowing big chunks of chews. It is a definite relief to not have to hover over him!! It does sit like a spike so I'd use care around kids, but it is a great product.
Abominable Snowman
Reviewed in Canada on May 20, 2023
We got this for our Pomeranian. It’s actually a little big/heavy for him even though it’s the small size. I have a bit of difficult securing his whimzees inside but for the most part works well. I used a flat head screw driver at first but I switched to the back of a fork and that works better. I still supervise closely always when he has a bone but it does bring a bit of peace of mind!
Carol Gronewold
Reviewed in the United States on September 8, 2022
These small sized Boneheads are terrific! I'd like to pass on some tips I have learned to make them extra secure for the dogs in your life. I use the Pawstruck 7" Bully Sticks with these. The solid sticks, not the braided ones. In order to make them very secure in the Bonehead I take a small serrated knife and cut in a narrow, but not deep line on both the top and bottom of the stick about 1 1/2" from the end or a little less. Those cuts allow the screw and the 3 knobby tips opposite the screw to securely "seat" into the bully stick without being pulled out. Tighten down the screw making sure to catch both of those cuts. Works perfectly! Another tip is when I first got these and put bully sticks in them my two dogs were not interested in chewing on their "favorite" sticks and would leave them lay on the floor. So - I placed the Bonehead devices into the bag with bully sticks for a couple days to smell like the sticks instead of plastic. Worked perfectly! My dogs love to hold onto the Bonehead to prop up the stick for easier chewing. So great! And - bonus - their teeth look fantastic and I no longer worry about them swallowing that last 3" of the stick. I do keep a close eye on them though. I no longer watch them like a hawk but I watch them with a smile. I highly recommend these!Update: I have found a perfect method to securely hold the bully sticks in place! About an inch from the end I use a countersink drill bit creating a perfectly round hold for the screw to fit into. (Do not go all the way through the stick though, just create a shallow hole.) Directly underneath the hole I use a small diameter rough rasp and can easily create a trough for the knobby area to fit into. Works great!!!
Chris B.
Reviewed in the United States on September 15, 2022
I’ve seen too many people having bad experiences with this product because of how the lockdown screw is. It looks like a Phillips head bit which looks like a +, but you should ONLY BE USING A LARGE FLATHEAD - screwdriver. They really need to fix this design and just make it a singular slot instead of a cross or just make it a bolt type head that you can use a wrench to tighten.I bought two of these to send to my mother and she couldn’t get it to secure a chew properly. When I visited her, I showed her how to tighten it down but it’s obvious why people keep making the mistake since the majority of people don’t seem to know how to use screwdrivers and the right sizes correctly in the first place, I know this because I work with tools and train people all the time.Using the small size Bonehead, you can secure almost any size chew for large or small dogs. It seems to be a pretty durable holder but you can easily destroy the screwdriver slot if you use the wrong type and size tool. Remember, LARGE FLATHEAD!
-
Reviewed in the United States on August 21, 2022
This is a good tool for yak chews and totally works. But, the screw is soft plastic and even with my widest flat head screwdriver bit, the head of the screw wants to warp. I would recommend the company sending a purpose made key that fits the cross perfectly so that the screw can remain un-mashed. As it is, I'm scared that I won't be able to tighten it enough to use as intended.