Your cart is empty.
Your cart is empty. Note:The color of the item may vary slightly due to photography and your own computer /Phone
Please allow some little manual measurement error.
Customer Satisfaction Guarantee
If you are not completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!
Note:Check your specific model's manual for compatibility,or Contact us.
Paul
Reviewed in Canada on June 30, 2024
Parts are missing.I am very disappointed
Ken Myers
Reviewed in the United States on February 12, 2024
Product seems to be well made.
Joshua M.
Reviewed in the United States on January 13, 2024
I’m not an RC car guru, so take this with a grain of salt. I’m not impressed with these components. The supplied washers do not properly shim the axle. One washer is not enough, two is to much. I used two 5x8x0.5mm PTFE coated washers (not included) and they worked out well. But the thing I can’t fix is the slop in the pivot pin between the caster block and the steering block. The bore in the steering block is way to big, and the lugs are too far apart on the caster block. I tried to find something to shim the lugs, but I can’t find anything on hand. So now I’m got tons of slop in my front suspension. Would it have cost any more money to manufacture these with the correct bore diameter? Lesson: If you can’t afford the quality upgrades, stay with stock, as its far better.
The Family Roland
Reviewed in the United States on April 27, 2024
Worked great on my Traxxas Big Foot
REX
Reviewed in the United States on April 15, 2024
This kit will tighter up your 2wd front end like the business. The parts are nicely machined and anodized. They fit very well, and all threads are nicely cut. These parts will fix your front end and make your adjustments way more tight. It makes the suspension and steering feel more precise with a lot less slip than stock. Also, a weak pint in the front end is the front caster blocks. They take a lot of pressure and can break very easily. Make sure you get this kit when you break one front end part. It will make your ride feel like it cost double the price.
Rybegooch
Reviewed in the United States on October 13, 2023
My 2WD Stampede must be 14 years old, and these parts fit perfectly. The included hardware won't be everything you need, you'll have to reuse some of the original screws and bolts. Also, make sure you use Loctite blue or the included hardware may back out over time. I'm very happy with how easy the install was.
RowdyRustlingPiper7
Reviewed in the United States on July 1, 2022
the rod that connects the castor block to the steering knuckle is arguably the most important piece of hardware, along with the tiny e-clips that secure it in place. this set is very nice, and theres a couple extra pieces here and there, mainly the small nuts and washers, but nowhere in this set is the connecting rod, or at the very least a couple e-clips to replace the ones that were lost in the crash that broke my cheap stock castor block and bent the connecting rod. i can straighten steel, i cannot materialize it.*Update: 10 minutes later i've decided to just put the car back together as best i can until i get some hardware, until i noticed something that just ruined the value of this set entirely. if you want this set as a replacement, you will need connecting rods for the castor block and steering knuckle, and you will also need allen bits or allen keys that are very small, and very specific. now i not only need to get some e-clips, i need to get *another* tool kit just for my castor blocks. i tried using the stock hardware but the threads dont fit. i'll know better next time to just find a complete set that's either using phillips or torx.
Matthew A
Reviewed in the United States on September 6, 2021
These work great if you wanna put hex tires on the front of your Traxxas Jato 3.3. All you have to do is drill out the bottom pin to accommadate for the bigger pin that slides through the A arm. Also added a shim to remove any extra play. Would buy again!
Brandon
Reviewed in the United States on June 7, 2021
Very good upgrade for the nitro slash. Nice fit and not too much wiggle. Very nicely made!
Recommended Products
$20.99
$ 9 .99 $9.99