Your cart is empty.
Your cart is empty.Bobby
Reviewed in the United States on March 1, 2025
Good and tight, fits perfect. Warmed grip in pot of water, used the handles of two butter knives to gentle stretch the grip. Used the package to make thumbnails to help slide grip past the roughness of the pistols grip, windex was used as a lubricant and with a little effort the grip went right on. Fits my hand perfect
Hagiya
Reviewed in the United States on January 1, 2025
Title. Dagger was giving me slide bite, but this fixed it completely. I do have big hands so the added width helped too!
Gunner
Reviewed in the United States on September 25, 2024
This grip is perfect, I was a little leary because of the finger slots on the Gen 3, but the grip has slots to fit over them and actually locks the grip in place.The installation was simple, I don't know why others had so much trouble, I just put it in hot water for a few minutes and wiggled it right on.This is the second one I've purchased and love the way they feel. I have bigger hands so it feels so much better than the stock grip.
C.N.
Reviewed in the United States on May 4, 2024
Absolute pain to install, but pretty worth it in the end. Great feel, grip, and size that doesn't cover the mag release unlike other grips.
Andy
Reviewed in the United States on January 12, 2024
The Hogue Glock 19 handall beavertail grip sleeve fits and feels great. I almost didn't order based on some of the so-so reviews regarding difficulty of installation and tearing; however, after reviewing the installation procedures, from Hogue, on-line, it was a no brainer. The installation was easy and took less than 5 minutes from start to finish, which included waiting for water to boil. I really like the feel and fit of the 19 in my hand with the added grip. Great product, great purchase, great results. Highly recommended.
M
Reviewed in the United States on April 9, 2024
Works great and I have hands so big I legally need to have them registered as satellites.Joking aside, works great on the G21 Generation 3 non- S.F. model. So this fits on the biggest fattest model and I find that comfortable. Let that sink in on how big my hands are.It is a very tight fit, so be sure to use hot water. Someone here listed a method that I followed to get it on and it's great advice. Be patient when doing this. Mine never tore or cracked. Great stuff.
Aim
Reviewed in Japan on March 3, 2022
さわり心地がとてもよく、また太過ぎず手が小さくても持ちやすいので気に入りました。裂けたとか書かれていますが、海外レビューに書かれている方法を実践したら普通に付きました。まず2,3分湯煎し、そのあと説明書どおりパッケージをカットして靴べら的なものを作ります。(1個でいい)作った靴べら的なものをグリップ前縁に当てて、内側にシリコンスプレーを吹いてからラバーグリップのビーバーテイル側を先に入れておき、靴べらを使ってラバーグリップの口をグリップに入れます。(このとき力が掛かるので、靴べら的なものの端が尖りすぎてると裂ける?)あとは熱いうちにグイグイ上に上げていけば普通に付きます。英語レビューに失敗例も成功例も載っているので、届く前に読んでおくと良いと思います。
T. Jones
Reviewed in the United States on November 18, 2022
The Hogue Handall Grip is hard to install but worth the effort. If you have extra large hands, this grip will make holding your Glock 19 more comfortable and more natural. Also, it makes the finger groves on my Glock 19 Gen 3 make sense. After getting my Glock 19 Gen 3, I understood why many reviewers had disparaged the finger grooves. Without the Hogue Handall Grip, the finger grooves felt vaguely helpful and mildly uncomfortable, but the grip enhances the grooves, helping me to get a more secure grip on the pistol. Yes, as other reviews mention, the grip is tough to get on, no matter the technique used. I tried all of them, from using hot water, using cut pieces of the plastic packaging, using a hair dryer, using 99-cent store Windex, and using a spoon. In the end, what worked for me was softening the grip in boiling water, placing the handle end of a spoon inside the groove side of the grip, and getting the back strap side on enough that I could use the spoon to stretch the groove end past the magwell opening, then spraying Faux Windex on the spoon and rubber grip which made it easier to slide the grip down the spoon handle past the finger groves, then spraying Faux Windex on the back strap side and sliding that side in place. I had previously tried all the other techniques while putting a Handall Grip on my Glock 26. After an hour of failure, I got the above process to work. My Glock 19 install took 15mins, including the 10mins to microwave the water.
のお客様
Reviewed in Japan on August 17, 2021
取りつけで裂けた耐久性ゴミだった
Hard Castle
Reviewed in Canada on June 19, 2021
Fit my glock perfectly thanks
imad el haddad
Reviewed in Canada on May 5, 2021
Nice grip
J. Cordell
Reviewed in the United States on October 6, 2020
Yes it takes a little effort to get onto the pistol, but it isn't that hard. I soaked the sleeve in hot water for a couple minutes then sprayed down the inside of the sleeve with Windex. After that I got the back portion on the grip first and then worked the front side onto the frame. It isn't hard at all. At one point it got a little tough, but a couple squirts of Windex and that was it. Don't muscle the sleeve onto the pistol and don't go crazy with some type of lever. I have read reviews in which folks mention tearing the sleeve. Yes because they don't take any time to finesse it. Take your time and work it on. The hardest part is getting it onto the front portion of the pistol grip, but once you've done that it's just a matter of slowly pushing it upwards. Once it is on your pistol it will quickly form and become rock solid. I like the firm grip and the palm swell increases the comfort.UPDATE: 11/02/2020Shooting with this sleeve is an excellent experience. Recoil with a 9mm isn't really a big deal, but the sleeve ensures that I have a very solid grip. I didn't find myself having to readjust my grip once and no slippage whatsoever. As a result I've upped my score to five stars.
Recommended Products