Your cart is empty.
Your cart is empty.Product Description
2-in-1 Ergonomic Monitor and Laptop Stand for Desk
This monitor mount can support either one monitor or laptop. You can do a simple DIY, switch between whatever mode you want.
Cable Management
We've matched 3 cable clips to help you manage cables on your desktop so you can have a nice, clean desktop and never feel fidgety about the messy cables on your desktop again.
Two Installation Methods
Clamp type: requires a desk with a standard thickness of 0.6"-3.9"，The C-clamp is secured by simple hand tightening and is mountable to any desk.
Grommet type: Holes must be provided on the table. If no holes are available, self-drilling may be required. Holes shall be 0.4 "-2" in diameter and 2.9 table-thickness can be supported.
Fast Cooling Tray
The vented tray supports notebooks up to 15.6 inches in screen size with a total load capacity of 22 lbs. High-quality steel material ensures durability and elegant looks.
A B
Reviewed in Canada on July 9, 2024
Screws constantly come loose. Otherwise amazing product.
Mark Webber
Reviewed in the United States on June 29, 2024
This stand took about 10 minutes to assemble then another few minutes to get the height and laptop tray angle adjusted to my liking. The stand is strong and sturdy. It's not going anywhere! The tray is at a slight angle, but that's not a concern to me as I'm using four external monitors and don't use the laptop screen much. However, getting your laptop off the desktop gives you so much extra room that it's almost like getting a larger desk.
Stanislav Ivasyuk
Reviewed in the United States on May 24, 2024
I had to customize it myself to attach it to my work table's frame. Customizable (especially with a Dremel, drill, hammer, and a pair of 4-inch M6 bolts), good operational flexibility. Especially considering the price, perfectly fits my needs. Now I can operate my third (old testbed) laptop way more easily. I certainly recommend this product.
Agnysse
Reviewed in the United States on January 24, 2023
Very easy to use for moving laptop upward and away from desk. Ease of movement and keeping the cables away from desk. Only small issue is the plate where the laptop is sitting on. It shakes a bit when typing or pressing the 'On' button to start the laptop. Other than that ... everything works very well. You can adjust the laptop screen away from you if you're watching a video on a 17" screen. You can adjust to the level where your wrist feels comfortable at a certain height. Good product!!
Zhiyuan Tong
Reviewed in Canada on March 2, 2022
robost
Derek M.
Reviewed in the United States on February 24, 2022
I got this since my new job sent me a laptop and I can't use my desktop or a virtual desktop. With an arrange of a few splitters and ports I was able to basically get my laptop working side by side my desktop.It was easy to put together, assembly was pretty quick, and I was up in no time. I love that it has a lip to make sure that the device doesn't slide off and it allows a good range of pivoting and movement and is easy to tighten down. If you're looking for a pretty inexpensive but strong mount for the home office, this works great.
techjunkie
Reviewed in Canada on January 22, 2022
Not being able to torc tighten all the hinge joints, does make it hard to keep the shelf from sliding and slipping from any slanted position. So have to keep it in a upright position all the time to prevent it. Also tray is loose and rattles when attached but have added soft spacer to fix and all good.
Richard
Reviewed in Canada on July 12, 2021
Très bon produit, très solide, très pratique. Merci
Nikko
Reviewed in the United States on May 16, 2021
I saw a bunch of negative reviews, but I still decided to take a chance on this product. I can't speak for the negative reviews. All I know is that their experience was different from mine.I usually don't write reviews unless I really like a product or its value. I wrote this review, and for some reason, the page reset after I finished it, and I STILL rewrote the review, because I love this product so much!First, if you own a MacBook Air or Surface Pro, maybe this isn't the laptop stand for you. I own a Dell i7577-7425BLK-PUS and it's a heavy laptop. The stand is 13 7/8" wide and 11 3/4" deep. Even though my laptop sticks out 3/4" on both sides of the stand, to me it fits perfectly. It's NOT a flimsy stand. It's well constructed and the same quality as my $100+ dual monitor stand, at over $60 less money! The lip of the stand, which keeps it from sliding off, doesn't have any foam, but I just added a small strip of high-density foam tape (search Amazon- it's not expensive at all) and it's fine.Everything you receive is neatly packaged in easily identifiable bags. It comes with everything you'll need to put it together, except a Phillips screwdriver and two small wrenches. I used my 1/4" socket wrench with a 9/32" socket for the 4 nuts labeled "V" and a 10mm socket for the cap nut labeled "H." Make sure to not overtighten them or it may strip the threads. You can use Loctite Blue to keep them snug if you are at all concerned.This product is a 5-star product at a 2 and a half-star product price! I needed a way to safely place my laptop up and out of the way, so I could utilize my 27" monitor, keyboard, and mouse in my room. This product gave me that sturdy/solid stand I needed, without compromising the safety of my laptop.
Seth Gabriel Villavecer
Reviewed in Canada on December 27, 2021
Good Qualityfast shipping unfortunately it arrived without the tray just the vesa mount :(
KM
Reviewed in the United States on October 4, 2021
After I took it out I could tell how heavy duty it was, I was blown away. The stand/clasp is of greatttt quality and construction--thick bolts and metal, but not too heavy for the desk.The only fatal flaw it has--how weak its vesa plate is (the plate that attaches to your monitor). It's like they put a lot of work into the stand but not how it attaches a monitor. However, I am using it for specialized reasons. I'm using it on a drawing tablet, which obviously will be moving around way more than a simple monitor. The attachment is extremely simple, it just slides into the part that's on the stand, and has a single bolt on top to fasten it (horrible design). The bolt even has space within the hole, increasing wobble. After attaching my tablet to it, I noticed it doesn't really fit "snug" and wobbles if I nudge it/touch it. Not a loose wobble, but enough to make me concerned if it'll drop my 22" tablet. Thankfully, I'm using it at a pretty low height, so it can rely on the desk. The main reason I bought it was the 90 degree tilt. After installing it, the tablet could sit pretty well in front of me, almost like I'm drawing at a table.Maybe they let it have a little wobble so that you don't break your monitor off lmao, but it just makes me worried about its sturdiness in tougher situations. My tablet is apparently 15 pounds. The stand definitely feels fastened in place, just the plate definitely doesn't have the best design. They should have made it more sturdy in other ways. But I guess it doesn't matter if you're just using it as a stationary monitor stand. I don't even know how well it'd survive with both the tablet and the heavy laptop holder it came with (it's pretty heavy).One more comment about it's sturdiness, it's probably due to my tablet's weight, but the arm does weigh down a little if I place the tablet higher.Anyway, if you won't be putting a lot of weight on it and need a heavy duty mount to your desk, it works. If you want to use it as a drawing tablet stand, be aware the plate doesn't have the sturdiest design. Everything else is good, and if anything, just try to return it lol.
Recommended Products