Shopping Cart

Your cart is empty.

Your cart is empty.

IAG Air Oil Separator AOS for Ford Bronco 2021+ 2.7L V6 (Blue), Made in USA

Free shipping on orders over $29.99

$499.99

$ 99 .00 $99.00

In Stock

1.Color:Blue


  • INNOVATIVE DESIGN - The IAG Air Oil Separator is now available for 2021+ 2.7L Bronco. The IAG AOS is a smart investment to ensure your engine's optimal performance. Our advanced design is the outcome of years of thorough research, development, and testing. It features a 1-liter cast aluminum swirl pot canister that is designed to optimize the separation of oil from the PCV system upstream of PCV gasses’ return to the intake system. IAG's AOS sets itself apart with its heated cast aluminum housing, exceptional venting, and unique baffle design. Our AOS works with all fuel types, promoting longer engine life, enhanced crankcase ventilation, and compatibility with standard ECU calibrations.
  • KEEPS OIL OUT OF THE INTAKE - Keeping oil out of the intake is essential to prevent early mechanical issues and maintain engine performance. When oil gets into the intake, it coats internal parts like the intake, intercooler, pipes, and valves. This can speed up the deterioration of rubber or silicone hoses, leading to failures at the connections. Once it enters the intake tract, oil can flow into the intake manifold and eventually reach the engine's combustion chamber. This can cause problems like detonation, preignition, higher emissions, smoke, reduced power, lower fuel efficiency, and, in extreme cases, catastrophic engine failure.
  • NO MAINTENANCE REQUIRED - The IAG Air Oil Separator is designed to operate without the need for maintenance after installation. Unlike standard catch-can systems, our Air Oil Separators do not need regular emptying or upkeep. The separated oil collects on the AOS canister's inner walls and drains back into the engine's crankcase. Our special heating system prevents the oil from forming sludge, ensuring it can be safely reintroduced into the engine. The large capacity of the IAG AOS canister allows oil to drain slowly, which prevents overflow issues seen in smaller catch cans.
  • HOW DOES THE AOS WORK? WHAT’S INSIDE? - The IAG Air Oil Separator has a unique baffle system that collects the oil from your engine's PCV gasses and directs it back into the crankcase. The Separator canister was engineered with the inlet hoses on one side, generating a vortex of gasses inside. As these gasses circulate within the vortex, they pass through a set of baffles that capture the oil, allowing the gasses to escape from the top of the AOS. With the OEM PCV system operating normally, the engine draws extra vacuum on the AOS assembly, further reducing PCV gas.
  • MAINTAINS THE FUNCTIONALITY OF THE OEM PCV SYSTEM - The IAG AOS maintains the operation of the OEM PCV system while supplementing its capacity. The PCV discharge gasses from the IAG Air Oil Separator are routed back to the turbo inlet. A PCV valve is employed to generate extra suction, enhancing air-oil separation. In applications using ethanol fuel, our AOS provides protection against oil dilution and lubrication problems by capturing fuel vapors from the oil and directing them into the intake tract for combustion. The IAG AOS offers superior protection against oil entering the intake flow and oil dilution in the engine's lubrication system compared to the OEM PCV system by itself.
  • HEATED TO PREVENT CONDENSATION - The IAG Air Oil Separator utilizes an advanced heating system to solve an issue commonly seen in lower-quality catch cans. Condensation develops when hot gasses flow through a cold hose. Over time, the moisture mixes with the oil, creating sludge in the system. IAG has addressed this concern by connecting the AOS to the vehicle's cooling system, enabling heat transfer from the engine to the AOS. By heating the AOS body to match the engine's temperature, it significantly reduces or nearly eliminates both condensation and the associated buildup.
  • THE IAG HOOD PAD ISOLATOR - Included with our AOS is the IAG I-Line Hood Pad Isolator. This low-profile hood pad not only provides more space to accommodate the AOS, but it also contributes to improved engine cooling & reduced hood vibration. Constructed from a flocked fiber material, this sleek isolator features a stylish hexagon pattern that provides extra reinforcement to the pad, while helping to dampen engine noises and vibrations. The pad is easy to install, and the entire task can be completed within a matter of minutes. There is no need for cutting, drilling or permanent modifications, the pad mounts up to the existing mounting points under the hood using the included plastic clips.
  • EASY, PLUG AND PLAY INSTALLATION - Our engineers have designed this Air Oil Separator system to be as easy to install as possible on the 2021+ 2.7L Bronco. Our system includes custom injection- molded fittings for perfect fitment to your Bronco’s factory breather ports. There is no reason to modify any of the fittings, they are a direct fit for the factory ports.
  • COLOR OPTIONS - IAG’s Air Oil Separator for the 2021 + 2.7L Bronco engine is cast from durable and lightweight aluminum. This AOS features an attractive and resilient powder coated finish that is available in your choice of black, blue or red.



Product Description

IAG Air Oil Separator AOS For 2021+ 2.7L Ford Bronco

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

Innovative Design

This IAG Air Oil Separator works with 2021+ Bronco 2.3L & 2.7L. Our advanced AOS design features a 1-liter cast aluminum swirl pot canister designed to optimize the separation of oil from the PCV system upstream of PCV gasses’ return to the intake system. IAG's AOS features a heated cast aluminum housing, exceptional venting, and unique baffle design. Our AOS works with all fuel types, promoting longer engine life, enhanced crankcase ventilation, and compatibility with standard ECU calibrations.

IAG Ford Bronco Air Oil Separator AOS 6G 2021 2022 2023 2024 2025
IAG Off Road Ford Bronco 6G AOS Air Oil Separator

Keeps oil out of the intake

Keeping oil out of the intake is key to engine performance and longevity. This is crucial for EcoBoost engines that are prone to oil buildup on the valves. Oil in the intake can coat the intercooler, pipes and valves, causing damage to rubber or silicone hoses, leading to failed connections. Once inside the intake tract, oil can enter the manifold, then the combustion chamber where it can cause detonation, preignition, high emissions, smoke, low power, low gas mileage and even engine failure.

No maintenance required


Unlike standard catch-can systems, our Air Oil Separators do not need regular emptying or upkeep. The separated oil collects on the AOS canister's inner walls and drains back into the engine's crankcase. Our special heating system prevents the oil from forming sludge, ensuring it can be safely reintroduced into the engine. The large capacity of the IAG AOS canister allows oil to drain slowly, which prevents overflow issues seen in smaller catch cans.

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

Heated to prevent condensation


The IAG AOS has a advanced heating system to solve an issue commonly seen in lower-quality catch cans. Condensation develops when hot gasses flow through a cold hose. Overtime, the moisture mixes with the oil, creating sludge. IAG addressed this concern by connecting the AOS to the cooling system, enabling heat transfer from the engine to the AOS. By heating the AOS body to match the engine's temperature, it significantly reduces or nearly eliminates both condensation and the associated buildup.

IAG Made in USA Ford Bronco 6G 2021 2022 2023 2024 Accessories Parts 2 4 Door

Made in USA

The IAG Air Oil Separator is designed, manufactured and powder coated in-house right here in the United States.

IAG Ford Bronco Air Oil Separator AOS 6G 2021 2022 2023 2024 2025 Off Road Engine Motor Accessories

Hood pad isolator included

This low-profile hood pad not only provides more space to accommodate the AOS, but it also allows improved engine cooling & reduced hood vibration.

IAG Ford Bronco Air Oil Separator AOS 6G 2021 2022 2023 2024 2025 Off Road Engine Motor Accessories

Easy, plug & play installation

Our system includes custom injection-molded fittings for perfect fitment to your Bronco’s factory breather ports.

IAG Ford Bronco Air Oil Separator AOS 6G 2021 2022 2023 2024 2025 Off Road Engine Motor Accessories

Color Options

The AOS features an attractive and resilient powder coated finish that is available in your choice of black, blue or red.


Customer
Reviewed in the United States on February 5, 2025
install video was spot on. easy install with minimum tools. would be nice to put a link to the video in the box with the product though.