Shopping Cart

Your cart is empty.

Your cart is empty.

IAG Rock Armor Engine Skid Plate with Oil Pan Access for Ford Bronco 2021+ 2/4 Door (Not Raptor or Sport), Made in USA

4.8 (7) Write Review
Free shipping on orders over $29.99

$179.99

$ 87 .99 $87.99

In Stock
  • SUPERIOR PROTECTION - Add a layer of heavy-duty protection and upgrade your Bronco’s factory skid plates with IAG’s Rock Armor Engine Skid Plate. This tough skid plate is designed to seamlessly fit the 2021+ Bronco. Thicker and stronger than Bronco’s stock shields, our Rock Armor Engine Skid Plate provides a greater level of protection to your front undercarriage, intercooler and other vulnerable components. Confidently take on boulders, branches and debris without having to worry about costly damage to your Bronco’s engine.
  • HEAVY-DUTY CONSTRUCTION - The IAG Rock Armor Engine Skid Plate is constructed from heavy-duty steel and comes with fasteners that sink below the face of the skid plate for a smooth surface that can easily slide over obstacles without damage to the vehicle, the skid plate or the hardware. This skid plate is 3/16” thick, providing a layer of reliable protection for your Bronco. It features a durable black powder coated finish that is designed to resist corrosion, minor scratches, and premature wear.
  • EASY OIL PAN ACCESS - The IAG Rock Armor Engine Skid Plate features an innovative service panel design that provides easy access to the oil drain plug. Simply remove a single bolt and slide the panel open to reach the drain plug. This convenient feature simplifies maintenance, making oil services quick and efficient without needing to remove the entire skid plate.
  • MAXIMUM COVERAGE - The IAG Rock Armor Engine Skid Plate can be used as a stand-alone item or in combination with other IAG Rock Armor Skid Plates for maximum coverage. IAG’s Rock Armor components were designed to fit tightly together with smooth transitions from one plate to the next in order to keep your Bronco from getting hung up on obstacles, providing as much protection as possible to your undercarriage. Our IAG Rock Armor Skid Plates are proudly made in the USA and we stand behind our product.
  • MADE IN THE USA - We're proud to say that our products are manufactured right here in our facility in Westminster, MD. IAG Performance was founded in 2007 as an innovator in vehicle performance and off-road products. We offer a wide variety of problem-solving aftermarket products. Our friendly, USA based staff is also here to help with any installation questions you might have.
  • EASY INSTALLATION - The IAG Rock Armor Engine Skid Plate features an innovative service panel design that provides easy access to the oil filter. Simply remove a single bolt and slide the panel open to reach the filter. This convenient feature simplifies maintenance, making oil services quick and efficient without needing to remove the entire skid plate.
  • FITMENT - Fits Ford Bronco 2021+ Two & Four Door (NOT Bronco Raptor or Sport)


Product Description

IAG Off-Road Rock Armor Skid Plates Ford Bronco 6G 2 4 Door Performance Protection Steel
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

Unparalleled Protection

Confidently take on the trails with IAG’s Rock Armor Engine Skid Plate. This skid plate will allow you to tackle rough and rocky terrain without the worry of potential harm to your engine. This is an easy upgrade for any Bronco that came equipped with the factory plastic splash guards, and is an essential modification to protect your investment. IAG’s Rock Armor options are even thicker and stronger than Bronco’s stock metal shields, and provide a greater level of protection for your engine.

IAG Rock Armor Engine Skid Plate for 2021+ Ford Bronco 6G Accessories Protection Off Road
IAG Rock Armor Engine Skid Plate for 2021+ Ford Bronco 6G Accessories Protection Off Road

Built tough to last

The IAG Rock Armor Engine Skid Plate is made from heavy-duty 3/16” steel with a black powder coated finish that helps to prevent rust, scratches and wear. The included fasteners are designed to sink below the surface of the skid plate, allowing it to easily slide over obstacles without damage to the vehicle, the skid plate or the hardware. This versatile skid plate can be used in conjunction with your factory skids, allowing you to provide extra protection where you need it.

Maximum Coverage

The IAG Rock Armor Engine Skid Plate can be used as a stand-alone item or in addition to other IAG Rock Armor Skid Plates for maximum coverage. IAG’s Rock Armor components were designed to fit tightly together with smooth transitions from one plate to the next in order to keep your Bronco from getting hung up on obstacles. Our IAG Rock Armor Skid Plates are proudly made in the USA and we stand behind our product.

IAG Rock Armor Engine Skid Plate for 2021+ Ford Bronco 6G Accessories Protection Off Road
IAG Rock Armor Engine Skid Plate for 2021+ Ford Bronco 6G Accessories Protection Off Road

Made in the USA

We're proud to say that our products are manufactured right here in our facility in Westminster, MD. IAG Performance was founded in 2007 as an innovator in vehicle performance and off-road products. We offer a wide variety of problem-solving aftermarket products. Our friendly, USA based, support staff is also here to help with any installation questions you might have.


WBT
Reviewed in the United States on July 17, 2024
We installed them yesterday! Fast and easy install and are heavy duty.
John D.
Reviewed in the United States on March 29, 2024
Very heavy (45lbs) but only took about 30 minutes to install. The bolts could be longer for the rear slide on mounts. Had to use the oem bolt on the driver's side rear mount.
Thomas L.
Reviewed in the United States on March 10, 2024
The front plate didn't quite fit my '23 Outer Banks. The front two holes were about 3/4 of a hole off (too widely spaced for the OEM frame horn brackets). And this is a brand new vehicle so there is no frame damage. Luckily I have a well equipped shop so a little die grinder work expanded the slots on the inner edge so they would bolt up. This did however, necessitate that I use the longer and larger washer OEM bolts, so the heads are not recessed like they should be. All other slots and holes lined up on both the front and engine plates. I haven't done the transmission plate yet. And one final thing, I'm disappointed that you have to remove the larger front plate in order to remove the engine plate! Makes changing oil even more difficult and time consuming. Unlike your amazon text says, you cannot use these with the OEM plastic splash guards.
mtnmanbrad
Reviewed in the United States on November 27, 2024
Good quality at a decent price, fast shipping
cortley shoemaker
Reviewed in the United States on November 24, 2024
Very well made and heavy duty. It took about 20 min to install and that was counting getting tools ready. Fit was great and torqued to 66 lbs.
Joe Mama
Reviewed in the United States on November 16, 2024
It works, but the fit is not quite right. When I get a chance, I'll add a photo to the review so you can see for yourself. Acceptable at this pricing point and I've got some peace of mind when offroading. It's pretty heavy - I wish there was an aluminum option.
MJ
Reviewed in the United States on November 13, 2024
Good luck installing this in your driveway. The backing plates that are installed on the inside of the bracket are extremely difficult to install. There’s gotta be a better design.