Your cart is empty.
Your cart is empty.With Eheim Install Sets 1 and 2, all external filter makes with hose diameters of 0.50"/0.65" can be perfectly optimised in the suction or pressure area. Firm connection with variable installation and selective function is ensured by the plug-in connections.Eheim Installation Set 1 improves the suction effect through its piping that creates a current-like flow and the compact overflow arc that is fitted with a practical quick release coupling. At the same time, the set can be used as a suction aid for external filters that have a shut-off device in the suction area. Otherwise an additional shut-off valve is installed there. In addition, the opening with a closing cap in the overflow arc can be used to clean pipes and hoses conveniently.In the flow area Installation Set 2 ensures optimum pressure conditions with variable installation options. The water outlet can be adapted to the aquarium dimensions by means of the plug-in nozzle tubes, the hoses can be connected safely thanks to the quick release coupling, and the set can be easily cleaned via the closing cap on the overflow arc. A separate nozzle set including an elbow and three different attachments as a wide jet, outlet or adapter for connecting a diffusor is also available as an accessory.Eheim Installation Set 2 (Pressure Side) A variety of outlet possibilities Modular assembly Suitable for all aquarium heights and external filters Simple and safe tube connections with the new quick-release coupling Trouble-free cleaning of hoses Simple air discharge
christopher
Reviewed in Germany on September 1, 2024
Nach einiger Suche für einen geeigneten Zulauf meines Eheim Vivaline 180 led, bin ich mit diesem Artikel fündig geworden.Ich bin vollkommen zufrieden :)
Fehmi özdemir
Reviewed in Turkey on February 22, 2024
ürün için gereken herşeyin verildiği söylense de . satış esnasında 50 cm den uzun akvryumlarda uyumlu olmayacağı söylenmemiş. ürünün bir diğer sıkıntısı ise aşırı derecede kir tutması. temizlik açısından ciddi problemlere yol açıyor. motor debi düşmesinden tutun vs sıkıntılar.
Lycée M.
Reviewed in France on August 27, 2023
Facile à installer, réglable en longueur, un bouchon permet de passer un goupillon pour nettoyer le tuyau de rejet venant de la pompe
Duflos Natacha
Reviewed in France on November 11, 2020
Du eheim donc au top! Ayant un aquarium particulier non rectangulaire le fait de pouvoir orienter les 3 morceaux différemment c'est vraiment bien !Pas besoin de se poser la question du diamètre de tuyau, c'est vraiment la bonne dimension.Le moins dans un aquarium profond: un peu trop juste ! À voir s'il existe une extension, pas vu!Le plus : le nettoyage facilité avec le bouchon sur le dessus ! Pas besoin de tout démonter un coup de goupillon c'est fait
Thorsten M.
Reviewed in Germany on January 23, 2019
Da ich mit den zum Filter mitgelieferten Rohren überhaupt nicht klarkam, habe ich die beiden Installationssets (Druck- und Saugseite) nachbestellt. Ich bin damit super zufrieden. Die Vorteile sind:1) Sicherheit: Im Gegensatz zu den mitgelieferten Rohren werden die aufgesteckten Schläuche gesichert.2) Anpassung: Durch den modularen Aufbau kann das jeweilige Set den Gegebenheiten im Aquarium angepasst werden. Bei Bedarf können Winkel, Verlängerungen etc. ergänzt werden.3) Installation: Zumindest bei meinem Eheim Aquarium passten die Installationssets genau in die Aussparungen. Der Deckel schließt nach wie vor vollständig (Essentiell wenn auch Katzen im Haushalt sind.)4) Reinigen: Alle Teile können wieder einfach zerlegt werden und auch gut von Innen gereinigt werden.5) Platz: Durch die scharfen Winkel kann das Aquarium dichter an der Wandstehen als bei den mitgelieferten Rohren.6) Optik: Sieht einfach deutlich professioneller aus.Mein Fazit: Quält euch gar nicht erst mit dem mitgelieferten Zeug rum und kauft gleich die Sets zu eurem Filter dazu.
Happy Shopper
Reviewed in the United States on June 10, 2018
Bought this wand outflow kit to use in my 36 gallon bow front aquarium and the canister is an Eheim as well. It is a well made product but I have mixed feelings about it. First all the section connect using a groove and o-ring seal sliding together. Sounds great and for most part it is. However new with non lubricated o-rings it is terribly stiff to rotate. Apply silicon grease and they rotate at a breath's pressure which is too easy. I do like they give you two elbows, I used them both see the photo attached. On the horizontal sections I have the outlet holes pointing toward the front of tank. On the short single vertical section I have the outlet holes turned to the left so the flow is going straight back toward my heater. I have lots bubbles coming up to meet it so you know what those are. I took a dry photo so you can see everything that comes in the package, assembled. The last photo shows my smoke color tubing connected and installed over the lip of the tank. This way you see how the tubing is attached. See the cap? It leaked a lot dribbling but not flowing. I took it off and applied silicon grease here as well, lots of it so it acts like a thread sealant and it stopped the leak. It was mixed bag of thoughts as I installed it but I have to say I really do like you can configure it any way you like. I really like the tubing lock nut. Oh one last thing this replaced an Eheim wand that just U'd over the rim and went straight, factory supplied with the canister 4+ 350. The hole size in that wand was perfect deliver the flow at the perfect velocity. This new wand apparently has smaller holes because the same flow is coming out at much higher velocity. I will end up drilling them out larger when I have time next week.6-15-2018 UpdateChecked the hole size this week and they were indeed significantly smaller the factory wand from Eheim for 4+ 350 canister. I drilled these out (easily) with a 3/16" drill bit and put back in use. Velocity is where it belongs now very pleased with it. Devil is in the details. LOL
Justin Dewd
Reviewed in the United States on May 20, 2015
It's okay, but a little hard to position. The suction cups won't hold the far end because of the weight of the hose on the opposite end. The unit should really be designed to place the hose in the center with a diffuser or on the ends. Other than that, periodic cleaning with a bottle washer is needed.
Jim
Reviewed in the United States on April 19, 2015
Perfect fit for my Eheim 2262. Wish they made the intake kit for it.
Matthew
Reviewed in the United States on September 14, 2013
I'm using the spray bar for a . I had worried that the cross brand installation would create some kind of problem - it did not.It comes as a confusing bag of tubs, joints and parts but only takes minutes to setup. It fits perfectly with my Fluval 206 ribbed hose*. There are no leaks. The unit comes with a second elbow (pictured), allowing me to install it as an 'L' shape. The flow is nice and the three spray tubes can be independently aimed allow for very customizable water flow. Every few months I change the configuration of the spray bar, to "change things up" in the tank.The instructions are clear and easy to follow. Frankly all you need to do is look at the diagram and everything makes sense. It's a quality product, thoughtful designed and well made. I did buy two more suction cups to make it feel more secure. I never had trouble the original suction cups I just wanted the extra ones.It fits well in my 29G tank.*It should work with all the Fluval canister filters in the '04, '05 and '06 series. It works fine with my Fluval 206.
JT
Reviewed in the United States on November 3, 2013
Great spray bar a little expensive bit well worth it ,fast shipping accessories the "T" and the flat sprayer are good additions also
Recommended Products
