Your cart is empty.
Your cart is empty.Product Description
ISPINNER Wall Anchor Setting Tool with 18pcs Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit, Heavy Duty Anchor Gun
HIGH QUALITY MATERIAL
The anchor gun is made of heavy duty solid metal with non-slip rubber grips. Molly bolts are made of high quality zinc plated carbon steel with high hardness, wear resistance and rust resistance.
HOW TO USE
1. First drill a hole in the wall.
2. Then insert the molly bolt into the hole.
3. Use the setting tool to clamp the screw head and pull it outwards to expand the anchor bolt.
PACKAGE INCLUDES
- 1pc Anchor Setting Tool
- 4pcs 4x32mm Anchors
- 4pcs 4x60mm Anchors
- 4pcs 5x52mm Anchors
- 4pcs 5x65mm Anchors
- 2pcs 6x52mm Anchors
Calvin
Reviewed in Canada on January 7, 2025
It works really well. I was impressed how easy and how strong these actually are. Will definitely by again.
Len
Reviewed in the United States on December 19, 2024
This is a must have for setting Molly Bolts.
SuperShooter
Reviewed in the United States on August 2, 2023
If youve ever used Molly bolts, you probably just drill a hole, hammer the bolt into the hole, and tighten the screw until the anchor legs are spread. The downside to that is the risk of chewing up the material due to the locking tab of the bolt being over-torqued.Enter a setting tool, the RIGHT WAY to use Molly bolts. Once the anchor is hammered in, back out its screw a quarter inch, slip the setting tool around the screw head, and PULL the anchor into place.The setting tool is ratcheted so it doesn't slip off the screw head while you're squeezing the grip handle. And it stays put until the silver lever snaps it back into place.Don't take shortcuts like using a screwdriver for a pry bar. Avoid damaged wallboard and rounded-out screw heads by using the proper tool for the job.This setting tool is VERY well-designed and easy to use. Highly recommended.
AVP
Reviewed in Canada on August 14, 2023
Great find. Tool is easy to use but takes a fee tries to get right. Great find.
my 2 cents worth
Reviewed in the United States on February 16, 2023
Why would you send a tool out with no directions? I had to look online and see the tool description to see how to use it, how much work would it have been to put a slip in the package with the 4 step instructions?Ok I now have 2 molly bolts in my wall that this tool does not set.Now I have to wait for Grandpa to come over and do it the old fashioned way..Waste of time and energy.....it does not work
Bryan Betz
Reviewed in the United States on November 8, 2023
I bought this product to install a shelf in my bathroom.The anchor gun was easy to use and the molly bolts were easy to install.The shelf is now securely attached to the wall and I am very happy with the product.Hereare some of the pros and cons of the ISPINNER Wall Anchor Setting Tool:**Pros:*** Easy to use* Easy to install molly bolts* Securely attaches shelves to walls* Affordable**Cons:*** Not as powerful as some other anchor guns* May not be suitable for heavy-duty applicationsOverall, I am very happy with the ISPINNER Wall Anchor Setting Tool and would recommend it to others.
NP
Reviewed in the United States on April 1, 2022
The anchors are great and worked perfectly for the project we needed. However, I ended up only needing one of the sizes in the box and the tool that came with it was totally useless. My son who was helping me with this project, found it to be more cumbersome to use the tool than to simply apply the anchor with a hammer. Next time I would purchase only the wall anchors screws but I really don't think you need this tool.Plus you need to find out what size of wall anchor is needed rather than having a box full of different sizes so lessoned learned and money wasted!
Sergio Barrón
Reviewed in Mexico on February 13, 2021
Trabaja muy bien para lo que fue diseñada.
Wade Shaw
Reviewed in the United States on July 5, 2020
This tool is vital for any hollow wall anchor that supports a medium to heavy weight, by deforming against the back of the wall after placement. The tool prevents common spinning of the anchor behind and in front of the wall which can tear up the wall face and result in it pulling free easily.As you press the tool against the wall, the tool retracts the screw towards you, which expands the anchor "legs" against the inside wall. These opposite, forceful motions are nearly impossible to synchronize without such a tool, because you have to push and pull on a very small object at the same time.One tip-- the anchors that come with this tool have a small washer below the screw head. Do not try to capture this washer with the retractor of the tool-- they just slip off. Take off the screw before retraction. Otherwise the tool works well, and would probablhy work on other types of anchors that do not screw through the wall.
Mohammad
Reviewed in the United Arab Emirates on December 9, 2020
Very good
Cliente de
Reviewed in Mexico on December 18, 2020
He probado varios tipos de fijación en muros de yeso, y en mi opinión ésta es una gran opción ya que resiste mas que otros, la pistola es fácil de usar y se nota la calidad
J. Davel
Reviewed in the United States on November 15, 2020
I want this for into into 1/2" to 3/4" drywall and only half of the bolts are useful for that. The 52mm ones work great in typical drywall or either size. (see pics) Longer ones don't. They'd be loose. But maybe some unique applications in thinner fiber board or a thick foam brick core will come up some day. In experimenting I found the short 32mm ones can expand inside the drywall somehow and work, but they didn't stay straight and got hard to thread. I'm sure they are meant for thinner fiberboard. (I think I've seen M4 between 38mm and 48mm that could work in drywall.)Having the tool makes installation much more reasonable too. Glad to have gotten the tool. I'd give it 5 stars if they described best uses for each (for a DIY'er) instead of making me experiment and use up a few of the bolts. I love molly bolts much more than other drywall inserts.
34hjk79
Reviewed in the United States on December 12, 2019
So I recently made the sunburst clock and it's hardwood and 40" across and it's a real beast--I estimate its weight at about 10-12 lbs.. I wasn't confident about finding a stud for a hanger and I felt a plastic anchor was sort of sketchy. After watching a few videos on hanging heavy things like mirrors, I decided a molly bolt was the way to go. I needed a setting gun and I'm glad I chose this one.I received the product today and was very pleased. The tool is easy to work and feels well made. It came with an assortment of bolts in a nice hardshell container. I decided on the 32mm size and after watching another brief video (in which I think the British demonstrator was using the exact same tool) the installation was a snap. I put the screw through a regular heavy duty picture hanger and I think this clock isn't going anywhere.Like I said, it's a nice tool and I think it would last a handyman an entire career. I wanted it earlier but oddly enough the big box stores near me didn't seem to carry it so waiting a few days I had to do. I'm grateful I could get the whole thing for under $20 from Amazon, but realistically, I have no idea when I'll ever use it again. This really seems like the kind of specialized tool that ideally could be checked out from a library.
Recommended Products