Shopping Cart

Your cart is empty.

Your cart is empty.

J&L Oil Separator Co. Oil Separator 3.0 Compatible with 2020-2025 Explorer 3L & 2020-2025 Lincoln Aviator 3L Passenger Side (Black)

4.4 (8) Write Review
Free shipping on orders over $29.99

$169.00

$ 76 .99 $76.99

In Stock

1.Color:Silver


  • knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks.
  • Filtering consists of a fine mesh stainless steel filter that traps fine oil vapors and releases them once heavy enough to fall.
  • The tank holds 3 oz of fluid, Check the oil separator after 1000 miles of
  • Most applications can make it 2500-3500 before filling the unit but every vehicle is different
  • Oil Separators


Product Description

Protect your engine

Compatible with:

  • 2020-2024 Ford Explorer 3.0L EcoBoost including ST models.
  • 2020-2024 Lincoln Aviator 3.0L EcoBoost

J&L Oil Separator 3.0 Oil Separator

  • 3oz Capacity
  • Solid billet construction.
  • OEM Style quick connect PCV fittings
  • Filtered system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake.
  • Easy Plug & Play installation

How does it work?

During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors can gather/accumulate in your intake tube, intake manifold runners and even dilute your gas, lowering its octane level. This happens in all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled from solid billet aluminum this is a rock solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks. This product is NOT CARB (California Air Resource Board) Exempt. It is not for legal sale or use in the state of CA or any other states adopting CA emission standards and require a CA Executive Order (EO) number.

The J&L Oil Separator Difference

Easy Installation, made in the USA

Thoughtful design proudly Made In The USA

  • We design our oil separators to be easy to install and easy to live with. Most installations can be completed with simple hand tools. Our oil separators are fully assembled which makes the job very easy for you! Installation videos are available to follow along with.
  • J&L OSC oil separators are all proudly made, assembled and supported from our location in Chesapeake, Virginia.

Frequently Asked Questions

How often do I need to check my oil separator?

Most applications average about an ounce of oil every thousand miles. However, there are many factors in collection rate as every single engine is different. Factors such as driving style, climate, engine condition, oil level all vary and effect collection rate. People in cold climates will have to check their oil separator more often in the winter months due to condensation build up occurring in the oil separator itself. In these months, the air entering the can is significantly hotter than the ambient air temp. This results in condensation build up (think hot shower in a cold bathroom). We recommend everyone to check their oil separator 500-1000 miles after initial installation to get an idea of how often it needs to be serviced. The can holds 3 ounces without the optional extension.

Do I need an oil separator on both sides of my engine?

In most cases you only need an oil separator on the PCV side (dirty side) of the engine. This is the side that is under vacuum/suction most of the time while the vehicle is running and driving. The clean side typically is only used for venting when the PCV valve is closed which is under moderate to high acceleration. Some turbo vehicles can see oil in the clean side, such as EcoBoost F-150’s when they are exposed to frequent heavy towing conditions. On non-turbo applications anything short of road course racing you typically will not see a drop of collection out of the clean side.

What do I do with the oil that collects in the oil separator, can I put it back in the engine?

No! Dispose of this nasty oil that is mixed with fuel, water and everything else where you would dispose of your oil change oil. Many auto parts stores will take your old oil for free of charge.


Customer
Reviewed in the United States on February 2, 2025
Fit perfectly. Works great. Easy install.
Kent M
Reviewed in the United States on August 13, 2024
I bought one for our Explorer ST and one hoses was a very tight fit, riding hard on another hose. I contacted J&L and gave them the length that would work and they immediately sent out a replacement hose with fittings. Apparently the 2024 Explorer ST is a bit different than standard Explorers. They said that they would incorporate the info that I gave them for future customer orders. A top notch company!
C
Reviewed in the United States on July 23, 2024
Very quick and easy install on my wife's 2022 Explorer ST. Changed the oil and checked the can to find it with an inch or so of oil in it. Not as much as I was expecting so we'll see how it looks on the next oil change, but it's clearly doing it's job. Install was less than 10 minutes total.
Sydney
Reviewed in the United States on July 21, 2024
Very well built productExtremely easy to installIncluded links for pdf style or videos style instructions
Ben
Reviewed in the United States on July 15, 2024
2 minutes install. Works great. Well made. Fits perfect in my 2020 Lincoln Aviator.
Patrick M Beavan
Reviewed in the United States on December 23, 2024
Very good product. I will buy this again for any other vehicle I buy. Great quality. Price isn't bad, could be cheaper but all car products are expensive.
Matt Piermont
Reviewed in the United States on December 12, 2024
Great quality and perfect fitment.
ChevyRacer
Reviewed in the United States on November 9, 2024
I installed mine today on my Explorer ST (3.0 twin turbo). It took less than 15 minutes. This kit is so well thought out and has a great aesthetic!