Your cart is empty.
Your cart is empty.KAISH Black 2 Pin Locking Tuners Tuning Keys Pegs Machine Heads for Stratocaster/Telecaster Strat/Tele Made in USA
Jordan H
Reviewed in the United States on July 29, 2024
I’m using these on my Fojill Guitar build giveaway guitar on my YouTube channel!Link:These are good value for money, and they look great on my guitar classing it up, they fit into the predrilled holes of the guitar with no issues, and they keep tuning locked in even with heavy riffs and bends.
Brian B.
Reviewed in the United States on October 19, 2024
Not smooth turning.
Michael Bickham
Reviewed in the United States on April 24, 2024
Look and fit very good
Bilsdragon
Reviewed in the United States on August 4, 2023
They drop right in, no changes, holes, or adjustments. I'm not sure the quality matches American Pro II, but they look good and work well. If you have to change anything on your guitar, it is probably one of the Asian models that use the slightly smaller two pin tuners. I modified guitars to get rid of those and to use the larger size like these. It is very easy to fit these in place of smaller two pin tuners. You may have to ream the peg hole for the larger tuners, a hand reamer and slowly is beast. You won't have to work at it much to remove enough material in the hole. Then just install the new ones, do this one at a time, get it aligned, and gently tighten the bushing screw on top to hold it in place. You can probably use your thumb to push on the back of the tuner to make some marks for you new pin holes. Get the right bit, and mark it with a sharpie or tape for the depth. The hole does not need to be deep. If the bit you have is slightly smaller, you can push them in tight with your thumb. Work slowly and just be patient, it is not a race. I would be careful about using the bushing screw from the top to squish it in place if the pin holes are tight. That bushing screw was only made to sandwich the neck. Good luck, this is an easy upgrade, making string changes taking only minutes in the future.
John propernick
Reviewed in the United States on November 19, 2023
I like everything about these tuners had a little bit of pitting, but that’s OK. The price was awesome and they function very well.
GALLI
Reviewed in the United States on January 17, 2023
These are quite good locking tuners. But mind you, these will not fit the Fenders or Squiers 2-pin tuners produced after 2020, as the 2-pin holes are located on the smaller tuners now produced from Fender, and you will be required to drill the head small 2-pin holes in order to adapt and duly fit these pegs. So do ask and verify with the Seller prior to your purchase.
TedM
Reviewed in the United States on December 10, 2022
You may have a different experience but I had to drill extra holes in the head to use these tuners but, after doing so, they are really great. Very stable and keep great tune.
Allan Tomkins
Reviewed in Australia on November 17, 2022
They were an exact fit
Rachel Ghanem
Reviewed in the United Arab Emirates on February 8, 2020
Good
R. Goudie
Reviewed in Canada on August 9, 2019
I bought these as an alternative to the planet waves or gotoh style inline locking tuners and I was pleasantly surprised.You need to drill two small holes to anchor the machine head in place, very secure ... much better than a set screw. The posts are tight and firm, no wiggle or play...holds it's tune very well so far.These are a good option in between the cheap china stuff and the overpriced fender gear.
Dave from The Wombat Says(YouTube)
Reviewed in the United States on March 8, 2019
I bought these tuners for my Squier Bullet Telecaster. I had purchased the guitar as a new, but damaged model. Three of the original tuning pegs were broken. The Kaish tuners had two locating pins like the originals so I thought they would be easy to replace. They were easy to replace, but I did need to drill two new holes for each peg. There is a wheel on the back of each tuner. This is a locking mechanism and it holds your strings in place while tuning or changing your strings. I am planing on purchasing more sets in the future for some other guitars that need an upgrade. Bottom line is I am very happy with them.
GB
Reviewed in Germany on May 16, 2018
Wirbeln müssen zwei Aufgaben erfüllen:Sie müssen sich vernünftig drehen lassen, um die Saiten stimmen zu können und sie müssen die Stimmung halten.+ Sie halten die Stimmung ganz passabe,l für den Preis.- bei drehen der Wirbel gibt es sehr viel Leerlauf. Man dreht ein viertel ohne, dass sich etwas tut. Das ist leider sehr mühsam.- Zusätzlich lassen sich die Wirbel auch sehr streng drehen.Ich habe nicht die super tollen Wirbel um den Preis erwartet ,bin dennoch enttäuscht und würde sie nicht weiter empfehlen.
A POLLARD
Reviewed in the United Kingdom on September 14, 2017
Early days but they work well. Simple locking method and appear well made, but ask me in a year. What I can say is that they fit my Fender's neck perfectly - nice and snug in the bore and locating holes with no play. The originals (Fender) were loose - you'd think that they were the budget tuners.
Recommended Products
$70.77
$ 28 .99 $28.99
$12.99
$ 6 .99 $6.99