Your cart is empty.
Your cart is empty.Bassik - simple, clean, easy. This is the foundation of what KnuKonceptz calls Bassik. Easy to install, simple to connect and cost effective! The BK-1024 accepts 0 or 4 gauge in and 4 or 8 gauge power wire out without the use of adapters. Oversized allen screws can secure either gauge without any modification or additional parts to complicate the design. The BK-1024 fuse block has a single oval input which can accommodate either 4 or 1/0 as the main input gauge. Each output is fused by a Mini-ANL style fuse with a max load of 150A per circuit. Your choice of two fuses is included with the BK-1024 Select "Link" to turn your BK-1024 into a two way ground distribution block
John
Reviewed in Australia on February 7, 2025
Crazy how small this thing is while still being able to fit a 1/0 gauge cable, including ferrule. The cover clips on with tabs, and there a 2 countersunk mounting holes in the middle. Overall quality is good, and the compact size makes it easy to install.
Marcos Roman
Reviewed in the United States on December 28, 2024
Really good
karthik krishnan
Reviewed in the United States on November 24, 2024
Wish there was ground and power distribution in one block.
Kindle Customer
Reviewed in the United States on October 18, 2024
comes with 2 100A fuses. I don't need them that powerful but i got other fuses I can use
Dave Rechel
Reviewed in the United States on November 14, 2023
Works as expected
Bob B.
Reviewed in Canada on January 12, 2023
The one piece was not attached in the packaging. Had to remove 4 stickers to Reveal the screws. Tried to install the screws and they’re not long enough to go through the plastic and screw into the metal.
RB
Reviewed in Canada on June 23, 2022
Product looks well made and at a good price.
Art_M.
Reviewed in the United States on November 8, 2022
Big Kev-o
Reviewed in the United States on November 15, 2021
Overall a decent product considering the price. Look clean & works well. Take caution when screwing it down. If you tighten the flat head machine screws down too much it will break the plastic base. Also be careful not to break the base when tightening the allen head wire terminal blocks. KnuKoncepts basik battery terminals are excellent. Fuse distribution blocks are just OK.
Lukas
Reviewed in Canada on September 7, 2020
A nice little fuse block was exactly what I needed for my amplifier install. 2 guage wire in and two 4 guage wires out.
phenryiv1
Reviewed in the United States on June 11, 2020
I needed a simple 1-to-2 distribution block with a 4 gauge input and a pair of 10 gauge outputs. Even though this was listed as only going down to an 8 gauge, the hardware was sturdy enough to clamp down on a 10 gauge wire. (For those who don't know, in wire, the larger the number the smaller the wire.)The plastic cover fit well and the screw terminals were very tight. The screws attached tightly to the wiring and have not backed out.I highly recommend using this for unfused distribution in a 12V stereo install.
pandorazbox
Reviewed in Canada on October 8, 2020
good little distribution block for my stereo wires. the 1/0gauge wire fit perfect.
Bill H.
Reviewed in the United States on September 21, 2018
Good quality for the price. Oval 1/0 terminal fits nice and snug on my SHCA ofc 1/0 wire. Nice and compact.
Recommended Products
