Your cart is empty.
Your cart is empty.Product Description
Note:
1.Choose a suitable lens holder as follows:
a) Determine the lens holder height listed in the lens specifications for your selected lens. If you use a different lens holder height, you might not be able to focus the lens at all.
b) Ensure that the lens holder matches the screw hole pitch of your camera board. Lens holders are available with18mm and 20mm pitches.
2.If required, the thread gap between the lens and lens holder can be filled with damping grease or similar glue in order to fix the lens in position after focusing.
3.Specks of dust or tiny bubblers might be visible on the image while focusing the lens. These will disappear when the lens is in focus, and will not affect image quality.
4.When focusing or replacing a lens, do not screw the lens into the lens holder too deep, otherwise the lens might touch and damage the image sensor. Often, focusing a lens is performed while monitoring the image quality on a video screen. A blurry image will result if the lens is screwed in either too deep or too shallow from where it is in focus.
5.You have to manually remove the IR filter at the bottom of the lenses when using them with a NoIR camera
Brent Leppke
Reviewed in the United States on March 7, 2025
No issues
Betsy J. Ryan
Reviewed in the United States on August 21, 2024
Quality not worth the cost. I'm seeing some chromatic aberration. None of the four adapters fit my camera. I had to make my own adapter.
Cheezy
Reviewed in the United Kingdom on March 23, 2023
As I didn’t know which angle of lens I needed to allow me to mount a camera inside the AtomStack enclosure and still be able to view the entire cutting area, I bought this set to allow a bit of trial and error. Ended up using a 140mm BTW and works great. So handy to be able to take a still of the material on the cutting area and align the job on Lightburn with the material being cut. Much less waste material
Paul Hoover
Reviewed in the United States on April 30, 2022
These lenses are perfect for the Raspberry Pi project that I'm working on. It was easy to find them and the fulfillment turn around from the seller was great. Support your "Ma & Pa sellers" and order from Arducam
satisfide!
Reviewed in the United States on June 5, 2021
Like it all. A very interesting lens set, which covers most needs. A good value for money.
hal0bender
Reviewed in the United States on June 9, 2019
Its a great assortment of lenses for the Arducam. I did have some issues with one of the lenses, contacted the company and they have been quick to replace it. Other than that, for the Raspberry cam enthusiast this is a great collection!
Six cats in a trenchcoat.
Reviewed in the United States on June 11, 2019
Make sure your arducam module has changeable mounts so you don't have to order a different one like I did.
Adam Goodwin
Reviewed in the United States on May 29, 2019
Most of the specs were available (missing a few) and it was a perfect sample for what I needed. Great set of different angled lenses to determine FOV, and get a benchmark for other necessary specs. Especially useful if you have potentially changing applications.
Joseph A. Vrba
Reviewed in the United States on February 23, 2019
Sure, we could just use the lens that came with the camera. We could have estimated which lens might be best for a given application. But this high quality, inexpensive and complete collection of lenses for our Arducam cameras allows us to easily determine the appropriate lens for our various applications. The kit is ideal for experimentation on the "optical side" so as to frame up the best image for capture, processing and display.
Recommended Products
$24.99
$ 12 .99 $12.99
$1,098.99
$ 99 .00 $99.00