Your cart is empty.
Your cart is empty.Product Description
Spot-less Car Wash System
Air Dry & Spot-less
Our advanced Car Wash System is designed to give your vehicle a spotless, streak-free finish, making it look showroom-new every time. Using cutting-edge deionization technology, this system keep your water free from impurities and minerals that cause spots and streaks.
Dual Mixed Bed DI Filters
The Dual DI System effectively filters out mineral ions such as sodium, calcium, iron, copper, chloride, sulfate, and more. This results in delivering clean, spotless water through your hose, preventing scale buildup and ensuring high-purity water for the perfect wash.
Cost-Effective Solution
Our refillable filters allow you to easily replace the resin without buying a new filter or system.
*Simply check the system capacity below to ensure optimal resin use before replacement.
Easy To use
The system comes with 3/4” enclosed adapters, making connections simple and hassle-free.
*System threads are not compatible with standard 3/4" garden hose threads, so please use this enclosed adapter provided for a perfect fit.
Included
- Wrench
- Enclosed Adapters
Specifications
- Dimensions: Approx 14" Height x 9.5" Width x 5.25" Depth Weight: Approx. 10 lbs.
- Port size 3/4" NPTF
- Min-Max. Operating Pressure: 45-80PSI
- Operating Temp.: 40°F-100°F
- The system flow rate including 2 DI filters is 0.75 to 1 GPM Maximum. (System Maximum Flow Rate without filters 8 GPM.
- The best operation and recommended flow rate is 0.1 GPM to get the lowest PPM results using the misting valve.
System capacity
Correct Way to Wash Your Car Using the System
Important note for optimal performance
- Use a Pre-System for High TDS Water: If your water has a TDS level of 200 ppm or above, it's highly recommended to use this system with a pre-system. Without it, the system may only provide low ppm for about 1-3 minutes before needing a replacement.
- City Water TDS Levels: If your city water exceeds 150 ppm, this system will not achieve a low PPM reading. You should consider another system in such cases.
- Resin Lifespan: The resin has a short lifespan. Incorrect setup or application can shorten its working period. Follow instructions carefully to understand the resin's operation before investing.
- Optimal DI Water Usage: Use the misting valve to control DI water usage efficiently. Without it, you might use too much DI water, resulting in reduced the filter lifespan.
- High Flow Rate Considerations: If water passes through the resin too swiftly (fast flow), insufficient contact time for ion exchange can result in lower purity water output (resulting in a high PPM reading).
Victor
Reviewed in the United States on May 7, 2024
I liked the price for what I wanted to use it for. The unit was received fully assemble (cartridges installed). I only had to install the hose connectors and connect to the water supply. Before connecting to the water supply I tested the water and found a TDS = 64 and pH = 7.67. After connecting and running about 2 gallons through the filter, I tested the water: TDS = 50 and pH = 10.5. Tested again with similar results. Then I removed the cartridges. The media was almost completely depleted/used. See photos. I emptied the cartridges and repacked the unit in the box. to return to Amazon. I ordered a DI unit from a different manufacturer. This unit came in the manufacturer's packaging, the media was vacuum sealed and so was the cartridge holder. This unit had plastic threads to screw in the hose adaptors. The new DI unit has brass inserts. After loading the media and attaching the cartridges and hose connectors I tested the water.TDS = 0 and pH= 7.5. I was sent a USED DI unit by the Manufacturer's reseller here in the USA. Buyer beware.
Recommended Products
$39.99
$ 20 .99 $20.99