Your cart is empty.
Your cart is empty.MBP Tubeless Bicycle Rim Tape is lightweight, thin, and designed to be airtight. For use with most bicycle rims. Our tape has been tested and proved to work great under a variety of conditions. Our 10 meter roll has more tape than your average 10 yard rolls. 1 roll = adequate coverage for up to 4 29" bicycle rims once around and 2 29" rims twice around. Rims that use pressures over 45psi should use 2 layers. 1 Roll Per package. Choose your width: 1-21mm roll or 1-25mm width roll.
Captn-Dwt
Reviewed in the United States on March 11, 2021
This tape is tough, but also does not stretch. When trying to fit it down against the rim, which was not flat, the tape would not conform. Instead, there were places where the tape just insisted on having a crease. This causes leaks, and defeats the purpose. I will have to find a tape that stretches to seal my rims. I can not recommend this product for it's stated purpose.
Colin Ansel Rasor
Reviewed in the United States on December 1, 2021
Using in all my tubeless setups, works as expected.
A S. Thomas
Reviewed in the United States on April 28, 2021
Worst rim tape!! Very thin and breaks easily. Didn’t stick to the rim even after thorough cleaning. I should have returned it right away, but didn’t realize it wasn’t working because I was using a tube while waiting for new tires to arrive. Couldn’t get the new tire to seal. Had to switch to gorilla tape. For sure spend more and get better quality!!
John p correa
Reviewed in the United States on August 2, 2020
First of I have set up tubeless several times. This tape does not seal good. I tried to seal two different wheels and both did not leaked badly after thorough a cleaning and preparation. Poor product overall
Rick Bulwicz
Reviewed in the United States on March 7, 2020
A solid tape with good thickness/durability that seals well.
SZ
Reviewed in the United States on March 2, 2020
Excellent tape - flexible and strong. I've tried several brands before, and this was the easiest tape so to go tubeless.
Joe
Reviewed in the United States on January 19, 2020
Worked great on my rims. Easy to apply, took maybe 15 minutes for the whole conversion
H. Pham
Reviewed in the United States on February 26, 2019
I cleaned my rims with alcohol, then let them dry out. Next, I did a double wrap on my road bike wheels, installed a valve stem, and proof tested at 60 psi with no sealant. Next morning, tires were around 50 psi. With sealant, I should be able to get to 100 psi.
Recommended Products
