Shopping Cart

Your cart is empty.

Your cart is empty.

MECCANIXITY Wood Speaker Stands, 2 Pack 5.9 Inch (15cm) Universal Speaker Stand Hollowed Stands Enhanced Audio Listening for Home Theaters Cinema

Free shipping on orders over $29.99

$59.99

$ 30 .99 $30.99

In Stock

1.Size:19.7 Inch


About this item

  • Size: The speaker stands pair, you will receive 2* top plates measuring 9.2 inches L x 7.3 inches W (23.5cm x 18.5cm), 2* bottom bases measuring 11.8 inches x 9 inches (30cm x 23cm), 16* screws, 4* cable ties,4* zip tie mount, and 8* anti-slip pads. This complete set makes it easy to set up and start using your new speaker stands right away.
  • Hollow Design: Our 5.9" (15cm) high bookshelf speaker stands adopt the hollow design increases stability and eliminates resonance and can also be filled with dry sand to increase the load capacity. (The sound quality of sand filling and not sand filling is different, but it does not affect the use.)
  • Material: Made of durable wood material, which won't crack, can provide excellent acoustic properties, helping to enhance the sound quality of your speakers.
  • Anti-Slip Mat: The anti-slip pads on the top of the plate help to prevent the speaker from slipping and falling. Equipped with self-adhesive wire clipping, which is neatly and beautiful.
  • Easy to Install: The speaker stand install without tools, simply attach the top plate to the speaker using the included screws, attach the non-slip pads, and place the speaker stand where you want it.



Product Description

speaker stand

  • Our wooden bookshelf speaker stands are designed to provide a sturdy and stylish support system for your home theater, high-fidelity bookshelf speakers, or satellite speakers. Widely used in home, KTV, theaters, cinema, etc.

speaker stands

  • Made of durable wood material, which won't crack, can provide excellent acoustic properties, helping to enhance the sound quality of your speakers.
  • The anti-slip pads on the top of the plate help to prevent the speaker from slipping and falling. Equipped with self-adhesive wire clipping, which is neatly and beautiful.

speaker stands

  • Widely used in home, KTV, theaters, cinema, etc.
  • The speaker stand install without tools, simply attach the top plate to the speaker using the included screws, attach the non-slip pads, and place the speaker stand where you want it.

speaker stands

  • Our bookshelf speaker stands adopt the hollow design increases stability and eliminates resonance and can also be filled with dry sand to increase the load capacity. (The sound quality of sand filling and not sand filling is different, but it does not affect the use.)

Heather Cate
Reviewed in the United States on February 13, 2025
Cheap materials made of ply board, the pieces don't attach but are meant to balance on top of each other with your speakers on top. Not worth $60.
Hai Le
Reviewed in the United States on February 12, 2025
Cheap made, won’t buy again. Skin starting to peeling off already
Josh Brolin
Reviewed in Canada on January 31, 2025
Sort of annoying to build and zero instructions, but easy enough to figure out. I caulked them inside and filled with silica sand for weight. Still not very heavy but adequate and match my old speakers perfectly. I wish they had been a bit cheaper.
James P Snider
Reviewed in the United States on January 15, 2025
The manufacturer has two different wood grain patterns and different colors, what I received was not what I wanted.
James
Reviewed in the United States on September 19, 2024
Pro is good sound and gives an area between speakers somewhat and don't think my rack distorts them. I did fill them to the top with kitties litter and moved them further away from the wall because of the upper bass was too much. Also no instructions to assemble stands but the screw holes are covered and you need to run your finger over the surface to see where the holes are. One hole was not there but I just screwed my own in and there were some plastic ties and 4 feet (not 8) I don't know what to do with.
Customer
Reviewed in Canada on May 18, 2024
Well, let's see, where to start. There are no assembly instructions, you're on your own. Fortunately, it is easy enough to figure out.ALL of the screw holes are covered over with vinyl wrap. You have to determine their location and punch through.While there are pads for the speaker platform, there are no feet for the bottom platform. This is not an error, they simply are not supplied. There are holes drilled for spikes, but no spikes are supplied.The screws supplied are low-grade steel, quite soft, and so are not easy to screw down tight, and can strip easily.Once you overcome all of these obstacles and get them together, they do look good and are quite stable. Just don't expect them to be plug-and-play. Definetly not worth the money.
Chris Penkert
Reviewed in the United States on March 28, 2024
Nice size. Assembly not easy to follow.
brian mcnamara
Reviewed in Canada on February 16, 2024
Looks nice… but no instructions enclosed.Two top plates, two bottom plates and a bag of screws and clips, pads. No guide to affix plates to column. I’ve assembled lots of stands, Target, Norstone, Kanto etc… mostly intuitive but usually a guide schematic enclosed. This one nothing… do I drill the plates? I’m missing something?B
elyse ferris kuhn
Reviewed in the United States on December 30, 2024
This item was a real disappointment. The box contained 4 panels, two pieces wof wood and a bag of screws. No assembly instructions. Not worth the money.
Christopher Lewis
Reviewed in the United States on November 20, 2024
no instructions, except what was shown in description,all in all it was still easy to put together.
Recommended Products