Your cart is empty.
Your cart is empty.Helps prevent mud and debris from entering the front axle tube and use on Non-Vacuum Disconnect applications.
bob c.
Reviewed in the United States on August 13, 2023
Looks nice. Grease zirks. Perfect fit. Dana 30. 90 jeep yj.
Jaclyn
Reviewed in the United States on September 24, 2022
Super easy install used the gray RTV to hold it in place. I got 45 degree grease fitting to replace the ones that came with the kit. Just for ease of greasing in the future.
Sara Thompson
Reviewed in the United States on November 9, 2022
(Bought for a 1992 XJ): Build quality is good however, I had to modify the snap rings holding the seal in. The axle shaft at the U-Joint when seated, pressed into and bent the snap rings. I had to grind off the tabs of the snap ring to make it fit without rubbing. Additionally, the Grease fitting should be changed to a flush fitting. The current grease fitting does not give enough space to attach a grease gun unless the seal is shimmed out some.
Catherine Derry
Reviewed in the United States on January 7, 2022
I had to replace the outer axel seal on my '14 JKU-R and went with these because I liked the idea of a zerk fitting for easy greasing.I did apply a healthy amount of RTV around the insert to lock it in place, but I don't think this is necessary given it's a very tight fit that required a 2x4 persuasion to fully seat.I would recommend lining up the zerk fitting exactly where you want it before fully seating as it's very difficult to move once in place.Overall, great value for the money, looks good and so far functions very well.
tipoblanco
Reviewed in the United States on May 18, 2021
Fit my yj dana30 tubes,as stated by others with the straight zerks you cant get a grease gun on them so i put 45° zerks before installing,also i have the tj one piece axle they wont fit the cad axle,they should make a set for that application
Roger F
Reviewed in the United States on January 8, 2021
Good productThis item works as it should and is well made.I would buy again if needed.
Brian
Reviewed in the United States on August 6, 2020
Really neat idea...never really thought about all the mud packed in my axle tubes, but it really does build up! While I was doing a gear swap I put these in because I was right there, and they look cool. I'm sure they will help in the long run. I've only wheeled it a few times since I put them in, but so far so good!
Isaac
Reviewed in the United States on June 6, 2020
Product looks good, and was really easy to install. The only issue I have with the product is that when it is fully seated in the tube the grease nipple is impossible to get the attachment around to fill with grease. There are two fixes for this; the first option would be don't seat the tube seal completely into the tube just enough to get the grease gun around the nipple, the second would be to purchase separate 45-90 degree grease nipples and install those before installing the tube seal into the seal. I didn't know this before installing so I had to use a different grease gun attachment and try to fill it; it didn't work all that great but it got enough grease into it that it started to come out the seal.
Recommended Products
