Your cart is empty.
Your cart is empty.Product Description
BRAND CULTURE
We are a young team with a dream. We select products of excellent quality from millions of products to meet your needs, and hope our products can help you.
Package Includes
1Pc x Mini Gas Torch
5Pcs x Interchangeable Torch Tip
1Pc x User Manual
Package Size:21.5CM*15CM*6CM
Weight:324G
Product Description
Application : Ideal for jewelry repair and construction, handicraft, metal sculpture, glass blowing, and electronics repair and manufacturing
Specifications : Up to 6000 Fahrenheit degrees；Including 5 interchangeable tips.Made of copper and aluminum, sturdy and durable.
5 Gun Heads
Each gun head is different in size, choose to use different gun heads according to different products.
Oxygen Welding Gun
The torch has a knob to adjust the size of the gas. 2 kinds of gas are needed to work, oxygen and combustible gas, oxygen is necessary, combustible gas such as liquefied gas, gas, butane, etc. Natural gas cannot be used.
Welding Torch Joints
The 2 joints of the torch are connected to 2 kinds of gases, and they are American type joints, which can be directly connected to the response gas tank.
John Jenott
Reviewed in the United States on February 10, 2025
Works great!
Miller Wright
Reviewed in the United States on July 1, 2024
I bought this torch because I was desperate to have a little torch but wasn’t willing to pay the higher price for one from Rio or other jewlery suppliers. Horrible mistake. This torch preformed fine for a while (albeit hard to control the flame) but after a couple months of use it had some quality issues that were genuinely dangerous: the spring in the knobs are too tight so controlling the flame was very difficult for one, but the main concern is that the torch leaks from various places. The hoses aren’t machined well enough to fit onto a regulator properly AND a leak started from the top of the torch near the head which ended up causing a flame to start inside the handle. It was too hot to touch and seems as though the flame continued down the hose. Luckily I caught the issue before it could become disastrous, but it very well could have blown my tanks. On top of those other two concerns, the tips are ALSO not machined properly and on two occasions flames came out of the tip to torch connection point.Bottom line for me is that saving $130 isn’t worth the risk. I anted up for a little torch from a reputable source and I recommend doing the same. Stay safe.
Placeholder
Reviewed in the United States on November 16, 2024
This item is a cheap knockoff of a Smith Little Torch. Not only is it poorly made and assembled it is dangerous. I bought this quite a while ago, but never used it. Recently, I tried to use it, but it just didn’t seem to work properly. The flame was inconsistent, and I discovered that the oxygen regulator was faulty and leaked off all the oxygen. After I repaired the problem, I tried it again and this time the propane regulator caught on fire. I repaired that only to discover that the oxygen regulator leaked off another full tank of oxygen. I only got to use it briefly and can’t say that it worked as it should because the regulators suck. If the manufacture is at least a little bit reputable, they’ll replace this. At the very least they’ll stop selling them until they check them out and make them pass quality control because at this point they’re extremely dangerous. I have quite a bit of experience with different size torches Including small torches and this one just doesn’t measure up! Don’t buy it!!
jose a millan
Reviewed in the United States on October 10, 2024
But I have to buy some more
patbonny
Reviewed in the United States on October 1, 2024
Just what I needed
Jdarlink
Reviewed in the United States on July 3, 2023
The knobs are a little too tight making adjustments to the flame a bit difficult. I’m hoping they will loosen up in time. I may need to lubricant them somehow. Otherwise seems to work fine.
snom
Reviewed in Canada on February 14, 2023
hoses were a bit frayed where they are crimped to the fittingsthe numbers on the tips were very difficult to read and some didn't seem to have any at all.I read one person complain the fittings or connectors (not sure of right term) were too small.... this is not a design flaw, you can't connect the torch directly to any tank, all micro torches I've seen need to be attached to the appropriate regulators.
erischilde
Reviewed in Canada on November 20, 2023
I have used one of these low priced knockoffs of the smith for a while, bought some replacement heads, and this one was still disappointing.The orifices on the heads are rough, oddly shaped. Theyre thinner walled than ive had before. Where usually connections are at least brass, all is aluminum here.Seems to work at least.
Jan Wilks
Reviewed in the United States on August 30, 2022
Have had a Victor brand little torch for 30-40 years. Victor is a top quality brand for gas torches. This torch looks very similar to the Victor. Lighting this torch is identical. The weld quality of silicon bronze is at least equal to the Victor. I needed new hoses for the Victor but replacements were close to $100. So, I opted for this torch.Yes, I bought it for the hoses, but read on. I was going to remove the hoses from the new torch and put them on the Victor. I thought I would just try out the new torch, expecting a low quality product. I was surprised. It's as hot and controllable as the Victor.I was a professional sculptor for 35 years and, having owned my own bronze foundry, I have plenty of experience welding bronze, using gas and tig welders. I am retired now, and I'm presently finishing pieces from my limited editions for my children and theirs. There may be better tiny torches. I've never owned a Smith, but this torch is equal to my $200 (in 1985 dollars) torch and regulators.This is great for small work. I just finished welding fingers on a bronze hand 1/2 width. (They failed to cast during the lost-wax casting process) They are a small blob now, so I now need to carve them, but being able to make that blob a controlled blob takes some skill and a good torch. Larger pieces of bronze require more heat, so I have a standard sized Victor torch and an antique Hobart tig welder for bigger stuff (It was new when I bought it.). We have used the Victor little torch for soldering jump rings in jewelry making. This one looks to be just as good.I hope it lasts, but at this point I can't see a lot to go wrong with it. I'm very pleased. I'm keeping it.
Gamers Trading Post
Reviewed in the United States on July 8, 2021
Works good. Would have ordered other off brand that I got a yr ago for acetylene. Needed another for propane. Quality is not quite as good as the other one I got for around the same price (wasn't in my history). Anyways, would have given 5 stars if I had not ordered the other brand, for it does work great. Sorry, can't remember what the other brand was.
Recommended Products