Your cart is empty.
Your cart is empty.Product Description
Step 1
- Power off your iPhone.
- Remove the two Pentalobe screws, located at the bottom of the iPhone, next to the lightning connector.
Step 2
- Heat the bottom of the iPhone so that the adhesive softens.
Step 3
- Place a suction cup just above the home button.
- Pull the suction cup to create a small gap between the display and the rear case.
- Insert the flat end of a spudger into the gap. Slide the spudger alongside the left side of the iPhone. Twist the spudger to widen the gap.
Step 4
- Use a opening pick to free the display from the remaining adhesive that is holding the screen in place.
Step 5
- Pull the display slightly away from the rear case, to unlock the clips holding it to the rear case.
- Open the iPhone by swinging it up from the left side, like the cover of a book.
- Do not fully try to seperate the display yet! There are several connector cables connected to the logic board.
Step 6
- Remove the following tri-point (Y000) screws from the lower connector bracket.
- Label the holes and the screws. When the screws are placed in the wrong holes, it might permanently damage the iPhone.
Step 7
- Remove the metal lower connector bracket.
Step 8
- Disconnect the battery connector from its socket on the logic board. Bend the connector to make sure it doesn’t connect with the socket and providing power to the iPhone while repairing it.
- Use the point of a spudger to pry the lower display connector out of its socket.
- Use the point of a spudger to disconnect the second lower display cable.
Step 9
- Remove the three screws securing the bracket over the front panel sensor assembly connector.
Step 10
- Remove the bracket.
Step 11
- Use the point of a spudger to disconnect the front panel sensor assembly connector.
Step 12
- Remove the display assembly.
Step 13
- Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:
Step 14
- Remove the bracket.
Step 15
- Use an opening tool to pry under the left edge of the home button cable connector to disconnect it from its socket.
Step 16
- Use an opening pick to gently separate the adhesive holding the home/Touch ID sensor cable to the back side of the display panel.
Step 17
- Remove the home/Touch ID sensor assembly by lifting it through the front side of the display.
- Congratulations! You have now successfully removed your Home Button!
- To reinstall the iPhone, use the previous steps in this manual and apply them backward
Danelle
Reviewed in the United States on January 16, 2025
Received the home button and installed it. However it does not work. The fit is perfect and it looks to be installed the way the videos show. It just does not function at all.
Kimley grant
Reviewed in the United States on August 6, 2024
It’s good quality I would recommend
Gangstley Carmine
Reviewed in the United States on July 23, 2024
The screwdrivers not work just I can get out 1 screw and it broke
Guillermo
Reviewed in the United States on June 6, 2024
Waste of money, took it to get it installed by a professional, after it was installed they told me that the button wasn’t working and that it had made more damage to my phone, had to replace it.
peppohm
Reviewed in Italy on June 5, 2024
Ok
Nicholas
Reviewed in the United States on June 4, 2024
This home button is non functioning. Seller is sponsoring the product knowing full well that the buyer isn’t reading the full description. I replaced a broken button with this and got the error displayed “finger print ID could not register”. After second time of reconnecting the cable, decided to read the reviews of the product to discover it’s a decorative button. What’s the point of selling a decorative button for the same price of an actual button?This seller is preying on people not paying attention to the full description.
Henry Vanhoose
Reviewed in the United States on April 30, 2024
Had to set up roaming home button
Kdd
Reviewed in France on August 9, 2023
Des fois ça marche des fois pas
Brent Porter
Reviewed in the United States on June 8, 2023
Thanks again
António Martins
Reviewed in Spain on June 22, 2023
Envio rápido e de acordo com a descrição.
Matt
Reviewed in the United States on February 21, 2023
I couldn’t get it to work, and when I put it on the screen went black and never came back on. Not sure if that was the buttons fault or the screen.
Oskar Bergqvist
Reviewed in Sweden on February 2, 2022
Totalt värdelös. Knappen ser jätte bra ut osv, men fungerar inte .Menar inte att inte Touch ID fungerar för de visste jag vid beställning, men som många andra skrivit så fungerar inte knappen över huvudtaget.Så köp ej denna produkt .
Diogo Pires
Reviewed in the Netherlands on October 15, 2022
I think it's wrong to deceive people
Recommended Products