Your cart is empty.
Your cart is empty.Molded to the contours of your Ram truck for a perfect fit. These guards help protect the lower body side panels from damage caused by gravel, salt and road debris. Deluxe Molded Splash Guards provide excellent lower body protection and accent the vehicle styling. They are molded to the contours of the vehicle for a custom fit and feature vehicle logo depending on vehicle application. Sold in sets of two
Very good
Reviewed in the United States on March 24, 2025
Good
Rafael Montero
Reviewed in the United States on March 23, 2025
Este artículo lo devolví no era compatible
Peter Gibbons
Reviewed in the United States on August 25, 2024
As long as you have an 8mm socket/ratchet, drill with a 1/4" bit and four 1/4 inch press in tabs it is easy. I did not use the rivet type in the box since it requires a special tool. Be sure to clear the plastic shavings from each hole needing to be drilled.I used Woodzdon 30pcs Front Fender Mud Skirt Clip Fender Liner Retainer for GM 14019205 14019206 for Chrysler 34201621 Push Type Pin Plastic Fastener Car Body Bumper Fascia Blind Rivet Fit into 1/4 inch Hole instead of the rivits in the box.
Mike B.
Reviewed in the United States on August 25, 2024
Great quality and fit. They look great.
Customer
Reviewed in the United States on February 8, 2024
I really like the overall length of these splash guards - not too long or too short. They fit perfectly without protruding from the side like some others. I have a 2023 RAM 1500 Limited and they look great. They were a bit more money than some others online, but the fact they are Mopar (OEM) and fit as good as they do makes it well worth it. Note that the product comes with one plastic 1/4" rivet per guard so you need to buy that small one-handed rivet gun that Harbor Freight has for $15.
John C
Reviewed in the United States on January 5, 2023
Installed very easy. Only took an 8mm socket, and a 1/4 drill bit. Like others have said, buy some 1/4" plastic push in type fasteners from the autoparts store. The plastic rivets that come with them need a special tool for install. Other reviews mention that the back set did not have the Styrofoam inserts, but I can say that both front and back had them in mine. Maybe it was an upgrade or something. All around good product that fit very well, and were shipped quickly.
edwin
Reviewed in Canada on July 29, 2022
Perfect fit on my 2022 Ram Rebel..
allen babauta
Reviewed in the United States on August 18, 2020
Bought this Official Mopar product for the new model 2019-2020 Ram 1500 not the classic. Fits perfect with the truck with a natural look. Blocks the majority of dirt and grime from the roads, but not all of it. A huge improvement compared to not having any flaps. You must drill a few holes so beware of that. This product does require rivets and highly recommend getting a rivet gun. I installed one without the rivet gun which turned out to be difficult. Went to buy a cheap rivet gun to finish the rest and it made life incredibly easy. A rivet remover is also incredibly helpful.
JDZ
Reviewed in the United States on February 13, 2020
I'm really torn about how to evaluate these splashguards. I have only had them on my truck (2020 RAM Rebel) for a few weeks now so I can only comment on what I have observed to this point. In my opinion, these are by far the best looking splashguards for this truck. They fit against the fender flares perfectly. They also do a great job at minimizing the spray coming off of the tires, especially the aggressive tires on the Rebel. This was my primary purpose behind adding them, since I was getting terrible spray down the sides of the truck (which is white). The installation is extremely easy, and it took me maybe 15 minutes to do both front wheels. I did not need to remove the tires, just turn full lock to one side or the other. I used the plastic rivets as directed in the instructions. The negative is the open section of the splashguards towards the center of the truck. The splashguards are hollow and the portion closest to the center of the truck is fully exposed for debris build-up. I'm completely blown away that they would design something that fits as well as it does to the outer surfaces but yet leave such a glaring issue on the inside. There is a small drain slit in the center, but I enlarged the slit to allow for additional material to escape. I anticipate having to clean this section out. I may end up cutting the inner edge off of the guards to eliminate the pocket. If it weren't for this pocket, I would have easily rated these a 5 star product.
Recommended Products
