Your cart is empty.
Your cart is empty.Product Description
Engine Guard for Harley-Davidson Touring Street Glide Road Glide Road King Electra/Ultra Models (2014-2023)
- Fitment list:
- 2014-2022 FLHP; 2014-2019 FLHR; 2014-2019 FLHRC; 2017-2022 FLHRXS; 2019-2022 FLHT; 2015-2019 FLHTCU; 2015-2016 FLHTCUL; 2014-2022 FLHTP; 2014-2022 FLHX; 2014-2022 FLHXS; 2018-2022 FLHXSE; 2022 FLHXST; 2015-2022 FLTRX; 2015-2022 FLTRXS; 2015-2022 FLTRXSE; 2022 FLTRXST
Fits 2009-2024 touring model Harley Davidson motorcycles (Street Glide, Road Glide, Road King, Electra/Ultra).
- Fitment list:
- 2009-2022 FLHP; 2009-2013 FLHR; 2014-2019 FLHR; 2014-2019 FLHRC; 2017-2022 FLHRXS; 2019-2022 FLHT; 2009-2014 FLHT/C/CU/K; 2015-2019 FLHTCU; 2015-2016 FLHTCUL; 2009-2022 FLHTP; 2009-2013 FLHX; 2014-2022 FLHX; 2014-2022 FLHXS; 2018-2022 FLHXSE; 2022 FLHXST; 2009 FLTR; 2011-2013 FLTRU;2010-2013 FLTRX; 2015-2022 FLTRX; 2015-2022 FLTRXS; 2015-2022 FLTRXSE; 2022 FLTRXST
- Built to endure various weather conditions and road terrains, this engine guard remains a reliable companion, reinforcing your bike's longevity and performance.
- There is a replacement slider at both ends of the anti-collision bar.
- When the end of the collision bar are damaged,riders don’t need to replace the whole anti-collision bar.
- Simple installation process ensures a hassle-free setup. Its secure attachment mechanism ensures stability during rides, offering peace of mind on every journey
Customer
Reviewed in the United States on July 25, 2024
The right side bolted right up. Cut the existing bracket so it extends into the new bracket as much as possible. The left side does not bolt up correctly. The left shock dial has to piggy back onto the new bracket and it does not want to fit. On top of that, the bars do not align correctly to bolt in easily. I had to “adjust” the geometry of the brackets with a long 2x4 to get them to bolt into all the holes. If you do not get them aligned correctly, the bags won’t sit in the groove correctly, and the bags won’t close and latch properly, so make sure the alignment is correct.On top of all that, they do not come with the 2 bolts that go under the seat into the frame. So hopefully you have some spare Harley bolts laying around, or off to Ace Hardware you go.And an added bonus, if you order the fancy knobs to finish it off, make sure you order 2 sets, because they only come in pairs. So all in all, you could have bought the Harley set for a few bucks more, and avoided all the cutting, missing bolts and bending and shaping for them to fit. Other than that, they are great.
Taylor C
Reviewed in the United States on July 22, 2024
The welds and powdercoat well exceeded my expectations, they were really simple to install. You just need something to cut the saddlebag supports and basic hand tools, they look fairly durable and I intend to find out 🤘🏻
chris
Reviewed in the United States on July 22, 2024
Great alternative to the higher priced options. Was really hoping to use this as both a guard and highway pegs but it’s too narrow for that unlike what other people claimed. I was able to fabricate my own extension to replace the tips but it’s too narrow if you were hoping to go that route. Fit and finish is acceptable at this price range.
Luke Ward
Reviewed in the United States on July 1, 2024
You need a 25 torx bit 10 mm Allen and 9/16 wrench and a cut off wheel or a grinder with a thin disc.Remove bag and side cover.Hold up crash bar to find the place to cut give yourself four or five inches.Cut while the piece is still on the bike.Remove top and bottom torx bits bottom one needs 9/16 wrench also.Install ,,, repeat on the other side.That's it, tool me about 20 minutes for the whole job start to finish.
Joe. Michigan
Reviewed in the United States on June 24, 2024
30 minute install. Less expensive than others. Construction seems good. We will see after a season of riding. Added perk: because it bends back towards the rider, doubles as highway pegs.
M.G.
Reviewed in the United States on December 1, 2024
Brake side went on easily. Clutch side holes didn't line up very well. Had to pull on it pretty good to get the bolt in. You do have to cut your support bar under your bags. I cut mine right at the bend as soon as it goes straight and that slides into the end of this bar. Build quality appears to be pretty good. I will probably powder coat mine after the paint starts to look bad.
CORBY
Reviewed in the United States on November 3, 2024
Love these looks great
Mark C.
Reviewed in the United States on October 30, 2024
These screwed onto the crash bars fine and help keeping my boots on the bars when I need to stretch out.
Recommended Products
$99.98
$ 38 .99 $38.99