Your cart is empty.
Your cart is empty. Fitment:
Fits Walbro carburetors models:
WG-6, WG-7, WG-8, WG-9, WG-10,WG-12
Some Gaskets are same as K10-SDS
Packaging List:
1 Set K12-WG Repair kit as picture shown
Customer
Reviewed in Canada on March 9, 2025
Worked perfect for my Walbro WJ39 and WJ71 carbs
Customer
Reviewed in the United States on May 15, 2024
I used this product on an Echo chain saw, and everything worked well.
Jerry in Carolina
Reviewed in the United States on March 21, 2024
Got my saw running again.
Dev
Reviewed in Canada on October 25, 2024
I was late getting back to working on the chain turns out the diaphragm was all wrong. To late to return.
dennis
Reviewed in the United States on June 22, 2023
QUICK DELIVERY
Johann
Reviewed in Germany on May 21, 2022
Bin Sehr zu frieden
Dan Dimov
Reviewed in the United States on May 11, 2022
They are as good as the original Walbro kit
Corrine Martin
Reviewed in the United States on January 26, 2022
Gaskets are thinner than Walbro, plugs do not fit the holes properly, no spring included and loose fit of parts. If you want an inferior carb kit, this is the one for you!!
Anton Wachter
Reviewed in Germany on March 28, 2021
Schnelle Lieferung, alles passgenau
Shelly Hugo
Reviewed in the United States on December 18, 2019
Used to fix my four wheeler. Needs two more gaskets added to the kit but I was able to make them and now it runs great.
scott
Reviewed in the United States on October 28, 2018
Bought this thinking it was a great value, but this kit does not contain OEM Walbro parts and the parts in the kit appear to be lesser quality. Did not end up installing the kit on my carb (fortunately I had an OEM Walbro kit on hand too) so I can't say whether or not it actually works or will last. The metering spring included in the kit is about 1/2 the length of Walbro springs (although to be fair, I did not test the pop-off pressure of the spring from this kit) and the pump diaphragm appears to be a different material, although the teflon pump diaphragm appears to be similar to the Walbro teflon diaphragm. Also, if it's important to anyone, the metering diaphragm is the tang-type instead of the button-type. Just requires setting the ML height differently, but I've never seen the tang before.
Recommended Products
