Your cart is empty.
Your cart is empty.Rick
Reviewed in the United States on September 5, 2024
It's thinner than what was in there originally and it didn't stop the leak. I'm not saying it's bad quality wise, just didn't fix the issue. If you have a leak around the base then it might help. Ended up being the screw on the top that was leaking anyways. Instead of ordering 5 new light covers I just bought some "Flowable silicone" made for windshields and glass sealing and covered the top of the screw with a big dollop and it fixed the leak. Good luck!
cartergray
Reviewed in the United States on September 30, 2024
2015 Ford Cab light was leaking & this corrected the problem
Mark Taynton
Reviewed in the United States on August 29, 2024
Ordered these when we were repainting my 2002 F350. Fit right in and were shipped quickly.
SMD
Reviewed in the United States on October 22, 2024
The bottom gasket is a totally different shape than the OEM 2007 gaskets. This one pushes the front and rear edges up off the roof. Since it has a big cutout in the middle you can't even trim it to the correct shape.As other reviews state, the top gasket is also way too thin.
jeff goehl
Reviewed in the United States on March 29, 2023
Fit great !!!
Ted
Reviewed in the United States on March 10, 2023
My right-side marker lamp was leaking. installed, no more leaking.
HEYWOOD
Reviewed in the United States on September 24, 2021
Took a chance on these but I should have heeded the advice of other reviewers. The lower gaskets work fine and make a good seal to the roof of the truck but the upper gaskets are far too thin & basically worthless. All 5 marker lights leaked into the lense cover as opposed to the 1 that leaked previously with 20 year old OEM gaskets.
Arthur Wheatley
Reviewed in the United States on February 9, 2021
I bought these because my clearance lights where leaking on my F250 Super duty, I thought that I was going to have to pull the headliner out and remove the lights to replace the gaskets but the lights where leaking from the leans side so all I had to do was pull the lens, remove the old gasket, clean the lens area and install the new gaskets.Excellent!
Recommended Products
