Your cart is empty.
Your cart is empty.Product Description
MK1001179
About NICHE
NICHE provides Powersports replacement parts. Some of the NICHE product categories include cylinders, brake pads, axles, off-road mirrors, and drive chains. NICHE parts are here for when you need them the most.
NICHE Cylinder Head Piston Gasket Carburetor Kit Part Number MK1001179
- Includes: NICHE Cylinder Head Piston Gasket Carburetor Kit
- Compatible with the following brands: Yamaha
- Compatible with the following models: Blaster 200
- Replaces for the following OEM MPN's: 2XJ-11311-02-00
- Placement on Vehicle: Front
- Cylinder Bore: 66mm
- Cylinder Stroke: 57mm
- Cylinder Displacement: 195cc Displacement
- Main Jet Installed: 110; Main Jet Spares: None
- Pilot Jet Installed: 40; Pilot Jet Spares: None
- Input Port 28mm(ID), 35mm(OD)
- Output Port 40mm(ID), 43mm(OD)
NICHE CYLINDER
- ATV engines come with either one or two cylinders
- Displacements typically measuring between 100cc and 800cc
- It's important to note that safely riding an ATV requires a certain amount of body weight and physical strength
- Disaster can strike, for example, when a young rider uses an overpowered or a larger ATV
NICHE PISTON
An ATV piston is a component of engines, pumps, and gas compressors. It is located in a cylinder and is made gas-tight by piston rings. In an engine, its purpose is to transfer force from expanding gas in the cylinder to the crankshaft through a piston rod and or connecting rod
Piston Anatomy
A piston is a cylindrical engine component that slides back and forth in the cylinder bore by forces produced during the combustion process. The piston acts as a movable end of the combustion chamber. The stationary end of the combustion chamber is the cylinder head.
Piston Components
ATV Piston components include the piston head, piston pin bore, piston pin, skirt, ring grooves, ring lands, and piston rings. The piston head is the top surface of the piston which is subjected to tremendous forces and heat during normal engine operation
NICHE CARBURETOR
ATV Carburetors:
Most ATV carburetors use a simple design. They have a vertical air pipe that’s strategically located above the engine cylinders. The vertical air pipe is then joined to a horizontal fuel pipe (at the narrowest part of the venturi) which allows for the passage of air into the engine’s inlet manifold. The inlet manifold, also called the intake manifold, is part of the engine that supplies the air/fuel mixture to the cylinders
Motorcycle Carburetors:
Regulate the flow of air through their Main bore (Venturi), this flowing air draws in fuel and the mixture enters the engine via the intake valve.Turning the throttle on a motorcycle handlebar does not directly control how much fuel enters the engine. The throttle controls how much air is allowed to flow through the carburetor, and the flow of air is what controls how much fuel is also fed into the engine
NICHE GASKET
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.
Some Types of Gaskets:
- Head gaskets create a seal between the engine block and cylinder head. This seal establishes a proper compression and prevents fluid leaks into the cylinders
- Base gaskets create a seal between the top-end of your engine and the engine cases. Stop pesky engine oil leaks before they cause permanent damage to your engine.
- The valve cover is sealed to the upper section of the engine cylinder head by a valve cover gasket. As it passes around the camshafts, rockers, and valves, the gasket stops engine oil from seeping out.
Dennis
Reviewed in the United States on December 16, 2024
Head doesn't line up with cylinder studs you just drill the head holes bigger and it works
Julie Hoffman-Camp
Reviewed in the United States on May 9, 2022
I used this kit for my 1997 yamaha blaster and the castings didn’t fit correctly. I tried everything but no luck and had to return the item
JACOB
Reviewed in the United States on January 8, 2021
Good price and work awesomeIm happy easy installation
Autumn
Reviewed in the United States on January 23, 2021
Great value for the price
Latausha I
Reviewed in the United States on January 20, 2021
Fit great 😊
James Edens
Reviewed in the United States on December 28, 2020
Havnt rebuilt my 4wheeler yet but uave full intentions of it this winter fast easy shipping.
jamie j.
Reviewed in the United States on June 15, 2019
Ummmmmm so the gaskets were good that was about it the castings were wack and the head didnt line up with the cylinder looks to be nice and all but not worth the money i would reccommend a hotrod or vitos or wiseco dont wastw time or money
Tony hinton
Reviewed in the United States on May 16, 2019
Worth it
Recommended Products