Shopping Cart

Your cart is empty.

Your cart is empty.

Non-Skid Paint Additive - Quart for 5 gallons - COARSE Anti-Slip Particles Fas-Grip

Free shipping on orders over $29.99

$17.99

$ 8 .99 $8.99

In Stock

About this item

  • Works Great for 2-Part Epoxy, Urethane, Gelcoats, and Enamels
  • Unique Polymer Absorbs the paint so it stays the same color as it wears
  • Floors, Stairs, Decks, Walkways, Factories, Inclines, Boat Decks, and Docks
  • Produces a Slip-Resistant Floor
  • Coarse, good for gelcoat.


FAS-GRIP is a unique polymer texturing agent designed for use in most coatings. Available in coarse and fine grades FAS-GRIP will stir easily into most coatings with minimal effect on the coating viscosity. The low density of FAS-GRIP allows it to stay suspended in the coating rather than sinking like sand type additives. This allows for a more even application with less mixng. Due to it’s spherical shape, FAS-GRIP is not highly abrasive, and is easy to clean due to its lack of sharp edges. Method #1: For spray brush or roll application, add 10oz of FAS-GRIP non skid particles to 1 gallon of coating.Apply by syphon gun or a pressure pot with agitator. When texture is achieved, apply a sealer coat. Method #2: Apply a tack coat to the non-skid area and then broadcast the FAS-GRIP particles (via a perforated shaker apparatus) to the wet area. Allow to tack up, blow off excess particles and then apply a final coat.


Michelle P.
Reviewed in the United States on October 31, 2023
I used this to mix into 5 gallons of concrete sealant for my pool deck. Worked exactly as advertised for way less money than the other brands. Will totally buy again.
Chowder Guthrie
Reviewed in the United States on June 4, 2022
I use this again works very well good non skid lays out well an can be rolled out
John W.
Reviewed in the United States on November 15, 2021
Great nonslip finish on cement.
Prada
Reviewed in the United States on August 31, 2020
Nice product
lindsey cotterell
Reviewed in the United States on August 12, 2020
This additive works great! We have a very steep driveway with exposed aggregate. I put it in a Brown stain and we rolled it on. Couldn't be better. Price was great
Sandy Gardener
Reviewed in the United States on November 18, 2020
Contacted manufacturer and they recommend about 10 ounces or more by WEIGHT per gallon. There's not a lot more than that in the quart jar. I just added all the particles to one gallon of epoxy and it worked out perfectly.
KLYNC
Reviewed in the United States on April 16, 2019
Works well