Your cart is empty.
Your cart is empty.Product Description
Oatey? Master Flash? Roof Flashings are designed for use with profiled roofing materials and can be installed on every type of roofing surface. The base is designed to form a seal on any panel configuration and roof pitch, regardless of pipe location. Master Flash is pliable so it won't crack or break. It accommodates vibration, pipe movement caused by expansion and contraction, and snow-load movemnet. Master flash is made of EPDM and compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.
From the Manufacturer
Oatey products can be found in residential and commercial applications and have achieved excellent brand name recognition with consumers. All products are backed with the highest quality technical and customer support programs in the industry
Lucas Lutz
Reviewed in Canada on June 12, 2022
Waste of money. It melted!
William Sloan
Reviewed in the United States on September 29, 2021
Felt good on the pipe I wanted to use it on was easy to install and sealed well
Kathy
Reviewed in the United States on May 28, 2021
Works great
Customer
Reviewed in Canada on February 13, 2021
Can you use this on a tent stove pipe? Does it with stand high temps?
Virginia W.
Reviewed in Canada on November 21, 2021
It says: Oatey 14053 2.75 in. – 7 in. but if you zoom into the picture - or as we did - ordered it you will find out it is only up to 6 inches! With an open roof and no chimney in the middle of November I want and go to vomit!
Robert G.
Reviewed in Canada on December 16, 2020
good product worth every penny
Melanie
Reviewed in Canada on November 23, 2020
Got this for my ice shack, and worked perfect. My only complaint is that for a 6inch pipe you end up having to screw too close to the chimney. As a result the screws don't hit any rafters, so additional sealing is required.
Customer
Reviewed in the United States on February 5, 2019
Used on my RV and has been great , Been four months and sealed great !
KEVIN J. maint.
Reviewed in the United States on December 9, 2019
worked perfect!
Bylyun
Reviewed in the United States on December 11, 2019
Quality @ reasonable price
Zack
Reviewed in the United States on January 26, 2019
This thing has withstood constant abuse of 2- 800 degree Fahrenheit screen prints dryers, 3 Hurricanes, & 2 years of exposure of North Carolina Sun. No Leaks, Easy to Install. If you're looking for one of these, you can't go wrong. Rubber work around the metal flange was sloppy and I had trim.... But I'm just picky on my installs.
lahills
Reviewed in the United States on September 11, 2016
I used this to seal the range hood vent pipe i cut through my roof. It was very easy to install. I used a utility knife to size it. It took some effort to slide it down the pipe. Maybe some soapy water next time would help it slide easier. I applied the sealant to the roof. I used silicone and screwed it down to the roof with some flat head wood screws I had sitting around. The instructions recommend using hexagon screw heads. I used it for a 6 inch pipe and i used the leftover piece that I cut off to seal a 3" vent pipe that was showing some cracks that i noticed when when i was up on the roof. Highly recommend! I only wish i knew about this earlier because I would have used it for my drain vent on my spanish tile roof
EJ
Reviewed in the United States on April 8, 2013
I have a 6 inch vent pipe over the kitchen stove. The old flashing and seal was was worn out and needed replace. I used this. It's base is not as wide as the old one, so I had to put more flashing under it (I used the roll of aluminum+tar from HD).It does what it's supposed to do. The base is also very flexible, which you may or may not like.
Recommended Products
$22.91
$ 11 .99 $11.99