Your cart is empty.
Your cart is empty.Product Description
Oil analysis Sampling pump
For any mechanical equipment, lubrication system is so essential, which is usually regarded as the “blood” of machine. Lubrication oil taken from machine is similar to blood taken from human body, which contains much information about the condition of the equipment. To take oil sample efficiently and properly, a wonderful oil sampling pump kit is very necessary.
oil analysis kit
1. Remove the cover of the sampling bottle and connect with the sampler at its threaded end.
2. Loosen the large silver white screw on the top of the sampler and insert the sampler through the middle hole of the screw until its end aligned with the thread of the bottle (Do not insert too deep as the oil may be pumped into the sampler as the pipe is submerged in the oil.)
3. Tighten the large screw on the top of the Sample Collector
4. Insert the pipe end which is outside into the sample.
5. Pull and push the handle at the end of the sample to pump the oil into the sampling bottle until the liquid level reaches 3/4 of the bottle volume.
6. Remove the sampling bottle, cover it and stick a label on it (The label should contain sampling time, oil sample No., oil sample name, equipment, using time and operator).
7. Pull out the sampling tube and clean the Sample Collector
sampling tube
sampling tube (without bottle and hose. If you need sampling bottle and tube, please order separately in our shop.）
oil analysis sampling pump application
It can be equipped with various oil pollution sampling, particle detection sampling, cleanliness analysis sampling, oil monitoring sampling, oil analysis sampling, and conventional sampling
oil analysis sampling pump application
For any mechanical equipment, lubrication system is so essential, which is usually regarded as the “blood” of machine. Lubrication oil taken from machine is similar to blood taken from human body, which contains much information about the condition of the equipment. To take oil sample efficiently and properly, a wonderful oil sampling pump kit is very necessary.
Company
Luzmarygz
Reviewed in the United States on June 20, 2024
Me agrada la prontitud del envío y el producto es de buena calidad.
Zachariah Maldonado
Reviewed in the United States on June 1, 2024
No longer shall I have to wait for the entire battalion to use the one vacuum pump on AOE sample day. It's the exact same one we get issued in the motorpool.
Rick
Reviewed in the United States on May 6, 2024
It works, what else can I say?
Mark Cooper
Reviewed in the United States on October 20, 2024
2’ piece of 3/16 tubing will reach oil through the dipstick tube and the Blackstone sample bottle fits perfect. Perfect setup for easy and fast collection of oil samples.
Sullynxs
Reviewed in the United States on August 30, 2023
Works like a charm.
Jason
Reviewed in the United States on December 29, 2023
Quick, simple and reliable. Enough said
Captain Cook
Reviewed in the United States on December 13, 2023
This was recommended to me by a sailor who uses it to remove the engine oil from his inboard diesel, which is what I have too. I needed more capacity than a small sample bottle and it turns out that the threads on a four liter wine bottle match the threads on the pump. 5/16 PEX tubing fits the pump and is the size that easily fits the dipstick tube in the engine. This setup works so well, not messy and very effective. This is also good for pumping out the residual water in the bilge not removed by the bilge pump. This pump is a jewel!
C. W.
Reviewed in the United States on January 16, 2022
I was surprised how easy it was to use. No mess or fuss, much better than trying to catch a sample flowing from drain plug.
Recommended Products