PicoScope 2207B MSO 70 MHz 2+16 Channel Mixed Signal Oscilloscope

2ch+16ch(MSO), 70MHz, with FG/AWG
The PicoScope 2000 series is a low-cost USB oscilloscope that is ideal for educational experiments, field service and hobby use. The PicoScope 2000 Series Analog CH is available in 2ch and 4ch models and includes all model functions/waveform generators. The MSO model is also equipped with 16ch digital input, which allows you to simultaneously analyze low speed serial bus measurement as shown later.
The 2207B MSO is compact yet the waveform update rate is fast and has over 80,000 waveforms per second due to hardware accessories.
Each model of PicoScope operates with common software, it automatically identifies each model of USB connected to the PC and switches to a corresponding screen display, the display is flexible for your PC display size.
1-Wire, ARINC 429, CAN&CAN-FD, DCC, DMX512, Ethernet 10Base-T and 100Base-TX, FlexRay, I²C, I²S, LIN, PS/2, MODBUS, SENT, SPI, UART -232 / RS-422 / RS-485) with standard software. Decodes cordata. Support analysis.
FFT analysis is also standard equipped, the spectrum view plotting amplitude to frequencies and is ideal for detecting signal noise, crosstalk or distortion.
The large viewing area allows you to create a split screen display for multiple screen displays, for example, you can display multiple channels or different displays of the same signal at the same time, or display multiple oscilloscopes and spectrum analyzers traces at once, and you can also display individual zoom, pan-waveform of each waveform.
The musclimit test function can be comparison with the known good signal, it can take a known good signal and draw a mask around it, and then it can pass / dispass test signal compared to that mask.
Equipped with a signal generator function, the general functions (sine wave, square wave, triangular wave, DC) can output 1 MHz and 2 Vp-p.
You can also use the built-in AWG editor for any waveform generator (AWG) for 12-bit or 20MS/s to create and edit various waveform output.
Main Specifications
Frequency Bands, Number of Ch, Number of Logics: 70 MHz, 2 ch, 16 digital ch
Analog Input Type: BNC
Vertical Axis Range: 20mV/div-20V/div
Maximum Input Voltage: ±100V
Input Impedance: 1 MΩ±1%, 16 pF±1 pF
Standing Time: 5ns
Horizontal Axis Range: 1ns/div-5000s/div
Resolution and Maximum Sample Rate: 8 bit: 1 GS/s at 1 ch analog, 2 ch analog or 1 ch analog and 500 MS/s at 1 logic or 1 logic or 2 logic, and 250 MS/s at ch
Memory Length: 13.2 ft (64 m)
Trigger Type: Edge, Pulse Width, Time Delay, Logic, Window, Dropout.
Display interpretation: Linear or sin (x)/x
【Automatic measurement】Scope: AC RMS,True RMS,DC average,cycling,frequency,duty cycle,rise time,rise rate, rise rate,high pulse width,low pulse width,max,min,peak to peak, spectrum:peak frequency,peak amplification,peak average frequency,total power,THD%,THD dB,THD +N, SIN. AD, SNR, IMD Statistics: Min, Max, Average, Standard Deviation
Automatic calculation: FFT, quadratic operation, reverse, square root, exponential, logarithmetic, absolute value, triangular function, fraction, integration.
Serial Decode Support: 1-Wire, ARINC429, CAN&CANFD, DCC, DMX512, Ethernet-10base T and 100base-TX, FlexRay, I2C, I2S, LIN, PS/2, MODBUS, SENT, SPI, UART (RS-232/RS-422, RS-485), USB1. .1
[Function Generator Standard Waveform] Sine wave, square wave, triangular wave, DC voltage, lamp, sinc, gaussian, half-sine, white noise, PRBS
[Function generator output voltage, frequency] ±2V, 1MHz
[Optional waveform AWG function sampling speed, resolution, memory] 20 MS/s, 12 bit, 32 k
Power Supply: USB port bus power.
Dimensions and Weight: 5.1 inches (130 mm) x 4.1 inches (104 mm) x 0.7 inches (18.8 mm), approx. 0.4 lbs (0.2 kg).
Accessories: Probe for a few minutes, USB cable.
[4 year warranty] Main unit