Shopping Cart

Your cart is empty.

Your cart is empty.

Pneumatic Rivet Nut Gun with 10-24 & 1/4 & 5/16 & 3/8 Self-Locking Head, Adjustable Speed Air Rivet Gun, Air Rivet Nut Tool Kit with 4 Size Quick-Change, 6pcs Mandrels Included with Each Size

Free shipping on orders over $29.99

$129.99

$ 60 .99 $60.99

In Stock
  • SELF-LOCKING GUN HEAD: Rivet nut tool comes with 10-24 & 1/4 & 5/16 & 3/8 gun heads as well as their 1 bearing & 6 mandrels of each size. The head has a self-locking function that allows you to quickly assemble and disassemble the mandrels for increased efficiency
  • STURDY & TIME-PROOF: The bearing, mandrel, and connecting rod are all made of high hardness alloy steel make the rivet nut gun more wear-resistant. We have added Industrial lubricants to the gun heads to make the service life of the rivet gun longer
  • POWERFUL FUNCTION: The muffler vent is embedded in the pneumatic rivet gun to reduce the noise generated during operation. The air rivet gun with a speed regulating knob to adjust the size of the gas and effectively cope with various working conditions
  • ERGONOMIC DESIGN: Non-slip handle suitable for human hand holding posture, shock-proof design makes the use of the rivet nut gun more comfortable and reduces the fatigue caused by long-term use
  • NOTE: The mandrel is a consumable item, and bearings and industrial lubricants can extend its life. We also provide 6 mandrels for each gun head so you can use it longer. Quality issue or any questions, please come to us. We would work out a satisfactory solution to your problems



Product Description

Clatoon Industrial Grade Pneumatic Rivet Nut Gun

pneumatic rivet nut gun

  • Air rivet nut tool kit use an air power source to provide fast, stable and reliable work, get the job done with less effort, and save you valuable time.
  • Its compact size and lightweight design make it easy to store.
  • Widely used in industrial fastening, metal sheet, cabinet, automobile manufacturing, decoration, etc.
  • If you are looking for an efficient, versatile rivet kit for all your rivet needs, a rivet nut gun is the choice.
Air Rivet Nut Tool Kit

The pneumatic rivet gun is made of high hardness alloy steel for durability.

Self-locking head design, easy to operate.

1. Pull the snap ring

2. Remove the nut head

3. Installation the connecting rod

4. The original steps with the new nut head

Feature

  • Model: PRG-01
  • Applicable gun head: 10-24, 1/4, 5/16, 3/8
  • Power: Air-powered
  • Air pressure: 60-80PSI
  • No-load speed: 400RPM
  • Air intake: 1/4 inch
  • Net weight: 3.1 lb

pneumatic rivet gun

Key switch

Button operation, simple and safe

rivet gun

Air Inlet Speed Adjusting Knob

Select the appropriate working speed for you by adjusting the air inlet speed adjusting knob.

rivet nut tool

Embedded Muffler Vent

The Embedded Muffler Vent can effectively reduce the noise while you work and protects the eardrum of the operator.

Precautions for use

  • For safety, make sure the air source is turned off during installation.

  • After the installation is complete, test whether the air pressure and tools are normal before starting the formal operation.

  • In order to achieve the appropriate air pressure setting, it is advisable to do some test pulls on scrap material. Start with a low pressure setting and gradually increase to find the optimal air pressure. When the air pressure is set too high you risk stripping the thread on the insert.

  • Do not directly touch the rotating shaft to avoid injury to your hands or other parts of the body by tools. Wear gloves to protect your hands during operation.

  • When not in use, changing tool accessories or performing maintenance, please turn off the air source and disconnect the tool from the air source connector.
rivet nut gun kit

Note

  • As the frequency of product use increases, the mandrel will wear, please replace the mandrel regularly to ensure that the product can be used normally.

  • Regular application of industrial lubricant can reduce wear on the mandrel.

  • Foreign matter such as moisture and dust in compressed air is the main cause of premature aging of tool parts. Therefore, it is recommended to install a filter to filter the compressed air and provide clean and dry gas for the tool.

  • Before you use it every day, drop 2-3 drops of pneumatic maintenance oil from the air intake into the drawgun, then idling the machine for about 30 seconds. If it is not used for a long time, it also needs to be maintained in this way.

chris turbeville
Reviewed in the United States on July 26, 2024
I broke mine out today to mount a led light to my boat and when i went to put a 10-24 rivet in it broke the screw tightening the rivet up had to drill it back out and do it again. It also broke the 1/4 in bolt also i am going to go get harder bolts to see if it helps works good beside this problem.
Mark Luehmann
Reviewed in the United States on July 26, 2024
No replacement parts. The 1/4” gun head got damaged because I had to saw the screw off to free the gun when it got stuck into the rivnut. This happened twice, after 20 rivnuts I put in. Very disappointing.
Rick
Reviewed in the United States on February 15, 2024
Was worth every penny
Hurco1973
Reviewed in the United States on November 4, 2024
This tool will not work for production quantities.Would not capture 3/8-16 inserts for stainless appliances.Switched to 1/4-20 inserts and it stripped the threads and could not remove from an expensive part. Had to razor wheel the collet off and lost the nut in the frame. Spend the money on a more reliable tool
Mantou
Reviewed in the United States on April 6, 2024
This is a pneumatic riveting gun with a tons of self-locking head, with 6 pcs mandrels included. The RPM speed is adjustable which makes it fits various of materials and circumstances. Very handy and useful riveting tool.
Mike Hartmann
Reviewed in the United States on April 28, 2024
We used it versus a $1000 Rivnut setter and it ran circles around the other one. Just keep it oiled, and the screw oiled and your fine.
John S.
Reviewed in the United States on December 18, 2023
High quality at a very good price!
Jimmy
Reviewed in the United States on November 1, 2023
Everything about this tool has gone way beyond my expectations. It is an extremely well designed and manufactured piece and there are many 'extras' included with this pneumatic rivnut tool.I use rivnuts almost every day and what I wanted was a tool that would set each rivnut exactly, identically the same every time. By manufacturing the rivnut setting tool in a pneumatic version Clatoon has not only addressed the consistency issue, they have also made a tool that makes inserting rivnuts so much easier.The tool comes with all of the necessary anvils and drives to install 10-24, 1/4-20, 5/16-18, and 3/8-16 threaded inserts. The brunt of the work is handled by simple, allen head screws. If, during rivnut installation, you apply too much torque, the screw will break. I have broken drives on manual insertion tools before and it ends up costing $10-$30 for a suitable replacement as well as the time it takes to get the replacement delivered. If the screw breaks on this gun you just replace a 15 cent allen screw instead of some bespoke mechanism. A very clever way of getting it done.The tool comes with multiple drives and anvils (all hardened appropriately) for each size as well as extra thrust bearings and a circlip for the mandrel. It is very complete. The air inlet is a very nice universal joint style fitting that uses straight threads and an O-ring seal. It does not leak. The exhaust is situated to blow away from the operator.The only problem I had is the inlet uses a restrictor that can be dialed from high to no pressure. It's relatively small and not divided or numbered. Small rotations can result in big changes in air pressure. When that happens, consistency is all but gone. This pressure is particularly critical on smaller, thinner rivnuts and can make the difference between a nice job or a broken installation screw. To make things a little more exact I dialed the restrictor to 100% flow and then installed a separate inline regulator with a gauge. Now, I can, for example, dial up exactly 32 lbs of pressure for a specific sized rivnut and I will get repeatable results each time. I suggest making a few test pulls in a similarly sized (thickness) piece of material to dial in exactly the pressure you need before doing the 'real' job. The air pressure may change depending on material and thickness so I keep track of my settings so I can repeat them on other jobs.The Clatoon rivnut gun was THE answer for me. I no longer dread having to install rivnuts and I can actually have some fun installing them now. I am extremely happy with this tool, but get an inline regulator and you'll make this tool 100%.