Your cart is empty.
Your cart is empty. GRONGU MKP-34 prop and nut kit E 1865019 replacement for minn kota shear pin
Package Include
Replacement for minn kota prop include：
2 x 2093101 3/8"-24 Prop Nuts
2 x 2262658 1" x 3/16" Large Shear Pins
2 x 2091701 Washers
(Warm Tips: A crescent or socket wrench are required in order to install or tighten the nuts properly.)
Compatibility
The trolling motor prop nut Compatible with Minn Kota Props: MKP 38 & MKP 33 Weedless Wedge 2 prop(part number 233160/1865018).
Replacement for minn kota trolling motor prop replacement guides:
1. Disconnect the motor from the battery before changing the propeller;
2. Hold the propeller and loosen prop nut with pliers or wrench;
3. Remove prop nut and washer. If drive pin is sheared/broken, you will need to hold the shaft steady with a screwdriver blade pressed into the slot on the end of the shaft;
4. Turn the old prop to horizontal for preventing the drive pin from falling out, and pull it straight off. If drive pin falls out, push it back into the armature shaft;
5. Align new propeller with the drive pin;
6. Install prop washer and prop nut;
7. Tighten prop nut 1/4 turn past snug;
(Be careful: Over tightening prop nut can damage prop and bend the drive pin.)
Pierre
Reviewed in Canada on July 23, 2024
Livraison très rapide
Daonne
Reviewed in the United States on May 19, 2024
I think having an extra set of these are very very necessary. I broke mine when my fishing line got caught up in the motor and didn’t know I could order through Amazon. This is something that should always be on the boat.
bob
Reviewed in Canada on October 15, 2024
Je le recommande
Roy
Reviewed in the United States on August 7, 2023
You actually get 2 replacement pins
kentlai
Reviewed in the United States on August 19, 2023
good
marc normandeau
Reviewed in the United States on July 9, 2023
Does not fit minn kota terrova- multiple searches this came ups be said it fit. Does not.
michael loes
Reviewed in the United States on December 29, 2023
Everything is fine, but the shear pin is a very tight fit. It will work for a backup, but if you use the shear pin you will have to tap it in.
Recommended Products
$218.99
$ 99 .00 $99.00