Your cart is empty.
Your cart is empty.Polyurethane based suspension, driveline and chassis components have been designed as an upgrade to the soft factory rubber components.
Scott Boensch
Reviewed in the United States on February 25, 2025
Not what i wanted, no bolts included
Thanks😊
Reviewed in the United States on June 12, 2024
👍👍👍👍
Keith ashford
Reviewed in the United States on May 6, 2024
Quality product. What i was looking for.
Joe
Reviewed in the United States on November 14, 2024
Great no complaints
John G.
Reviewed in the United States on March 4, 2022
The instructions where OK. They are a little off on the radiator support bushings and the rear cab bushings.I recommend to pay close attention to height and girth of these bushings.The ride was way stiffer than anticipated. I have always heard the ride was a little stiffer, But its almost like riding on bricks. It does get a little better after a few hundred miles. But not close to rubber bushings. Also, be generous with a high ptfe teflon lubricant inside the bushings and on the contact surface to the body. After about 100 miles the bushings started to squeak. I had to loosen the body bolts and lubed the contact surfaces. Hope this helps.
J Nunez
Reviewed in the United States on July 29, 2020
They fit and work perfect, Only thing the instruction shows you to use the same size on the cab, But the taller ones go to the back of the cab...
REC
Reviewed in the United States on January 21, 2014
I had collapsed and rusty mounts in my vehicle. They had been worn out for a long time and fell through the rusty enlarged holes. I bought some huge washers and brought them and the bushings to a machine shop to have the holes enlarged to fit the bushings. I lined every thing up and tack welded the washers in place, removed the bushing and finished welding the washers. My vehicle is like new again and they were 1/4 the price of OEM.
truckin tim
Reviewed in the United States on March 4, 2013
I bought these thinking they would be comparable to the energy suspension poly bushings. At first glance they appear to be quality parts. After painstakingly removing all of the nearly rusted together body bolts, I removed the old bushings, and swapped all the metal parts over to the new bushings. Did one side at a time, then lowered the body back on to the frame. Right away I noticed that the body lines running the length of the truck did not match up with the bed. Checked twice to be sure I didn't miss any parts going back together. Took the bushings back out to compare with the OE, and they are quite obviously A HALF INCH SHORT. I wasted over 4 hours of my day off installing this TRASH. Stay away from these bushings!
Recommended Products
$38.99
$ 19 .99 $19.99
$13.11
$ 6 .99 $6.99