Great product looks great Thank you.

It fit on my rock island armory 1911 pretty well highly recommend

Had to do a minor adjustment, great fit, great look, feel is great, less than 3 minutes to install, light works well also

I received the product missing a screw but after a couple days of communication with the seller this was resolved. They were very reasonable to deal with so I'm keeping at 5 stars.Any concerns with how cheap or flimsy it looks were immediately gone when opening them package and I was even more impressed with how it felt in the hand upon installation.Give it a shot! Not many options in aware of like this for the 1911's.

This fits my OD Green, Tisas 1911A1 like a glove, and really looks good on it. I haven't tried to fit anything to the rail yet. The grips are well textured and feel good in the hand. It doesn't interfere with any of the controls, slide lock, safety, magazine eject, or with field tear down. I can recommend this if you are looking to "spruce up" you 1911 pistol.

This product went on my SA Emp4 with a little fitting, not much for a average joe! Though its a bit long for the EMP 4 it still looks and feels great and actually saves the finish on your gun! Its a shooters preference but Probably best for Regular size commander an up. Im not sure the polymer/ plastic is the same as the GLS polymer material as on a glock but its good enough. One thing I did was cut out a space for the serial numbers to show because this will cover the #s on the gun, and "In a pinch" LE will not say please remove the grips so we can check the numbers to make sure this is your gun !!!!!

I kept this unopened since while. Finally me décides in opening. Me Michel J MaiLLET should have opened the box sooner. Upon reading the package … me Michel J MaiLLET discovered certain elements within me person ~ Michel J Maillet

Q&Aの欄にも既に書き込みがありますが、マルイMEUピストルは同社M1911A1とはダストカバー周辺の形状が異なっているため、そのまま装着するとダストカバー周辺が反り返り不恰好になります(作動自体はできなくもないです)。M1911A1には無加工装着が可能です。ウォーリア･シリーズは後付けアンダーレイルを装着していますが、これはビス2本とフレームの穴でかみ合わせて固定されているだけなので、ビスを抜いてレイルを取り外せば装着可能です。が、ウォーリア･シリーズは基本的にMEUのフレームにレイル用の穴を開けたものをベースにしていますので、無加工だとMEUと同様の症状が起きます。これを回避するためにはダストカバー周辺をM1911A1と同等まで削り込むか(結構削る羽目になります)、M1911A1のフレームを入手してビーバーテール対応に加工するかのどちらかになります(ポリマー製のグリップを加工するのは大変なので除外しておきます)。このグリップを装着することでダストカバー下部に20mmアンダーレイルが追加されますが、しかし基本的にこのグリップは専用ホルスター(Recover Tactical HC11)とのセット運用を想定して設計されていますので、ホルスターと併用をしないのであれば、実用上ではレイルの無いMEUはともかくウォーリア・シリーズに無理をして装着する利点はあまり無いと思って良いと思います(レイルがあるフルサイズが欲しいならナイトウォーリアでいいという話もありますし)。とはいえ、仮にウォーリア・シリーズに装着する場合は加工部は外付けレイルの下に隠れる位置なので割とラフに削ってもレイルを付け直せば隠せます。念のためレイルパーツの外淵部分をシャープペンシル等でなぞりガイド線を引いておくと良いでしょう。なお、マルイ純正のグリップウェイトは当然ながら使えなくなりますので「オモチャか！？」と思うほど軽くなります(オモチャですけど)。さておき。まずこのグリップは装着するとグリップフレーム前部を覆うタイプなので若干前後に太くなります(1～2mm程度ですが)。しかしトリガーにかかる人差し指や親指が当たる位置は薄く作られており、しっかりと握りこむことが出来ます。また、右側パネル裏はアンビタイプのセフティにも対応するスリットが設けられています。手にしっかりとフィットするグリップ感もなかなかですが、しかしやはり真価を発揮するのはホルスターHC11との併用でしょう。お互いをセットで運用する前提で設計されていますので、ガッチリとした固定と素早いドロー、そしてアンダーレイル用アクセサリの装着を全て同時に実現できます。私はナイトウォーリアへ装着しましたが、純正パネルのダブルスタック並みに横に厚いグリップよりこちらのほうが好みです。難点を挙げるなら、トリガーガード～グリップ前面を丸ごと覆い隠すためハイグリップには向かない印象があるところでしょうか。マガジンキャッチ付近が3mmほど厚くなります。余談ですがメーカーのWebサイトを見るに、このCC3Hのほか、CC3Pというグリップフレーム前部を覆わないタイプやスライダー交換式グリップパネル、可変ベルトクリップ搭載型パネル等面白いコンセプトのグリップが多数存在しているようです。こちらもいずれ国内で入手できるようになると幅が広がって良いなぁ、と思うんですが、いかがでしょう？

自分はガバメントmk4につけました何も加工せず取り付けできました見た目もガラっと変わりますですがソクスナのランチャーの取り付けはオススメしませんランチャー側の溝と、この商品のレールの厚さが上手く噛み合わず真っ直ぐ取り付けできませんでした

I purchased the rail system and holster together, which I will also review together since you can't really use one without the other. I suppose you could use the rail system and a generic one-size-fits-all nylon holster, but let's assume you don't want to use a cheapo $10 holster to retain your firearm. You may see this exact same review on both items.First of all, let me save you some time: if you need a concealed carry holster, this is not the system you're looking for. I struggle to understand how the Blackhawk Serpa holsters can claim they are designed for concealed carry, and this one is slightly wider and bulkier. Definitely designed for open carry.First impression out of the box was that I wasted my money (but keep reading!) The packaging was cheap and looked like a Walmart knock off. Looking at the rail parts and holster in their packaging, and feeling how light the entire box was, they appeared unimpressive. HOWEVER, I was pleasantly surprised to discover that they were actually quite solid and sturdy, with the exception of the paddle which I'll describe later. The holster itself is thick and feels rugged, the release button is easy to index, and weapon retention is excellent. I did feel a slight give when I pulled hard on a holstered weapon, but it did not release until I pressed the button (active retention model). The roto system allows you to cant (tilt) the weapon to any angle you want with the included Allen wrench.The rail system is excellent. Appears thin but it's rock solid and doesn't flex as I feared it might. Installation is as simple as removing the grip panels and replacing them with this rail system, plus two extra screws on the trigger guard and end of the rail. No permanent alterations to the weapon. Installed on a Kimber Pro Carry II with no issues, fits like a glove and feels very solid. Adds a very slight bit of bulk to the grip. Ridges on the grip area help counteract the smooth plastic; it feels similar to most polymer frame handguns. I wonder if a Hogue grip would fit on this system? Cutouts for the magazine release, slide stop, and safety are perfectly placed and appear to be ambidextrous-safety-friendly, although my weapon does not have one.Attached a Streamlight TLR-4 and it sits very well, about 1/2" lower than an integral rail so be aware that your buttons will be in a slightly different location than if the rail were part of the frame. But then if you had an integral rail you wouldn't be shopping for this.The paddle on this IMI-compatible product leaves a little to be desired and is the only reason I took away one star. It feels a little flimsy, as if someone could walk up and rip your holstered weapon right off the paddle. Perhaps this can be resolved with the IMI belt loop adapter, I may order one and find out.Another issue I have, and this is less of a problem and more of a slight annoyance, is re-holstering with an accessory attached. The hard rubber flaps that serve as the trigger guard do flex to allow the accessory to pass by, but they're rigid and holstering is a little clumsy and takes a bit of practice to perform smoothly. I tried bending the flaps back and forth a few times as suggested in another review, which helped a little. With no accessory it was very easy to re-holster. Perhaps it (or I) will become smoother with more use.Overall a great system and I'm very happy with my purchase. As I stated earlier, it is compatible with IMI Defense accessories so you could add a drop leg base, magazine holders, belt loop to replace the paddle, etc.

Review: (My weapon: Citadel Traditional Fullsize 1911-A1 9mm)Summary: Awesome product, looks and functions great, needs filing to fit properly, shipping was horrible.Fit: It "fit" the gun out of the box, however if I literally would have just taken it out of the box and left it as is the gun wouldn't of functioned. The slide rubbed it and the grip section was too thick to let the grips mate in the middle. The grips themselves are clearly made to be ground to fit per application there are "built up" areas of material around sections that can be easily filed for a custom fit. Bottom line is 45 minutes later and a pile of plastic these grips fit perfectly and look great.Function: The included hardware is functional and easy to install, the grips are not any wider than the set of hogue wrap around grips I took off to install them (they may feel "wider" to people who use panel grips as any wrap around grip does. I was going to stiple the grips when I got them but there is no need the raised grip texture is pretty effective. Feels good in the hand and the rail works perfectly. I have a laser/light combo on there fits perfect the gun does not feel significantly heavier than before even with the light/laser on it. These grips also surround the area where the slide release pin is and helps to keep you from scratching up the frame when you are taking it apart, added bonus.Aesthetics: Confirmed the factory picture does suck as I suspected and the grips are a much tougher looking dark OD green like they should be not the light olive looking color in the photos. The gun looks mean I really like the looks of these grips.Note: Let me say while the item is awesome shipping speed was horrendous it took it like 10 days to drive from LA to PDX which is literally as simple as saying leave LA get on the I5 and stop when you get to Portland 8 hours later... Its not like it came from Hong Kong, from which I have received products faster than I got this. Ill try to add a picture to the customer images.