Your cart is empty.
Your cart is empty.Jason Cox
Reviewed in the United States on September 18, 2024
Fits perfectly, works really well, made with quality material and so far really happy with this product.
Off The Grid Ken
Reviewed in the United States on September 10, 2024
I'm I'm starting to become a fan of Navifree. Everything I've acquired from them so thus far and I've gotten at least 7 to 10 items from the company have all been quality and these Rock sliders are no different.If you're unaware of what these are for they're basically there to protect your doors and you from brush rocks anything that may damage the side of the vehicle and possibly damage you if you have half doors.Installation is simple it's pretty much play you just follow the simple instructions.The product itself is heavy and well made and although they haven't been needed up to this point they look like they do a good job of protecting the razor.Until We Meet Again-Off The Grid Ken
Sparky
Reviewed in the United States on August 28, 2024
Not only do these look great, but they are nice and sturdy. I have slid around several trees at crawl speed and i have not bent them yet. The welds look good, and the finish was nice, before I started sliding around trees. The fit was spot on and they were easy to install. I would buy these again. 5 STARS
Martina
Reviewed in the United States on August 16, 2024
they are not made in the usa witch not a fan of but honestly they are great, installed them went out to the trails hit them in different spots and they preformed very very well . Very happy. i will be buying the same but for 4 door
J in AK
Reviewed in the United States on August 14, 2024
These are much better than the Polaris ones I bent up on rocks. And the price is much better.
Kevin
Reviewed in the United States on August 11, 2024
I'm really pleased with these rock sliders from Navifree. They were extremely well packaged in a heavy cardboard box. The sliders were wrapped in bubblewrap and there were fitted blocks of styrofoam to protect the bars in transit. In addition to the bars there was a small box that included all of the needed hardware and installation instructions.The bars were relatively easy to install by following the instructions. The L-bolts fit inside the frame tubes and are held in place with a long screw that passes through the screw holes originally used by the screws holding the lower kick panels in place. I found that by looking through the small hole where the original kick panel screw was located it was possible to line up the hole in the L-bolt before inserting the new screws. The L-bolt screw holes have a leading taper that helps guide the replacement screw into position. It takes a bit of patience but is not overly complex. The very last L-bolt was a bit difficult due to the fact that the hole in the kick panel was offset and it made it difficult to line up the new screw correctly. This was an issue with my particular machine, NOT the hardware included with these sliders. Once I relieved some of the kick panel material that was partially obstructing the screw hole the last L-bolt attached as easily as the first five. (Side note... I much prefer using the L-bolt style of attachment points instead of the expansion bolts that come with Polaris rock sliders. I believe it will result in a much stronger attachment and simplify removal if I ever decide to remove or replace them.) Once the L-bolts are installed it's easy to attach the slider bars using the included spacers, washers, and nuts.The slider bars appear to be very durable. They have some substantial heft to them and look like they will hold up well. The welds are very good and the powder coat finish is even with no gaps or thin spots. The finished look is exactly what I was hoping for. These not only add an extra layer of protection to my RZR but also look great! Overall I'm very happy with these and wouldn't hesitate to recommend them to anyone looking to upgrade their machine.
Eric
Reviewed in the United States on July 29, 2024
These are tough rock sliders that are relatively easy to install. To install them the three T40 bolts that hold the lower kick panel are removed, "L" bolts are installed and new, longer bolts thread in where the T40 Torx bolts were removed and into the "L" bolts to hold them securely in place. My only advice: start the new bolts into the frame before trying to catch the hidden side of the "L" bolts as doing so makes it a lot easier. Once the "L" bolts are secured, self-centering washers that shoulder onto the round bar stock of your RZR's frame as well as the flats of the rock sliders are put on, the rock sliders themselves, and then lock washers and nuts. All in all pretty easy.The rock slider finish is good as are the welds.
ck1233456
Reviewed in the United States on November 12, 2024
They fit well had zero issues installing them and they’re very sturdy
Recommended Products