Your cart is empty.
Your cart is empty.Product Description
RockShox rear shock eyelet bushing fits ARIO model. A genuine and original easy to fit Rockshox part. Size: 1/2-inch x 1/2-inch.
Set Contains:
2x Rear Shock Eyelet Bushing
sixpin
Reviewed in the United States on October 5, 2024
I was exactly I was looking for my rear shock Fox
ANTONIO
Reviewed in Spain on July 27, 2023
Envío rapidísimo de Flow Bike Store, el producto tal y como se describe y bien empaquetado. Perfecto.
Ron Callahan
Reviewed in the United States on June 6, 2023
I needed this bushing in order to install a RockShox shock onto my new Commencal Tempo mountain bike. Even local bike shops didn't have this quite specialized piece. I rated it lower on 'easy to use' not because of this specific part, but because in general, these bushings take a little bit of work to press into the shock. Look for bushing presses here on Amazon - they'll definitely make installation easier.
Sven Becker
Reviewed in Germany on January 21, 2023
Auch wenn diese Buchsen eigentlich für Federgabeln sind, und ich dringend Buchsen brauchte für meinen RockShox VanR Dämpfer. Muss ich sagen, das sie von den Maßen her auch passen. Außendurchmesser 150 mm und Innendurchmesser 127 mm und konnte ich sie ohne Probleme einpressen und auch ohne weitere Probleme in mein Bergamont Big Air 6.2 einbauen. Habe mir aber trotzdem nochmal die richtigen Dämpferhülsen bestellt, passend zu meinem Dämpfer
fabrice 08120
Reviewed in France on December 29, 2022
Pour amortisseur rockshox ( Monarch ect.... diamètre 15 x 12.7)
James Cruickshanks
Reviewed in Canada on February 28, 2021
Very expensive
Korekom
Reviewed in the United States on July 27, 2020
I got them for Fox RP23 on older Yeti ASR5, that had developed a play. needed fast shipping and I figured 1/2 shock end should be the same for fox and rock shox, and there were, so no issues on comparability. Worked great and no more play. I used vise (soft jaw) and socket, to remove and reinstall, but proper removal tool probably would be good idea.
Jose
Reviewed in the United States on February 15, 2020
Muy bien
Tim
Reviewed in the United Kingdom on April 12, 2020
I was searching the internet for these to go on my Nomad. I ordered from another online site and when arrived found they weren't wide enough. Found these on Amazon and they were the correct size. Now fitted to the bike, all movement that was there has gone.
Jesus Fernandez
Reviewed in the United States on February 25, 2019
Make sure you buy the proper tool to remove it. It took me some time and research to understand this bushing is the one it wears on a double suspension bike. Wearing not only causes play in between components but a very unpleasant noise. Very easy to replace with the proper tool.
Nikita G.
Reviewed in the United States on September 7, 2018
As expected these bushings were a direct replacement for the Monarch RT3. They were very easy to press in using a combination of sockets and a vise. I highly recommend checking your shock for play and replacing the bushings as necessary.
Scooby921
Reviewed in the United States on July 27, 2018
Correct part to replace the bushings at either end of my 2017 Rockshox Monarch RL.
Spencer M
Reviewed in the United States on June 15, 2017
They do the job and are A LOT cheaper then letting the LBS replace them. I highly recommend getting them to replace yours b4 they are "needed".I was able to throw mine on with a vice
Recommended Products
$38.63
$ 18 .99 $18.99
$31.99
$ 15 .99 $15.99