Your cart is empty.
Your cart is empty.Product Description
FAILUN Shower Splash Guard Kit
FAILUN Shower Splash Guard is your reliable choice for effectively blocking the gap between the shower curtain and the wall to keep water in the bathroom.
Easy to install without tools,FAILUN shower water guard fits perfectly in the corner of the bathtub, preventing water from splashing onto the floor and reducing cleaning.
Large Size Acrylic Baffle
The shower corner water guard acrylic baffle area is larger and more durable, more effective to prevent water splashing, but also to prevent items from falling off the edge of the tub or sink.
Larger Angle Adaptation
90°- 105°Shower Splash Guard,that allows you to adjust an angle between the bathtub and wall (up to 105°), helping you to avoid the hassle of filler.
Nano Traceless Rubber Strips
Shower Water Splash Guard comes with a strong adhesive, which will not leave glue traces when disassembling, and a tube of free caulking glue is included.
Upgraded silicone base
Upgraded base is more stable and will not damage the wall and bathtub, and the acrylic plate can be removed and clean.
Suitable for Multiple Scenarios
Note:
1.Follow the instructions for installation. When installing a tub splash guard, wipe the edges and walls of the bathtub.This step is to maintain a longer waterproof effect!
2.Not all bathtubs are suitable, please confirm whether the bathtub meets the conditions before purchasing.
Product size: 7.87 X 7.87 inches
Product packaging: 2 X shower splash guard,1 X caulk,1 X instruction
Product Application:Tub splash guard to keep water in shower, bathtub, kitchen sink, bathroom, restroom, etc.
Easy Installation: Includes a tube of water-proof glue, eliminating the need for additional purchases.
Simply apply the glue to the edges of the Bathtub Water Guards and secure them to the sides of the bath or sink.
Prior to installation, ensure the surface is clean and dry, and refer to our instructions to avoid any errors
G. D. Golden
Reviewed in the United States on March 9, 2025
========================================================================NOTE: Product being reviewed is ASIN B0D3H546SQ, ad entitled: "Shower Splash Guard, 2pcs Tub Water Splash Guard with Self-Adhesive Splash Guard for Bathtub Corner to Keep Water in Shower or Bath (7.87 x 7.87In)"Price at the time of my order was $14. No coupons were available at that time,but there is 5% coupon listed now at the time of this review (2025.03.09). I receivedthe product at no cost for review via the Vine program.========================================================================This is simple product, does what it is supposed to do. It installed easily for my use case (see photo), and seems to be reasonably well constructed.There are two corner assemblies per box, each consisting of an outer slotted frame that fits to the wall-tub junction, and an inner "window" that then inserts into the frame. Also included is a small tube of clear silicone sealant and an applicator nozzle for it.Price ($14 at the time of my order) seems reasonable.Thumbs up: * Outer frame is flexible silicone, so it can accommodate tub-to-wall corners that are not quite 90 degrees, as stated in the ad. In my case, the junction was very close to 90 degrees, so didn't actually get to evaluate how well it might work in a case in which the angle is off by a bit, but the flexibility of the frame leads me to believe that it probably can accommodate such situations. * In my installation, the frame adhered firmly to both the tub and the tile using the supplied adhesive backing. No installation issues. * The inner "window" portion is reasonably flexible plastic, about 1/8" thick, and slides into the slots in the frame. The material seems to be robust enough to stand up to occasional bumps. * The included silicone sealant worked fine for me, and cured in less than the recommended 24h.Thumbs down: * The dimensions listed in ad (7.87" x 7.87") are not quite right: The actual size, as installed, including the frame, is about 8.4" x 8.4. I think the size given in the ad probably refers only to the plastic inner "window". The actual installed size includes the thickness of the frame.Summary: Product works as expected, ad is accurate, no installation issues, price seems reasonable to me. Five stars.
Angie
Reviewed in the United States on March 7, 2025
The splash guard works perfectly. The adhesive holds well and strong. I cleaned the area good with alcohol to ensure it was clean and free of any oils. It adheres strong. It can be move if need be but I wouldn't too many times for best results. Pull the top side tape off and leave the bottom side on until you have it lined up then slide the bottom side tape off adhering the guard as you go. I used the silicone just to add a good seal at the corner up and out. It did not look like it really needed it but The silicone was included and I think a little extra protection can't hurt. The guard itself slides out for cleaning and you can slide it right back in when it needs a little extra scrub. The instructions say to allow 24 hours to cure before use. I was extra careful to be sure the area was clean and dry and now waiting my 24 hours. It was super simple to install and exactly what I needed in the corners of my shower.
Sasha
Reviewed in the United States on March 20, 2025
These splash guards are great. They look good, are large, and work well.The silicone base is flexible so it will adjust if you don't have a square wall.It has strong adhesive and includes a clear caulk tube to fill in any gaps on the tile and seal the base.It is easy to work with and install. Make sure to clean the area well. It comes with written and diagram instructions.The splash guard insert is plastic and is removable.I used one in the shower and the other in the tub as seen in the photos.I am pleased with these splash guards.
Arian
Reviewed in the United States on March 19, 2025
I have zero complaints about these. They were very easy to install. The most difficult thing was cleaning up the residue from the ones that used to be there. That did lead to having to redo some of the caulking, but that would not be the case normally. They have helped tremendously on keeping the water where it should be, and not on the floor. Just be careful getting in and out if you're not used to having these. I've caught my foot once so far on the way out. They are definitely worth having to save your flooring especially. Recommended without a doubt.
bearcraz18
Reviewed in the United States on March 18, 2025
These sounded like a great idea to help my kids keep the water in the tub. But I found them difficult to install. The glue really didn't want to dry for me and it drove me nuts that I couldn't seem to install them in a perfectly straight line. I think this product would work better for someone who's installing it on a tub that doesn't see constant use and can give the glue the proper amount of time to dry.
BRUNILDA LOPEZ
Reviewed in the United States on March 17, 2025
easy to install, love that it’s clear and flexible, keeps the water in the tub
Rachael
Reviewed in the United States on March 16, 2025
I have a class c rv with a small shower and these really help with keeping the water off the floor. They are easy to install and just stick right on. So far they have held up well. For the price, it’s definitely a good value vs. repairing water damage. I’m sure they would fit any stand up shower or shower with tub. Even though I have a shower curtain, water was always splashing out the sides. Since it’s a small shower, it is hard not to hit the curtain with your elbows when washing. These guards really help keeping the water in. Since it’s an rv, it is very important to keep things dry since water damage is an rvs worst enemy. I highly recommend these for anyone who is battling water getting on the floor.
Steve K
Reviewed in the United States on July 22, 2024
Thank you
Recommended Products