Your cart is empty.
Your cart is empty.Gene
Reviewed in the United States on February 15, 2025
The pump head, looks nice but it let's a lot of air before you can close the lever. And, the lever is in the way,and very hard to close. Even if you losses the valve before you try to insert it on to the valve stem. Have not been able to keep it from losing a lot of air before you can close the pump head and pump up the tire. Once the pump head is locked on the valve stem, lt will pump up the tire just fine.
Tyler K.
Reviewed in the United States on July 19, 2024
Worked for a while but over time the pin that pushes the presta end down had bent out of the way and no longer opens the presta valve. Got less than a year our if this before replacing.
Bruiser
Reviewed in the United States on May 25, 2024
It was an easy replacement for the generic head that I’d previously purchased. This one is much better made and it grabs the valve better so air flows more easily. Pump heads that don’t fit as well need more pressure in the hose before the air slowly gets through the valve and into the tire, especially if you’re tubeless or have some sealant in your tubes that might be in your valves a bit. This SKS pump head is excellent and well worth the money.
Chuchuchip
Reviewed in the United States on December 26, 2024
I replaced a hose head (not the same head) that broke. It fit the hose fine & works like a charm (it's a Topeak floor pump). I didn't care for the head that came on the pump hose. This felt like an upgrade.
FatMilkDud
Reviewed in the United States on October 3, 2024
I bought this and used it on an old pump that I could not get replacement parts for. It worked great and that pump is back in action and in time for the grand kids to get some use out of it.
Anthony Kovacs
Reviewed in Canada on January 19, 2024
I'm sorry but this is just a pure waste of money. The pin was misaligned on arrival but that was an easy fix. On regular (Schrader) valves the rubber ring that should clamp on the stem is both too stiff and too soft. It is extremely difficult to adjust the pressure with which it grabs the valve so it doesn't fly off under high air pressures, potentially injuring or damaging whatever happens to be nearby. The wide head also makes it difficult to use on short valves.All in all a waste of time and money as this is only good for making its user frustrated. I went back to using my less broken pump until I can find a replacement from a real store.Note: Amazon has me listed as VINE VOICE and this is not correct. I was invited to become a VINE VOICE but my jurisdiction does not allow it due to tax considerations. I don't know how to remove the VINE VOICE label.
Dave
Reviewed in the United States on July 28, 2023
My 25 year old Innovations floor pump head broke off the lever, cheap plastic. This SKS (presta only) is very nice, seems really well constructed with the glass re-enforced plastic. It easily slips on to the presta valve stem and clamps tight with no leaks. Flip the long lever and it pops right off without loosing air. A real bargain for the price paid, highly recommend this one.
Customer
Reviewed in Canada on June 30, 2022
Fit well on lezyne pump.For very well for presta valve.You can change the interface diameter with the nut. If the handle is a little to stiff to swap 90 degree, just uncrew a little.
Sahag Krikorian
Reviewed in Canada on December 3, 2022
this works great and it's quality built
Lee
Reviewed in the United States on January 14, 2021
Installed easy enough and it fit nicely on a presta valve but all the air leaked out the back of the head.
euclid
Reviewed in the United States on December 20, 2020
Bought to replace the broken stock head on my Joe Blow pump. Works great, holds valve stem securely and doesn't leak. Installs easily with no tools.Subtracting one star because the lever snaps open with a bit of force when removing from valve stem and it hurts a bit if your finger is in the way.
Mario
Reviewed in Mexico on May 2, 2018
en la descripcion dice que se adapta a multiples valvulas, no es as'i ,tengo una bicicleta de montaña, entra pero no se adapta al pibote , deberin especificar para que tipo de valvula es
JD Bissbol
Reviewed in Canada on March 21, 2016
Work perfectly with my old CCM pump. It is true that the valve is hard at the start,but after a while gets easier to use.
Recommended Products