Your cart is empty.
Your cart is empty.Product Description
Versatile Mounting
This mount comes with pre-drilled holes that fit most dish and antenna configurations for easy assembly.
(J-Pipe Mast Sold Separately)
Designed for Stability
This mounting base is tailor made to hold 3 concrete blocks on each side to ensure the stability of your antennas and satellite dishes.
Convenient Mounting Options
This base comes with several pre-drilled holes for standard mast configurations. The frame can also be customized to your specific needs with a drill.
Hardware Included
- 4 Nuts
- 4 Bolts
- 8 Washers
Derrick
Reviewed in the United States on February 12, 2025
This weighted mount is just the right size offering a stable base for small dishes, antennas, cameras, WiFi access points, etc. I have had roof mounts that were 6x6 and a pain in the you-know-what to get up on the roof. It also offers plenty of accessory points. Great little mount.
Leanna Breezee
Reviewed in the United States on September 8, 2022
These are great non-pens, and if they don't fit the J-Pole we want to attach, it's easy enough to modify. We often install two J-poles on one non-pen without issue. The only problem is that welds can snap over time, probably due to repeated back-and-forth movement. The best fix is probably to use more weights.
Jimmie M. S.
Reviewed in the United States on August 28, 2022
Attaching the pole and foot to this was easy though leveling the entire system required a little more ingenuity.
Don Helgeson
Reviewed in the United States on August 25, 2022
The frame was exactly as described. It also had pre-drilled holes that fit the Winegard DS2000A Universal 22-inch Mount perfectly. While the frame is not as substantial as I had hoped, it has held up so far.
Summer
Reviewed in the United States on May 28, 2020
Perfect for our 4G internet dish. Super sturdy when used with cinder blocks. 60 mph gusts and it stayed in place.
Customer
Reviewed in the United States on January 14, 2019
Good quality product. Fast shipping.
Customer
Reviewed in the United States on May 29, 2018
Works great
Anonymous
Reviewed in the United States on May 29, 2015
Earlier, I purchased a Steren 221-110 mount from a different seller for a couple of dollars more than this Skywalker mount and have been satisfied. Unfortunately, the seller raised his price, so I bought the Skywalker mount as the photos of both models look similar, and indeed they are nearly identical in overall dimensions; number, location, and position of mounting holes; and included hardware. However, the Skywalker mount uses thinner gauge materials than the Steren. The difference in weight and stiffness between the two mounts is quite noticeable. Also, the paint applied to the top side was unsatisfactory. It appears as if someone sprayed the bottom side with paint and neglected to spray the other side, so the only paint on that side was from the overspray. I ended up painting the entire top side with a can of spray paint as the exposed metal was starting to rust after a couple of days. If I had to buy another, I'd choose the Steren 221-110. It was not worth the effort and expense to return or repaint this item.
Recommended Products
$35.00
$ 15 .99 $15.99