Your cart is empty.
Your cart is empty.Product Description
Works with the official Raspberry Pi 7" touchscreen display
The SmartiPi Touch 2 is a case for the Official Raspberry Pi display and Raspberry Pi 3,4 or 5. It also has a spot for the Official Raspberry Pi camera v1,v2, or v3. Not compatible with Raspberry Pi HQ camera. Requires a 5v 2A micro USB power supply if using a Raspberry Pi 3. Requires a 5v 3A USB-C power supply if using a Raspberry Pi 4 or 5.
Not compatible with the The Raspberry Pi Touch Display 2.
Raspberry Pi display, Raspberry Pi camera, and Raspberry Pi not included.
Please note: Raspberry Pi must be removed to access microSD card.
Key features
Raspberry Pi camera integration
Mount the Official Raspberry Pi camera V1, V2 or V3 behind the front face plate. Not compatible with the Raspberry Pi HQ camera.
Cooling fan included
A cooling fan is included to keep your Raspberry Pi cool. The cooling fan connects to the Raspberry Pi GPIO. Two speed options are available.
Works with HAT boards
HAT boards can be attached to the Raspberry PI GPIO pins and secured to the case using the included hardware.
All ports are accessible
All ports of the Raspberry Pi are accessible, including the HDMI.
Compatible with the Official Raspberry Pi 7" display
The case is compatible with the Official Raspberry Pi 7" display and Official Raspberry Pi camera V1, V2 or V3. The camera and display are not included. Not compatible with the Raspberry Pi HQ camera.
The Raspberry Pi is mounted in a back compartment
The Raspberry Pi is mounted under a door in a back compartment. The included white ribbon cables connect to the display and Raspberry Pi camera. Works with Raspberry Pi 3,4 or 5. Works with the Official Raspberry Pi camera V1,V2 or V3. Not compatible with the Raspberry Pi HQ camera.
Camera mount
The Official Raspberry Pi camera V1,V2 or V3 is secured to the case with the included screws. Not compatible with the Raspberry Pi HQ camera.
75mm VESA mounting points
Four M4 threaded mounting points on the back can be used to attach the case to a VESA mount holder.
Small mounting feet included
Small mounting feet are included and can used instead of the stand to mount the case to any surface that you would like.
Splitter cable for the Raspberry Pi 3,4 and 5
A splitter cable to power the Raspberry Pi display and Raspberry Pi 3,4 and 5 is included.
Adjustable angle
The case angle can be adjusted by pivoting it backward or forward. This is an essential feature to improve usability.
Three front faceplate options are included
A building block compatible faceplate with camera hole, a plain faceplate with camera hole, and plain faceplate without camera hole are included. They can be changed with the supplied screws.
Jerma Panda
Reviewed in the United States on March 3, 2025
I had just recently purchased my first Raspberry Pi and it seemed like the cases were piling up faster than anything. When I decided to purchase the official Pi 7” touchscreen display, also discovered smarticase.com. Since this I have only had to purchase one other case, a Smarti Pi Touch 2 Pro. It’s an unbelievably affordable solution. Completely functional out of box and lots of printable upgrade options as well. The build quality is amazing with the simplicity to customize easily if desired. I had an issue with some missing ribbons cables and the customer support was unbelievably quick to respond and solve the issue ASAP. The correspondence from Tom Murray in customer support emails and CAD downloads in menu at smarticase.com that this case would be my best choice.
Holly
Reviewed in the United States on February 23, 2025
I liked the product and it met my needs, but mine came without the cooling fan. The assembly is pretty easy, but the instructions could get confusing for some as they jump between a couple of different variants (pi 3 and 4 vs pi 5 and then camera vs no camera). Overall, I would have given it 4 stars if the fan was delivered as expected.
Slider
Reviewed in the United States on February 29, 2024
The presentation and compactness of the build is great. The fan include it borderline USELESS. It is so loud like it has a bearing problem or something.... Please fix the fan, but everything else is perfect.
richardfalzon
Reviewed in Australia on December 8, 2024
I found that the SmartPi Touch 2 only fits the original Raspberry Pi 7" display not the version 2
Martha S.
Reviewed in the United States on October 20, 2024
Screen that is meant to fit must be forced to align with the screw holes. Biggest issue is the micro SD card is to serviceable after installation. Nuts are used to hold the PI in place which must be removed and the PI module must be carefully disconnected from ribbon cables to access the SD card. There is no thought and care taken in the design what so ever. The worst product I have ever seen for a PI! Don't waste you $$$!
Christian H.
Reviewed in the United States on July 30, 2023
The case is great and unlike some others has all ports visible from the outside. Assembly is a bit fiddly, but well worth it. The case is also sturdy and the stand folds flat, which is useful for travel.
VY2HF
Reviewed in Canada on December 23, 2023
I wanted one of these to house my RaspberryPi 4 running a weather station monitor web page. I took my time assembling it, and hit a few dead ends, but that was mostly regular trial-and-error on my part. Once I got the Pi into the case and properly wired and placed, everything fit together perfectly.I had some initial setup problems with the touch screen, but that was not an issue with the mounting case at all. I just needed to update the Pi firmware and the touch screen worked fine.In the photo I have it mounted in its final location, and it works great.
Paul B.
Reviewed in the United Kingdom on October 20, 2023
Brilliant sturdy case for my Raspberry Pi 4 and 7" display. Assembly was straightforward - thanks to the online instructions. Highly recommended. I'm running piCoreplayer OS with Logitech Media Server on the Pi.
atgc
Reviewed in Japan on January 8, 2023
熱がこもりやすいかな。でもいい感じです。
Camarillo Brillo
Reviewed in the United States on February 14, 2021
They try, bless their hearts, to make it easy to assemble but they obviously haven't gotten feedback from a few test users.The official RPi touch screen arrives with the controller already attached with standoffs on top. You have to remove them and use screws or the screen won't fit. It does ... nicely. It seems solid and professional and commercial. Oddly, the swivel legs are not centered - I'm sure for a reason but it looks odd.The instructions assume you have a camera and should have a skip flow.The raspberry pi 4 fits perfectly but the screws are in the frame point up over the board. I started with standoffs and the door wouldn't fit. I messed around with that way too long. I switched out the standoffs with nuts. Have you ever tried to tighten a tiny nut with almost no clearance without a micro nut driver? I picked a baaaad day to have that cup of strong coffee. I messed with the door - a lot - and finally figured nothing fits with the door. I think the door holds the board. But, I had to remove all 4 nuts. Ultimately it came together with the fan and looked like a commercially made product.All the needed parts were there and nicely packaged. It looks great and the frame fits nicely. Beware you have to almost completely disassemble the Pi half to change out SD cards.My time? Way too long even using the instructions.Money very well spent overall.
Harry Lee
Reviewed in Canada on January 23, 2021
The case is slightly bigger than what I have expected but it is still perfect. The case is in pretty high quality and seem to be very tough.The case comes with 2 different kinds of covers. One for cooling fan application, and one for easy GPIO access. It also comes with 2 ribbon cable, where the longer one for Camera installation, and the shorter one for screen installation. On top of that, the case also comes with two USB splitting cable to power up the screen and you pi at the same time, if you don't want to use GPIO to power your screen. 1) USB-C to USB-C and Micro USB-A for Pi 4 2) Micro USB-A to 2xMicro USB-A for Pi 2, Pi 3 or Pi B+.It's also not too difficult to access your SD card. The Pi can be easily removed from the case by taking off the cover. No tool is required at all.Overall, it's a very solid build case as long as you don't mind the jumbo size. What could have been better is all the ports enclosed inside the case. Currently, in my opinion, the USB Ports and the RJ45 Ports are considered hanging outside of the case.
Keith
Reviewed in the United States on August 4, 2020
I really like this case. It's compact and feels like a quality product - it is solid and heavy, and has a great fit and finish.I used a Pi 3B+ and mounted it to the back side of the screen holder. Installation consisted of several steps: Removing the included display board standoffs (save them for future use on a Pi hat), inserting the display ribbon cable and routing the included camera cables (the camera is optional, I didn't use one), mounting the screen and camera with screws, connecting the Pi board to the cables and bending/routing them until the Pi sits flat on the mounting posts on the back of the screen holder, and inserting the retainer/vent piece into the retaining clips. I attached the bottom platform after that and attached the power splitter cable. The kit requires the appropriate Pi power supply but includes power splitter cables for both the Pi4 with a micro and a USB-C connector, and another one with two micro connectors for everything else. There are some optional parts as well for different configurations like a fan-holding retainer, surface mounts, and several bezels for the camera face covering. All hardware and cables are included, so this is really a convenient kit. Well done!
Andy from Texas
Reviewed in the United States on August 18, 2020
There are a number of alternatives on how to mount the Pi: With a fan, without a fan and no cover over the Pi. Beware that the ribbon cables that go between the Pi and the display (which they provide, thank you!), are difficult to push into the connectors. This is normal. All parts and pieces fit together nicely. In one of the steps they show the base attached to the case, but there is no instruction on how to attach them together.All in all it is a nice case that holds it all together well. I used a Pi 4 and the supplied fan, though it doesn't seem to be needed. The case is cool to the touch.
Recommended Products