Help with the base noise, now i do not disturb my neighbors

Previously, my windows shake at 20% volume. Now, having tested my sub at 50% volume, windows still no vibration. Cool!

I use the P10 size for my yamaha hs8s. I don't have a lot of space and have wood floors, so there was a lot of unwanted vibration and noise any time I had the sub turned up. Adding this iso platform dramatically reduced the unwanted vibration. I can now blast my sub. Well worth it!

My Paradigm Reference Seismic 10 subwoofer was sliding on the floor so I order this pad. After ordering it, I checked my subwoofer legs and they were not level. After levelling the legs it stopped moving. I tried cancelling the pad but I couldn’t. The pad came and I tried it and I really liked it! It does clean out the base and reduce vibration in other rooms. I actually even ended up increasing my subwoofer level and its cross out frequency just a bit as the bass is very clean and tight now.

I might have gone a little overboard with a klipsch 12 inch in my home. it shakes the walls, the floors, the cabinets. This pad was a perfect fit for the dimensions of the sub, and the improvement to the sound was as dramatic as when I added a subwoofer in the first place. It prevents the sub from using your floor itself as a diaphragm and shaking your walls to pieces - even if you're a basshead like me, this is important. Because the sound pressure sensation is still there, it's just not being turned into mud. The cleanliness of the sound was immediately a dozen times better. It can still punch you in the chest with bass, but isn't a muddy mess.If you own a subwoofer, I'm not being hyperbolic (I don't participate in all the superstition around the hifi world) in saying that this was every bit as dramatic for sound quality as the subwoofer itself. Do not get a subwoofer without an isolator pad like this. And if you got a klipsch 12 inch, this is the one you need to fit it. perfect footprint.

this works perfect ! , now i can use my subwoofer in my apartment . reduce significant the vibration

Believe it or not, I didn’t buy the product for its sound-dampening capabilities. Rather, I sought a base to place under a recent vanity bench that was 3” lower than an adjustable office chair that didn’t fit the decor. Slapped on some moving glides for easy slide and it works perfectly. No discernible caving with continuous weight during hair styling. Maybe wasn’t the intended purpose for the product but it performs well for my needs.

I can't believe the quality in sound. I just got an hour ago and the difference was immediate. Worth the investment.

👍🏻

Great service and quality product

I absolutely love the look and impact to the sound quality this platform makes to my compact home theatre setup. Wish it was always available on Amazon.ca so you don't need to pay double to a reseller or pay 50% extra buying it off Amazon.com.Bought it for my Polk PSW111 subwoofer located on the suspended hardwood floor in living room and can't be happier with results - no more floor/walls/fireplace mantle/media rack resonance. No more muddy bass because of everything in the room working as a part of a sound system when it absolutely shouldn't.People arguing about the importance of getting subwoofer separated from the floor system simply need to go and watch dedicated videos from SVS. Those guys absolutely recommend disconnecting all their subwoofers from a floor system by attaching high tech vibration absorption feet. And SVS is times more reputable when it comes to subwoofers than high quality but still pretty much consumer level Polk and Klipsch brands (I know that fancy Klipsch subwoofer fans may disagree with this statement but Klipsch is a mainstream brand with some extremely expensive units on their MRSP list).I witnessed this first hands - low frequency sound quality got improved so much as if I invested in an upper-tier subwoofer unit. No resonance, clearness and bass depth - all got better.Recommend this Acoustic Isolation platfrom for people with 8" or some 10" subwoofers, especially installed on a wooden floor.

The media could not be loaded.

I have a subwoofer with dual 12" drivers tucked into the server cabinet for the surround sound system in my family room. The dual 12" drivers are forward and down-facing, so the latter drives base directly into the bottom of the cabinet and into the floor under the cabinet. Before I purchased this product, the subwoofer's placement would make everything from the cabinet to the windows rattle depending upon the base frequency, especially during those long periods of consistent, low frequency, signals - like you expect in those intense, elongated, seconds of a movie leading up to the big moment or scare. Most disconcertingly, the rattling inside the cabinet could get so bad, it would almost sound like speaker popping or distortion. It of course wasn't the speaker, this was literally caused by short, fast, hard, low frequency signals that would cause the subwoofer to bounce repeatedly off the ground. I would open the cabinet and find the subwoofer unit pressed against the wall diagonally, a foot or so away from its placed position. To complicate matters further in my case, there massive openings and metal grates installed at each end of the cabinet as well as cutouts throughout the cabinet to access wires fed through the wall and or to promote air circulation for the components installed in the cabinet. As the cabinet is custom built for wire access, management, and airflow, it is not solid and lacks rigidity. Therefore, it enhances rattling from low frequency signals of the subwoofer. Obviously, I needed a solution other than taking the unit out of the cabinet only to have an eye sore in the family room, which would likely not eliminate the problem as it would still be placed next to the cabinet.To be honest, I was not expecting "the final solution" out of this product. I hoped it would be just enough of an improvement to make the purchase worthwhile, and then maybe I had to add some sound dampening around the subwoofer in further support. Most importantly, I hoped it would at least eliminate the problem of the sub hoping around in the cabinet like it was "doing the twist" to the Chubby Checker song - I'm old enough to know, but some of you may have to look that one up. After all, as described, there is a lot for this few inches of what appears to be foam to overcome.The product arrived, and upon quick and easy installation by simply lifting the sub and placing it on top of this product, to my surprise, it pretty much eliminated any and all of the problems. It even eliminated or significantly reduced rattling/vibration in other parts of the room. It is truly amazing that a few inches of what appears to be foam - although, I am sure is so much more technical in its design - would clean up the base sound so significantly, especially considering the characteristics of my setup.This product is a more pricey compared to its competitors, which fell more in the range of 25 to 50 dollars. However, it was worth every penny, at least in my case. If an investment into a 70 dollar product cleans up these types of issues caused by a subwoofer that costs over 15 times that amount, it is well worth the investment. Therefore, to my amazement, this product unexpectedly fully fulfilled its purpose as advertised, and for that reason this is a 5-star product in my opinion. I am very happy with my purchase, it has saved me from further investment of additional sound dampening, installation, the any additional time it would have taken to figure it out. If you are experiencing similar issues with your subwoofer or speakers, this product is well worth the opportunity to fully resolve the problem.