Your cart is empty.
Your cart is empty.Product Description
Amerbm impact wrench spring compressor tool:
- Are you still worried about the compressor malfunctioning when compressing the spring?
- Are you still struggling to compress the spring with a ratchet wrench?
- If you feel it is time to optimize your work, please use the Amerbm spring compressor tool.
- Amerbm spring compressor tool application areas include automotive workshops, industrial and handicrafts, and hobby areas.
- It is characterized by high-quality materials and excellent workmanship. With overload protection device, which means that it allows operation with an impact wrench.
- Amerbm spring compressor tool suitable for the safe assembly and disassembly of Macpherson struts on the front and rear axles of most vehicle brands.
High efficiency：
If you feel that the traditional manual work is too low or too tired, then use the Amerbm impact wrench spring compressor tool.
Amerbm spring compressor body equipped with a spindle overload protection device, to ensure your safety when compressing the spring, you can also better improve your work efficiency.
Package Content:
- 1 x compressor body
- 1 x spacer for 30 mm offset
- 6 x protective caps in yellow
- 1 x sturdy transport case
- 6 x retaining bolts
- 3 x pair of spring holders
65mm -125mm (application range 80mm- 115mm)
88mm - 160mm (application 110mm - 150mm)
125mm -215mm (applications 140mm - 195mm)
Guide：
- Retaining bolts( Fixed spring compressor，prevent spring holders from falling off. )
- Spring holders( Dureable and sturdy. The compressor body of spring compressor extractor tool is made of #40 carbon steel. )
- Compressor body( The yokes is made of #45 carbon steel. Can effectively jam the spring. )
- Hex nut(Turn the hex nut to compress the spring size. )
Batter work:
Process specification:
Maximum load: 16760 N
Destruction limit: about 41900 N
Washer with conical spring offset of 30mm
Made of #45 carbon steel
Spindle overload protection
Protective caps:
6pcs yokes with polyethylene protectors to help protect lacquered springs surface from damage.
Safety lip:
Spring holders with safety lip to prevent the spring from falling off. Protect your safety.
Guillermo Manuel Lugo Rosario
Reviewed in the United States on March 16, 2025
Works great
Gilles Jean Bourgeois
Reviewed in the United States on August 2, 2024
Purchase this tool to replace the shocks on my 2000 Toyota Tacoma for 140.00 vs spending $280.00- $340.00 to have a mechanic do the job. The tool worked very well. The yellow plastic housing does crack and break after use. But they still can be used again. Happy with this tool remedy, felt safe and at ease using this tool. Recommended!!!
Pablo Daniel Cortez
Reviewed in the United States on May 26, 2024
It works pretty good, but when I used it with very heavy duty coils/springs (Nissan Titan), the whole thing started to bend. It made me feel it was going to either break, or bend to the point of permanently damaging the tool, so I decided to stop. I ended up finishing the job by renting the basic tool from the parts store, placed one of them over on the oppositte side (to aid, so it would compress evenly) and it worked really good. Maybe with softer springs would work better?...I don't know, I'll have to wait and see....Also, the built quality is ok, but not the greatest. The pin holding the main nut used to turn and compress, fell off soon after I started using it.
Mark J
Reviewed in the United States on March 6, 2024
I bought this tool to facilitate the replacement of the struts on my 1997 LS 400. It is very well built. Heavy Duty and allows the use of an impact driver. It made short work of compressing the coil springs. We replaced the struts but then realized that we had made an error on two of them which meant that we had to remove them and compress the springs a second time. Even with my mistake and having to do two of the four twice, this tool made quick work of what is normally a very difficult, dangerous and time consuming tasks. I bought this tool for this one job, I may have the opportunity to use it again but if I only ever use this one time, I consider it to have been a bargain.
David Graham
Reviewed in Australia on March 3, 2024
Well built and it worked
Thomachaan
Reviewed in the United States on December 13, 2024
First time diving into suspension spring work, wanted a safe impact-rated compressor and this one had the good reviews.This is super heavy. I got a workout just assembling it. The whole kit is so heavy I feel like I got my money's worth. Handling the tool will add hairs to your chest.So far I used it on one strut. Original spring was broken. This compressed my replacement BMW sport spring with no problem. I used my Harbor Freight wall plug impact gun but you could totally use a normal rachet with ease, it'll just take forever. Once I felt safe that the spring wasn't going to fly out, I started working with it on my lap. There are nubs/tabs on the claws that make it nearly impossible to slip off by accident.Read and follow the directions carefully. If you can't tell the difference between the wrong & right example pics, look closer. Fine angles and alignment.Only issue I had is that the yellow plastic sleeves on the claws get mangled on first use. When working with relatively short spring spaces, you'll find the need to have to hammer on/off the claws (My 04 BMW 325xi front strut doesn't have enough spring loops to compress from the middle, so had to squeeze the claws into the thin gaps on the smaller spring loops towards top/bottom).I don't use the sleeves at all now - I feel safer using the bare metal claws. I'm not too worried about scratching the springs, just gotta be careful. In general it's is a rough job this tool was designed for, and I think it does great.
Richard P.
Reviewed in the United States on October 18, 2024
I used the spring compressor on one set of rear performance springs. They worked great. They didn't muck up the paint and I could almost compress the springs by hand. Most difficult part was getting the jaws out of the springs.
Customer
Reviewed in the United States on January 15, 2024
Bought this because an impact gun can be used on the tool. First time used to change out struts and it broke. The roll pin came out on the second strut being replaced. I’ve used a manufacturers tool like this at the dealership no issues. I will not take a chance with spring to the face because the tool came apart do to poor material quality.
mobile-user
Reviewed in the United States on August 19, 2023
Any SAAB C900 owner who has R&R'd front coil springs - and had to dance with The Devil's Twin-Screw Widowmakers - look no further than Your New Best Friend.This compressor's fit, grip, operation, and beefiness left us thinking we had gotten away with something. It was borderline too easy by comparison to the same job with Satan's Death Clamps.As others noted, this tool is very hefty - have your arms ready.5/5 stars ease of use.5/5 stars sturdiness.6/5 stars no damage to the wheel arches. C900 owners know what I'm sayin'.
Recommended Products
$89.99
$ 40 .99 $40.99