Your cart is empty.
Your cart is empty.Product Description
StanceMagic Wheel Accessories
We have in-depth knowledge of all of the products that we manufacture and carry. Over the years, we have developed a diverse line of products. We manufacture and sell a wide range of wheel spacers & adapters, as well as suspension components.
Spacer Specifications
- Thickness: 3mm
- Bolt Pattern: 5x114.3
- Centerbore: 66.1mm
- Material: T6 Aerospace Grade Aluminum
- Color: Silver
3mm 5x114.3 Hubcentric Wheel Spacers Compatible with many Nissan Infiniti Vehicles
Widen Your Track
Ride with style with StanceMagic wheel spacers, designed to fit multiple vehicles. Sometimes you need to fine tune your wheel fitment to get rid of that wheel gap. Or maybe you downgraded your tires and can't stand the sight of your wheels not fitting perfectly. Fret no more, these are the spacers for you!
Note: Professional Installation Recommended. Verify fitment before installation. Re-torque hardware after 25-50 miles.
- Works ONLY on vehicles with 5x114.3 bolt patterns.
- Vehicle MUST HAVE 66.1mm hub diameter.
- See below for compatibility list.
Compatibility List:
- NISSAN: 1995-1998 240SX (Will NOT fit Base Models) | 1987-1996 300ZX | 2003-2009 350Z (Requires removal of Wheel Guide Bolt on Front Rotor for proper installation) | 2009-2019 370Z (Requires removal of Wheel Guide Bolt on Front Rotor for proper installation) | 2002-2019 Altima | 1989-2018 Maxima | 2003-2019 Murano | 2008-2019 Rogue | 2007-2012 Sentra (SE-R & SE-R Spec V ONLY) | 2012-2019 Sentra
- INFINITI: 2003-2014 FX35 | 2003-2009 FX45 | 2009-2014 FX50 | 2003-2009 G35 | 2008-2014 G37 | 1996-2005 I30 | 2002-2005 I35 | 1992-1997 J30 | 2003-2011 M45 | 1990-2008 Q45 | 2014-2019 Q50 | 2014-2019 Q60 | 2014-2019 Q70 | 2014-2019 QX60 | 2014-2018 QX70
Matt Wiebe
Reviewed in Canada on September 19, 2024
Centre hub is roughly 66.1, though I have hub centric rings with my aftermarket wheels. Couldn't find anything, inquired and nothing. Suggested to clean hub, and rotate 1/5 until vibration was gone. As I did not have it in me to do this on all wheels, I returned them as I just wanted a bit of poke, wasn't having issues with clearance. 1 of them had a slight groove to it while mounted without the hub centric ring, honestly I'd say buyers beware. Refund went smoothly, but I don't think these were machined without flaw. Might have just been the rings I had to use to fit my 73mm OD-66.1mm ID wheels. If your wheels and hub are both the same size, might work for you, but if you're using hub centric rings, do not buy!! Hope this helps someone out.
Customer
Reviewed in the United States on August 31, 2024
Product is as described
Justin
Reviewed in the United States on March 12, 2024
Fit perfectly on my g37 coupe
karen boni
Reviewed in the United States on October 8, 2024
Purchased two sets. Two were not flush / flat. One had a rough finish inside some of the cut out holes. I sanded and cleaned rotor and wheel and torqued to spec. I hoped the two warped spacers would flatten out when torqued down (they probably did). Still experienced a very noticeable wobble at 65 mph. Oddly enough the wobble was on the front end and the warped spacers were in the back.
JA de Vooght
Reviewed in Canada on October 3, 2024
Used these spacers for a2021 Nissan Rogue - car comes with 19” wheels and I bought a good set of Infinity 18” wheels (for winter use) but the calipers just touched on the wheels and the 1/8 “ spacers made it a perfect fit.
SCULLY
Reviewed in Canada on October 17, 2024
I ordered these for a customer. He was happy after getting a set from another supplier that were too thick
Happy customer
Reviewed in the United States on January 19, 2023
Terrible product. G35 shakeswhen installed. No shakes without these spacers even though they are the correct ones.
Jose Rodriguez
Reviewed in Canada on October 19, 2022
I just needed 1.5mm / 2mm to clear my BBK (calipers scraping against wheel) this 3mm is perfect 66.1 ID and I don’t need a hubcentic kit or anything like that , fits perfect
Ezequiel Alejandro
Reviewed in the United States on October 14, 2022
Purchased these so my spare wheels can clear my rotors. Didn’t need much so a 5mm did the job. I ordered 2 by accident as I thought it was sold individually but turns out they come as 2 so threw the other in the rear because why not. With it being made from aluminum, cant complain much. Would be buying this brand again if need be.
Paul
Reviewed in the United States on July 10, 2021
Easy peasy. Took away all the vibration I had with el cheapo non hub cetric spacers. Just enough clearance for brakes and coilovers. Pleased with them for the price.
David Nadeau
Reviewed in Canada on June 13, 2021
Parfait pour ma infiniti q50 hybride
Jason Lim
Reviewed in the United States on October 13, 2019
Fit nicely! Thanks.
Lori Lusk
Reviewed in the United States on October 11, 2019
Needed just a little more clearance on my 240sx to clear my coilovers and these worked great. They look good and I haven't had any issues with them in the past month of ownership. No wobble or alignment issues I could notice, not even above 75+ mph.
Recommended Products