Your cart is empty.
Your cart is empty.Product Description
How to inatall Electric Engine Cooling Fan Clutch?
1. Remove the bolts and push pins that attach the intake air baffle to the radiator support, then remove the baffle. (On 2002s only)
2. Disconnect the transmission cooler lines at the engine bracket and fan shroud.
3. Disconnect the electro-viscous clutch electrical connector from the shroud.
4. Remove the upper radiator hose from the radiator; be prepared for coolant spillage.
5. Remove the fan clutch hub from the water pump by turning it counterclockwise.
6. Unclip the shroud from the radiator side panels then tilt the condenser and radiator forward. This will be easier if someone assists you.
7. Remove the fan and shroud as one unit by lifting straight up as the condenser and radiator are being held in the forward position.
8. The fan can now be unbolted from the clutch, if necessary. Be sure to tighten the fan-to-clutch bolts to the torque listed in this chapter's specifications(20 Ft.-lb.)
9. Installation is reverse removal, Tighten the fan hub nut to the torque listed in this chapter's specifications(41 FT.-Lbs)!
10. Check the coolant level, adding as necessary to bring it to the appropriate level.
OEM Part Numbers:
- 2625.
Other Part Number:
- 36980, 22148, 215101, 2911287, 922625, 4830R, 2625TM, 9202380, 1540313, 230255, 77281, FC2625
- Electric Engine Cooling Fan Clutch
- Package Included: 1 x Fan Clutch
- Material: Aluminum
- Conditon: Brand New
- OEM Part Numbers: 2625
R&B
Reviewed in the United States on November 21, 2024
Fits perfect and works well so far.
Jercel valenzuela encines
Reviewed in Mexico on July 22, 2023
Exelente producto asta orita todo muy bien trabaja perfecto
Jose U.
Reviewed in the United States on September 16, 2022
This clutch will only fit if your Jeep still has the stock radiator if you have any aftermarket ones that is thicker then stock, it will touch your radiator
Pen Name
Reviewed in the United States on June 5, 2021
Be aware that it is thicker than the original, so on my 96 Cherokee I had to remove the studs on the water pump in order to install.
tyler
Reviewed in the United States on March 6, 2020
Bought this thinking it would be cheap made. I was wrong fit perfact it even came with new hardwear very happy with product. Easy and fast shipping also
Mike
Reviewed in the United States on August 20, 2019
Used this on my 1986 Jeep Comanche that has a 4.0L out of a 1996 Cherokee and it fit perfectly. It works so well my truck hardly can get to the 210° operating temp now.
Zachary DeMille
Reviewed in the United States on June 14, 2019
Works perfectly
keith willis
Reviewed in the United States on December 24, 2019
Fit like a factory part
Mrteaze
Reviewed in the United States on November 27, 2019
Fit great performed perfect just as advertised
Recommended Products
$151.78
$ 71 .99 $71.99